• East Asian mathematical journal
• /
• v.38 no.4
• /
• pp.439-461
• /
• 2022

Since 2022, textbooks in elementary school mathematics have been converted from national textbook system to authorization system, but it is pointed out that the composition of these new textbooks is almost the same as the existing national textbooks and the advantages of the authorization system cannot be utilized. Therefore a need has been raised to find out the composition of foreign textbooks. In order to compare the internal system of elementary mathematics textbook composition in Korea and Japan, Wakuwaku Sansu, one of Japan's elementary mathematical textbooks was analyzed and compared with Korean textbooks. As a result of the analysis, it was found that Japanese textbooks have more flexibility in the composition of the unit, the number of hours of the unit, the introduction of special lessons, and emphasis. This analysis will promote the diversity and creativity of the composition of elementary mathematics textbooks in Korea, providing implications for more efficient textbook compilation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.258-266
• /
• 2000

Experimental investigation and cycle simulation of a capacity modulation of a heat pump system using a hydrofluorocarbon (HFC) refrigerant mixture, R32/134a as an alternative to R22, have been done. In the cycle simulation, the refrigeration system was operated by assigning the temperatures of the external heat transfer fluids with the heat exchangers generalized by an average effective temperature difference. Heating capacity, cooling capacity, and coefficient of performance (COP) of the system were investigated at several operating conditions. Experimental apparatus which had a refrigeration part and a composition changing part was built, and the performance of the heat pump system filled with R32/134a mixture was investigated. A gas-liquid separator was used in the experiment to change the composition by collecting the vapor and the liquid Phase separately, The mass fraction of the charged refrigerant in the heat pump system was 40/60 and 70/30 by weight percentage. The composition of the refrigerant with initial composition of 40/60 varied from 29/71 to 41/59 in the refrigeration cycle. For the refrigerant with initial composition of 70/30, the composition varied from 65/35 to 75/25.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.5
• /
• pp.33-40
• /
• 2020

The purpose of this research is to provide the basic information for the development of dental healthcare system's expertise and spatial composition in diverse dental spaces in Korea according to dental specialist system enforcement. Literature review of dental expertise especially dental specialist system and investigation on current status of spatial composition of dental spaces have been conducted. After the review, the spatial composition with field survey and architectural drawings of selected dental spaces have been analyzed. The result of this study is arranged with three points. First of all, the main clinical dental spaces are the dental school's dental hospital, dental department in medical center/hospital and private dental clinic in Korea. The second one is that dental school's dental hospital had differentiated to 10-11 departments in 1970-1980's and dental department in medical center/hospital has been changing to dental hospital with 5-7 departments in 2010's, and dental clinic is changing to specific dental clinic according to dental specialist system in 2018. The third one is that spatial composition is related with dental expertise at diverse levels. Spatial composition in dental school's dental hospital had been highly differentiated with dental expertise, dental department in medical center/hospital is partially subdivided with dental specialist system, but that of dental clinic is not changed according to dental specialist system. In addition to current spatial composition according to dental expertise, it is necessary to analyze the change of spatial composition with diachronic methods to develop the dental healthcare system.

• Journal of architectural history
• /
• v.5 no.1 s.9
• /
• pp.73-86
• /
• 1996

This study is to analyze the geometrical composition system for the plan of S. Pietro by Michelangelo. In the result of study, the plan is based on the geometrical elements of circle square cross, and shaped to symbolize the Universe which consists of the Heaven the Earth the Man. The plan is constituted of the conception of composition into hierarchy and repetition intersecting 45 degree the same sized square with inscribed square in a circle. Such the geometrical composition system can be found out a large number of example to the geometrical composition of architecture and city planning from Vitruvius to Bramante and Da Vinci. This plan is disposed in balance as the regularly proportional system of 1:1, 1:2, 1:3, which is formed the principal space. And the interior space is constituted of the organic space system, expanding to the direction of horizontal, vertical(ascension), development for primary space and secondary space with center in the geometric composition system of altar.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.409-416
• /
• 2021

