• 제목/요약/키워드: SrS:Cu

검색결과 158건 처리시간 0.023초

$High-J_c\;NdBa_2Cu_3O_{7-{\delta}}$ thin films on $SrTiO_3$(100) substrates prepared by the PLD process

  • Wee, Sung-Hun;Moon, Seung-Hyun;Yoo, Sang-Im
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권2호
    • /
    • pp.1-6
    • /
    • 2009
  • We report a successful fabrication of $high-J_c\;NdBa_2Cu_3O_{7-{\delta}}$ (NdBCO) films on $SrTiO_3$(STO) (100) substrates by pulsed laser deposition (PLD) in a relatively wide processing window. Under various oxygen pressures controlled by either 1%$O_2$/Ar mixture gas or pure $O_2$ gas, strongly c-axis oriented NdBCO films were grown at the substrate temperature $(T_s)\;of\;800^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas and also in 400 and 800 mTorr with pure $O_2$ gas. These samples exhibited $T_c$ values over 90K and $J_c$ values of $2.8-3.5MA/cm^2$ at 77K in self-field (77K, sf). On the other hand, $J_c$ values over $1A/cm^2$ were obtained at the temperature regions of $700-830^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas at those of $750-830^{\circ}C$ in 800 mTorr with pure $O_2$ gas. Unlike previous reports, resent results support that the PLD processing window for high-Jc NdBCO films is not narrow.

증류수 계면처리를 이용한 고온초전도체 죠셉슨 접합 제작 (HTS Josephson Junctions with Deionized Water Treated Interface)

  • 문승현;박완규;계정일;박주도;오병두
    • Progress in Superconductivity
    • /
    • 제2권2호
    • /
    • pp.76-80
    • /
    • 2001
  • We have fabricated YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) ramp-edge Josephson junctions by modifying ramp edges of the base electrodes without depositing any artificial barrier layer. YBa$_2$Cu$_3$O/7-x//SrTiO$_3$ (YBCO/STO) films were deposited on SrTiO$_3$(100) by on-axis KrF laser deposition. After patterning the bottom YBCO/STO layer, the ramp edge was cleaned by ion-beam and then reacted with deionized water under various conditions prior to the deposition of counter-electrode layers. The top YBCO/STO layer was deposited and patterned by photolithography and ion milling. We measured current-voltage (I-V) characteristics, magnetic field modulation of the critical current at 77 K. Some showed resistively shunted junction (RSJ)-type I-V characteristics, while others exhibited flux-flow behaviors, depending on the dipping time of the ramp edge in deionized water. Junctions fabricated using optimized conditions showed fairly uniform distribution of junction parameters such as I$_{c}$R$_{n}$ values, which were about 0.16 mV at 77 K with 1$\sigma$~ 24%. We made a dc SQUID with the same deionized water treated junctions, and it showed the sinusoidal modulation under applied magnetic field at 77 K. 77 K.

  • PDF

Y$Ba_2$$Cu_3$$O_7$ 모서리 죠셉슨 접합의 균일성 (Uniformity of $YBa_2$$Cu_3$$O_7$ Step-edge Josephson Junctions)

  • 이순걸;황윤석;김진태
    • Progress in Superconductivity
    • /
    • 제2권2호
    • /
    • pp.81-85
    • /
    • 2001
  • Uniformity of critical currents of YBa$_2$Cu$_3$O$_{7}$ step-edge Josephson junctions on SrTiO$_3$(100) substrates have been studied at various step-line angles. 15 identical junctions were made in series on each substrate that has a long straight step-edge line. Step-line angles studied were 0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, and 45$^{\circ}$with respect to the crystal major axes of the substrate. Scattering of junction critical currents among the junctions on the same substrate increased with the step-line angle. Current-voltage curves showed standard resistively-shunted-junction (RSJ) characteristics in most of the 0$^{\circ}$junctions. However, the number of junctions showing RSJ behavior decreased with increasing step-line angle. Variations of detailed microstructure of the step-edge among junctions, which are coupled with the d-wave symmetry of YBa$_2$Cu$_3$O$_{7}$, are believed to be the main cause for the nonuniformity in the critical current.ent.

