DOI QR코드

DOI QR Code

Design and Verification of Shear Buckling Test Fixture for Composite Laminate

복합재 적층판의 전단좌굴시험을 위한 치구 설계 및 검증

  • Park, Sung-Jun (Department of Aerospace Engineering, Gyeongsang National University) ;
  • Ko, Myung-Gyun (Department of Aerospace Engineering, Gyeongsang National University) ;
  • Kim, Dong-Gwan (Department of Aerospace Engineering, Gyeongsang National University) ;
  • Kim, Sang-Kuk (Structure Design Department Research & Development Division, Korea Aerospace Industries) ;
  • Moon, Chang-Oh (Structure Design Department Research & Development Division, Korea Aerospace Industries) ;
  • Kweon, Jin-Hwe (Department of Aerospace Engineering.Research Ceneter for Aircraft Parts Technology, Gyeongsang National University) ;
  • Choi, Jin-Ho (School of Mechanical Engineering, Research Center for Aircraft Parts Technology)
  • Received : 2014.06.05
  • Accepted : 2014.08.27
  • Published : 2014.08.31

Abstract

Final goal of this research is to establish the database for correlation factors which connects the test and analysis results of shear buckling allowables for composite plate. To accomplish the goal, extensive test and analysis works are required. In this paper, as the first step, a frame-type fixture for shear buckling test was designed and validated through the test and analysis. Final configuration of the fixture were determined via parametric study on the effect of specimen size, cross-sectional dimensions, and number of fastening bolts on the shear buckling load. Results of the study showed the designed frame-type fixture successfully induces the shear buckling of composite plate. However, there were deviations between the test results and analysis results for ideal case under pure shear load, which were mainly caused by the difference in plate sizes for both cases. The difference were larger in the plates with larger hole and simply supported boundary condition. It is concluded from the results that while the designed fixture can be used for the clamped plates with acceptable accuracy, it shows larger difference in the simply supported plates.

본 연구의 궁극적 목표는 현장의 구조설계자들이 복합재 평판의 전단좌굴 설계허용치를 설정할 때 사용할 수 있는 환산계수(이론값과 실험값의 차이를 보정하는 계수)를 제공하는 것이다. 이를 위해서는 광범위한 시험과 해석이 필요하며, 본 연구에서는 일단계로, 복합재 평판의 전단좌굴시험을 위해 단축인장하중을 받는 프레임 형태의 치구를 설계하고, 시험과 해석을 수행하여 그 타당성을 검토하였다. 치구의 최종 형상은 시편의 크기, 치구의 치수, 체결볼트의 수 등의 변수들이 전단좌굴하중에 미치는 영향에 대한 인자연구를 통해 결정하였다. 시험 및 해석 결과, 설계된 프레임이 의도한대로 전단좌굴을 효과적으로 유도하는 것을 확인하였다. 그러나 시험에서는 시편이 치구에 고정되어야 하므로 시편의 크기가 달라지게 되어, 시험값과 해석값의 차이가 존재하였다. 특히 원공이 커질수록, 또한 단순지지 경계조건일 경우에는 그 차이가 더 크게 나타났다. 본 연구의 결과 고정지지 전단좌굴의 경우 설계된 프레임 형태 치구를 그대로 사용할 수 있을 것으로 보이지만, 단순지지 경계일 경우 경계조건 설정방법의 수정이 필요할 것으로 판단된다.

Keywords

References

  1. Kong, S.W., Lee, I.C., Kim, C.G., and Hong, C.S., "Buckling and Postbuckling Behavior of Composite Plate with a Hole," Journal of The Korean Society for Aeronautical and Space Sciences Vol. 24, No. 3, 1996, pp. 53-63.
  2. Kim, S., Kim, H.D., Lim, J.H., Hwang, D.S., and Park, J.S., "A Study of Buckling Load Coefficient Estimation for Plate with Hole," Proc. of The Korean Society Aeronautical and Space Sciences, 2011, pp. 106-110.
  3. Lee, S.J., and Yoon, S.H., "Buckling Behavior of Sandwich Composite Columns by Varying Hole Size and Hole Position," Journal of The Korean Society for Composite Materials, Vol. 25, No. 1, 2012, pp. 19-25 https://doi.org/10.7234/kscm.2012.25.1.019
  4. Jean, L., Gilles, H., Ahn, V.D., and Philippe, B., "Experimental Analysis of the Influence of Tensions on in Plane Shear Behaviour of Woven Composite Reinforcements," Composites Science and Technology, Vol. 68, No. 2, 2008, pp. 506-515. https://doi.org/10.1016/j.compscitech.2007.06.021
  5. Jose, D.D.M., Postbuckling Behavior of Composite Panels in Shear, Maine University Pess, 1993.
  6. Jauffres, D., Fetfatsidis, K., Winchester, D., Sherwood, J., and Chen, J., "Advances in Measurement of Shear and Friction of Woven Fabrics for Forming," Proc. of 17th International Conference on Composite Materials, 2009, pp. 26-29.
  7. Peng, X.Q., Cao, H., Chen, J., Xue, P., Lussier, D.S., and Liu, L., "Experimental and Numerical Analysis on Normalization," Composites Science and Technology, Vol. 64, No. 2, 2004, pp. 11-21. https://doi.org/10.1016/S0266-3538(03)00202-1
  8. Gilbert, L., Martin, N., and Johanne, D., "Evaluation of Biasextension and Picture-frame Test Methods for the Measurement of Intra Ply Shear Properties of PP/glass Commingled Fabrics," Composites Structure, Vol. 61, No. 4, 2003, pp. 341-352. https://doi.org/10.1016/S0263-8223(03)00057-6
  9. Lomov, S.V., Willems, A., Verpoest, I., Zhu, Y., Barburski, M., and Stoilova T., "Picture Frame Test of Woven Composite Reinforcements with a Full-Field Strain Registration," Textile Research Journal, Vol. 76, No. 3, 2006, pp. 243-252. https://doi.org/10.1177/0040517506061032
  10. Milani, A.S., Nemes, J.A., Lebrun, G., and Bureau, M.N., "A Comparative Analysis of a Modified Picture Frame Test for Characterization of Woven Fabrics," Polymer Composites, Vol. 31, No. 4, 2009, pp. 561-568.
  11. Taha, I., Abdin, Y., and Ebeid, S., "Comparison of Picture Frame and Bias-Extension Tests for the Characterization of Shear Behaviour in Natural Fibre Woven Fabrics," Polymer Composites, Vol. 14, No. 2, 2013, pp. 338-344.
  12. Gary, L.F., and Donald, J.B., "In-plane Shear Test of Thin Panels," Experimental Mechanics, Vol. 23, No. 1, 1983, pp. 81-86. https://doi.org/10.1007/BF02328685
  13. ISO 898-1, Bolts, Screws and Studs with Specified Property Classes - Coarse Thread and Fine Pitch Thread.

Cited by

  1. Fabrication and Evaluation of Integrated Composite Part for Aircraft using OoA (Out-of-Autoclave) Prepreg vol.29, pp.5, 2016, https://doi.org/10.7234/composres.2016.29.5.315