• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.406-419
• /
• 2011

This study was carried out to offer basic information on the wood anatomy of domestic yellow-poplar (Liriodendron tulipifera L.), a new plantation species selected by Korea Forest Service as one of the promising hardwood and bioenergy sources of the future, through comparison of stem wood with root wood in the qualitative and quantitative features. In the qualitative anatomical features, growth rings were distinct in stem wood but relatively less distinct in root wood. And stem wood appeared to have pores in radial multiples of 2 to 5, sometimes clusters but root wood to have pores in radial multiples of 2 to 3, rarely clusters. And numbers of bars in scalariform perforation plates were somewhat numerous in vessel elements of root wood than in those of stem wood. Interestingly, on the other hand, more extraneous materials in the wood rays of tap root than in those of lateral root and stem were confirmed in the chemical composition analyses. In the quantitative anatomical features, pore densities were significantly greater but vessel elements were considerably narrower in stem wood than in root wood. Vessel elements and wood fibers of root wood were considerably longer than those of stem wood. Rays were somewhat more numerous in stem wood than in root wood, and only ray heights of stem wood were more or less greater in cell numbers but both ray heights and widths of stem wood were lower in dimension than those of root wood. The anatomical differences between stem wood and root wood were thought to be associated with different growth environments between the stem above ground and the root below ground.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.138-146
• /
• 2014

Stem and root of Lindera erythrocarpa were described and compared in the wood anatomical aspects. Root wood appeared to differ from stem wood in the qualitative features of growth ring boundary, extraneous materials in vessel element and ray parenchyma cell, outline of ray, and sheath cell. In the quantitative features, there were differences between these two tissues in vessels per square millimeter, tangential diameter of vessel lumina, length of vessel element, and width of ray. These wood anatomical differences between stem above ground and root below ground were thought to be attributed to their different growth environments.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.1-13
• /
• 2001

Compression, lateral, and opposite woods in the stem and branch of rimu (Dacrydium cupressinum Lamb.), a softwood species indigenous to New Zealand, were described and compared in the anatomical aspects. Qualitatively, growth rings were wide in the compression wood, intermediate in the lateral wood, and narrow in the opposite wood. Tracheid transition from early wood to late wood was very gradual in the compression wood but was more abrupt in both the lateral and opposite woods. When viewed transversely, compression wood tracheids showed a roundish outline except at the growth ring boundary but lateral and opposite wood tracheids were angular to rectangular in outline. Intercellular spaces were occasionally detected in the compression wood except in the late wood at the growth ring boundary but were absent from both the lateral and opposite woods. Slit-like extensions of the bordered pit openings caused by the location of pit apertures within short and narrow helical grooves were observed in the compression wood tracheids but not in the opposite or lateral wood tracheids. In the compression wood tracheids, fine striations in the form of fine checks or grooves were observed on the lumen surfaces and the innermost $S_3$ layer of secondary wall was absent. In the tracheids of lateral and opposite woods, the $S_3$ layer was sometimes absent but occasionally highly developed. Cross-field pits in the compression wood appeared to be piceoid due to slit-like pit apertures but those in the lateral and opposite wood tracheids showed cupressoid to taxodioid. Quantitatively, compression wood tracheids were somewhat shorter than those of opposite or lateral wood in stem but not different from the opposite or lateral wood tracheids in branch. The walls were thicker in the compression wood than in the lateral or opposite wood. Uniseriate rays in the compression wood were fewer than in the lateral or opposite wood.

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.1
• /
• pp.5-11
• /
• 1983

This paper aims at gaining the informations atout the fibril angle at secondary walls of tracheids. The test specimens were taken from disks on stem wood of "Pinus koraiensis Sieb. et zucc". The method of measuring the fibirl angle was selected so-called "iodine method" that crystalline aggregates of iodine may be induced to form within the elongated interstices of the cellulose matrix of the secondary wall and that these elongated crystals are oriented parallel to the long axies of the fibrills of cellulose. The following conclusions may be drawn from the results of this investigation. 1) Gross average fibril angle was about $17.6^{\circ}$ on stem wood. 2) Its values seem to be greater for earlywood (avg.$19.8^{\circ}$) than for latewood tracheids (avg.$15.3^{\circ}$) in normal wood. 3) According to the increase of annual ring from pith to barks the orientation of fibril angle seems to be decrease gradually in normal wood. 4) In the case of height variation in trees the sample trees have a tendency to increase the orientation fibril angle to the increase of tree height in stem.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.890-896
• /
• 2016