  • PDF

Comparison of microstructures in T1-1223/Ag tapes with different chemical compositions and J$_c$'s

  • Jeong, D.Y.;Kim, H.K.;Lee, H.Y.;Cha, M.K.;Ha, H.S.;Oh, S.S.;Tsuruta, T.;Horiuchi, S.
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.280-290
    • /
    • 1999
  • The microstructures of a Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.6}Ca_2Cu_3O_{9+{\delta}}$/Ag tape (tape I ) with J$_c$ of 17,600 A/cm$^2$ at 77 K and 0 T and three Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.8}Ba_{0.2}Ca_{2.2}Cu_3O_{9+{\delta}}$/Ag tapes with J$_c$'s of 9,300 (tape II), 16,700 (tape III) and 25,200 A/cm$^2$ (tape IV)prepared using the powder-in-tube method and an in-situ reaction method, were investigated using scanning electron microscopy and high-resolution transmission electron microscopy, and compared each other. ln the tape preparation, an intermediate rolling process was incorporated during final heat-treatment for the last tape, but not for the rest of the tapes. The microstructural analysis revealed clear differences in grain-texturing, crystallographic defects and impurity phases, depending on the chemical composition of the tape. Tendency of directional grain-alignment increased in an order of tapes I, II III and IV. In tape IV, T1-1223 grains are textured, at least in local regions. In crystallographic defects, while stacking faults were prevalent in the former composition, dislocations and voids were frequently observed in the latter. Also impurity phases were appeared to be more abundant in the former than in the latter. The relationship between 1,and the microstructure in the tapes was attempted to explain in a term of grain-linking.

  • PDF

전주, 군산, 남원지역 강수의 Sr, Pb동위원소 지화학 (The Sr and Pb Isotopic and Geochemical Properties of the Atmospheric Bulk Deposition of Jeonju, Gunsan, and Namweon Areas)

  • 전서령;정재일
    • 자원환경지질
    • /
    • 제38권4호
    • /
    • pp.463-479
    • /
    • 2005
  • 전북의 전주, 군산, 남원지역에서 주기적으로 채수된 강수(bulk deposition)를 지화학적으로 고찰하고 Sr과 Pb 동위원소의 환경추적인자로서의 적용 여부를 알아보고자 하였다. 강수는 pH $4\~7$의 약산성내지 산성을 띄며, 건기에는 높고, 우기에는 자연산성도 수준인 5.0수준을 유지한다. 강수에 의한 희석작용으로, 우기이후의 강수는 TDS 및 EC도 낮아지나 다시 건기에 들어서면서 상승한다. 겨울철에는 난방연료의 연소에 의해 $SO_4$$NO_3$이 높은 함량을 보이며, 여름철은 $CO_2$가스의 영향으로 탄산농도가 약간 높은 경향을 보인다 양이온은 겨울철에 Na의 함량이 높고, 봄부터 여름철에는 Ca의 함량이 높게 나타난다. 지리산에 인접한 남원이 전반적으로 낮은 EC 및 TDS값을 가지고 인구밀집과 도시화가 심한 전주지역은 대체로 높다. 남원지방은 다량의 수목의 호흡작용에 의한 대기중 이사화탄소의 함량이 높아 여름철 탄산 농도가 타 지역에 비해 높다. 군산지역은 해염의 영향으로 대기중 Cl의 함량이 높다. Al, Cu, Zn은 TDS와 상관계수 0.5이상의 양호한 상관관계를 보여 이들 원소가 미량원소 중 강수의 화학적 성상에 영향을 미치는 원소들 이라고 볼 수 있다. $^{87}Sr/^{86}Sr$ 값은 0.7109-0.7128으로 세 지역 모두 유사하며, 해수보다 다소 높은 값을 보이고 있어 주변의 토양입자, 꽃가루, 기타 인위기원의 에어로졸 등의 영향이 있음을 암시하나 지역 전반에 걸친 자세한 동위원소적 고찰이 있어야만 보다 정확한 해석이 가능할 것으로 생각된다. 강수의 Pb 동위원소 조성도 세 지역 모두 유사하며, 서울 에어로졸의 Pb 동위원소 조성 범위내에 포함되고 북경의 에어로졸 범위에서는 약간 벗어나 있다. 이는 한반도내의 대기 중에 함유되어 있는 Pb은 모두 유사한 기원으로 휘발유의 연소에서 발생하는 것으로 생각되며, 중국으로부터 기원한 Pb의 존재 가능성은 내포하고 있으나 그 기여율은 적을 것으로 보인다.