We are invented the movement composition technique that is to check the food adjacent-package status of the wireless-management movement monitoring level (WMMML) on the movement monitoring communication system. The movement monitoring level condition by the movement monitoring communication system is formatted with the adjacent-package system. As to inspection a wireless RFID of the wireless RFID, we are found of the movement value with wireless RFID by the adjacent upper take form. The concept of movement monitoring level is formatted the reference of wireless-management level for composition signal by the movement package communication system. Further symbolizing a food composition of the WMMML of the medium-minimum in terms of the adjacent-package communication system, and the movement wireless RFID package that was the movement value of the far composition of the Mo-MMCS-FA-_φMED-MIN with 5.80±1.20 units, that was the movement value of the convenient composition of the Mo-MMCS-CO-_φMED-MIN with 4.06±(-0.04) units, that was the movement value of the flank composition of the Mo-MMCS-MO-_φMED-MIN with 0.91±0.07 units, that was the movement value of the vicinage composition of the Mo-MMCS-VI-_φMED-MIN with 0.18±(-0.03) units. The adjacent package will be to look into at the food ability of the adjacent-package communication system with wireless RFID by the movement monitoring level on the WMMML that is supply the wireless communication by the movement monitoring level system. We will be possible to make effort of a communication system by the management signal and to put to use of the delivery data of RFID level by the delivery system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.4
• /
• pp.90-96
• /
• 2006

Computer simulation was carried out to develop the tracer composition of a high performance to be able to be observed by not only the naked eye but also the thermal imaging system attached to the weapon system. The results of computer simulation show that the optimum Mg content among the trace compositions is about 40% and the formulation consisted of Viton A has a higher flame temperature compared with that of chloride compound. But the only use of Viton A radiates a yellow light and the composition adding a chloride compound radiates the red light. The light intensity of the tracer composition involving Viton A is higher than that of chloride compound. The tracer composition involving Viton A shows more clear images in case of all tests.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2012

In this paper, we developed the composition system that it can efficiently edit camera recording data, images, office document such as powerpoint data, MS word data etc in real-time and broadcasting system that the file is made by the composition system. In this Study, we developed two kinds of algorithm; Approximate Composition for Optimization (ACFO) and Sequence Composition using Memory Que (SCUMQ). Especially, the system is inexpensive and useful because the system is based on mobile devices and PCs when lectures hope to make video institutional contents. Therefore, it can be contributed for e-learning and m-learning. In addition, the system can be applied to various fields, different kinds of multimedia creation, remote conferencing, and e-commerce.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2011

The effects of Sm:Ba:Cu composition ratio in SmBCO coated conductor on their superconducting properties were investigated. The SmBCO coated conductors were fabricated by reactive co-evaporation method using EDDC(Evaporation using Drum in Dual Chamber) system. In this system, we could obtain various samples with different composition ratios in a batch by the technique providing composition gradient at deposition zone. From the specimens prepared by EDDC system, we found that composition ratio is uniform parallel to the drum axis, but gradient along the circumferential direction of the drum. We installed a shield having parallelogram open area between the deposition chamber and the evaporation chamber in EDDC system, and attached a 30 cm long template, which is parallel to drum axis, onto the drum surface. In this configuration, we could obtain SmBCO coated conductors having a gradient composition along the length of template. We measured the composition ratios and surface morphologies with periodic interval by SEM and EDAX, and confirmed the profile of composition ratio. We also measured critical current using non-contact Hall probe critical current measurement system and thereby could plot composition ratio vs. critical current. The maximum critical current was obtained, and the surface morphology with the shape of roof tile was observed at the corresponding composition ratio of Sm:Ba:Cu = 1.01:1.99:4.87. It was also found that composition ratio had an effect on not only critical current but also surface morphology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.438-443
• /
• 2006

In this paper, We had proposed SDR module, and designed FPGA to compose with channel separation of broadband CDMA signal what have multiple FA. At decomposition and composition process of multiple FA CDMA signal, system only progress decomposition and composition of channel selected by software. Therefore, proposed system can manage base station transceiver system very effectively than the other way what send on all band of multiple CDMA signal. Also, it is possible that system sets again coefficient of each filter because it is consisted of SDR module. Therefore, we can easily control coefficient each filter according to base station transceiver system environment.