Paulownia tomentosa is one of fast-growing wood species in Korea. In order to evaluate the solid bioenergy properties of Paulownia tree, this study examined the heating value, moisture content (MC), pH and proximate analysis of stem, branch, root, bark and leaf. The heating values of wood parts were slightly higher than those of bark and leaf, and that of branch was the highest among all the samples. The higher moisture content of bark and leaf referred to their lower heating value. Also, the pH of stem, branch and root was similar and lower than those of bark and leaf. The ash content of bark and leaf was much higher than that of wood parts, which is the one of the reasons for effect on the lower heating value and higher pH. While, the volatile matter content (VMC) of bark and leaf was lower than those of wood parts. The bark showed the highest fixed carbon content (FCC), while the FCC of stem was the lowest among all the samples. The obtained results are encouraging that the Paulownia tree could be totally utilized as alternative fuels for bioenergy production.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.104-112
• /
• 2011

There have been few reports on the constituents and biological activity of stem bark of $Acer$ $tegmentosum$, and no phytochemical and biological studies have been reported for stem wood of $A.$ $tegmentosum$. Two flavan 3-ols (1 and 2), three phenolic acid/alcohols (3~5), and two coumarins (6 and 7) were isolated from the stem wood of $A.$ $tegmentosum$ by repeated column chromatography. The structure of isolated compounds were identified as (+)-catechin (1), (-)-epicatechin (2), $p$-hydroxybenzaldehyde (3), syringic alcohol (4), $p$-tyrosol (5), scopoletin (6), and cleomiscosin A (7) on the basis of spectroscopic evidences such as $^1H$-NMR, $^{13}C$-NMR, 2D-NMR and MS spectrum. $p$-Hydroxybenzaldehyde (3), syringic alcohol (4), scopoletin (6), and cleomiscosin A (7) have not been reported from this plant so far. (+)-Catechin (1) and (-)-epicatechin (2) showed the higher 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity than butylated hydroxyanisole (BHA) used as a positive control.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.20-25
• /
• 1998

Radial variation of crystalline state in a stem of Chamaecyparis obtusa E. was examined by x-ray diffraction analyses. Relative crystallinity and degree of crystallite orientation showed significant differences between juvenile and adult wood. That is, Relative crystallinity increased with increasing the age from pith to about 20th annual ring, after which it reached a more or less constant value. On the other hand, degree of crystallite orientation decreased outward from pith to about 10 years and presented almost a constant value thereafter. Crystal width by Scherrer's equation did not show any significant differences between juvenile and adult wood. Therefore, it was considered that crystallinity index and degree of crystallite orientation by x-ray diffraction method could be used for evaluating wood quality.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.490-497
• /
• 2010

Radial variations in the lengths of wood fibers and vessel elements in the stem of chestnut (Castanea crenata) grown in Korea were investigated to get some fundamental information for efficient use of wood. Seven chestnut cultivars (Tanzawa, Ibuki, Arima, Ginyose, Tsukuba, Riheiguri, and Mansung) were examined in this study. The lengths of wood fibers and vessel elements were measured and analyzed by an optical microscope and an imaging analysis system. In all chestnut cultivars, the wood fiber length of latewood was longer than that of earlywood, and increased with the increase of growth ring number. Similarly, vessel element length of latewood was longer than that of earlywood, and showed increasing tendency with the increase of growth ring number. Consequently, it was considered that the lengths of wood fibers and vessel elements could be used for separating juvenile wood from adult wood in the chestnut stem.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.217-222
• /
• 1995

Experiments were conducted to study the effect of IBA, mineral stone and stem hardness on rooting characteristics in mature Aloe vera plant. The rooting ability in matured Aloe vera was of highly significance when the amount of IBA treatment was increased to 5.000mg/l. The treatment of IBA 5.000mg/l, together with mineral stone(v/w 1.5 times), gave more root number, the length and the dry weight of root were, also, higher in semihard wood cutting than soft wood cutting in matured Aloe vera.