치환형 Sr-Ba 육방 페라이트들의 자기적 성질에 수소환원이 미치는 효과에 관한 Mossbauer 분광학적 연구 (Mossbauer Studies of the $H_2$ Reduction Effects On Magnetic Properties of Sr-Ba Substituted Hexgonal Ferrite)

  • 박재윤;권명회;이재광
    • 한국자기학회지
    • /
    • 제9권1호
    • /
    • pp.35-40
    • /
    • 1999
  • M-type Ba 페리이트를 Ba 대신 Sr으로 치환시킨 페라이트 분말과 Fe대신 Co-Ti으로 치환시킨 육방 페라이트 분말을 각각 citrate sol-gel법과 2 MOE sol-gel법으로 합성하였다. 이들 분말들을 소결 처리 후 수소 분위기 하에서 온도를 변화시키면서 환원처리 하였다. X-선 회절을 이용한 결정구조 해석에서 105$0^{\circ}C$에서 소결 처리된 분말의 경우 단일상의 M-type 육방정 구조로 나타났다. X-선 회절실험 결과 Sr0.5Ba0.5Fe12O19과 다르게, Co-Ti 치환형 페라이트인 Sr0.7Ba0.3Fe10CoTiO19에서는 Co-Ti 치환이 환원과정을 저지시키는 효과가 있는 것으로 나타났다. 육방 페라이트에서 수소환원에 의한 포화자화 Ms값의 증가 원인을 알아보기 위하여 Mossbauer 분광실험을 실시하였다. Mossbauer 실험결과는 대부분의 $\alpha$-Fe가 4fvi자리와 12k자리로부터 발생되는 것으로 나타났으며, 이 $\alpha$-Fe 형성에 의한 Fe3+이온의 결함이 자기 상호작용의 붕괴를 가져와서, 자기이방성의 변화를 초래하고 또한 Ms값의 증가를 가져오는 것으로 추측된다.

  • PDF

c-axis Tunneling in Intercalated Bi$_2Sr_2CaCu_2O_{8+x}$ Single Crystals

  • Lee, Min-Hyea;Chang, Hyun-Sik;Doh, Yong-Joo;Lee, Hu-Jong;Lee, Woo;Choy, Jin-Ho
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.260-260
    • /
    • 1999
  • We compared c-axis tunneling characteristics of small stacked intrinsic Josephson junctions prepared on the surface of pristine, I-, and HgI$_2$-intercalated Bi$_2Sr_2CaCu_2O_{8+x}$ (Bi2212) single crystals. The R(T) curves are almost metallic in I-Bi2212 specimens, but semiconducting in HgI$_2$-Bi2212 ones.· The transition temperatures were 82.0 K, 73.0 K, and 76.8 K for pristine Bi2212, I-Bi2212, and HgI2-Bi2212 specimens, respectively, consistent with p-T$_c$ phase diagram. Current-voltage (IV) characteristics of both kinds of specimens show multiple quasiparticle branches with well developed gap features, indicating Josephson coupling is established between neighboring CuO$_2$ planes. The critical current I$_c$ of I-Bi2212 is almost the same as of that of pristine crystals, but I$_c$ is much reduced in Hgl$_2$-Bi2212. In spite of expanded interlayer distances, the interlayer coupling is not significantly affected in I-Bi2212due to holes generated by iodine atoms. The coupling in HgI$_2$-Bi2212 is, however, weakened due to inertness of HgI$_2$ molecules and the expansion of interlayer distance. Relation between the superconducting transition temperature T$_c$ and the critical current I$_c$ seems to contradict Anderson's interlayer-pair-tunneling theory but agree with a modified version of it.

  • PDF

Ca 치환에 따른 (Sr.Ca)$TiO_3$계 세라믹스의 구조적 및 유전 특성 (Structural and Dielectric Properties of (Sr.Ca)$TiO_3$-based Ceramics with the Substitution of Ca)

  • 최운식;강재훈;서용진;김창일;김충혁;박용필
    • 한국전기전자재료학회논문지
    • /
    • 제14권11호
    • /
    • pp.879-884
    • /
    • 2001
  • In this paper, the structural and dielectric properties of (Sr$_{l-x}$Ca$_{x}$)TiO$_3$ (0$\leq$x$\leq$0.2) -based grain boundary layer ceramics were investigated by XRD, SEM and HP4194A. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1420~152$0^{\circ}C$ and 4 hours, respectively. The average grain size and the lattice constant were decreased with increasing content of Ca. The average grain size was increased with increase of sintering temperature. The relative density of all specimens was 96~98%. The 2nd Phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, $\varepsilon$$_{r}$>50000, tan $\delta$<0.05, $\Delta$C<$\pm$10%. The appropriate Ca content was under 15 ㏖%.s under 15 ㏖%.%.

  • PDF

Barrier Layers and Pulsed Laser Annealing Effects on TFEL Device with Cu and Ag co-doped SrS blue Phosphor Layer

  • Nam, Tae-Sung;Liew, Shan-Chun;Koutsogeorgis, Demosthenes C;Cranton, Wayne M
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.910-913
    • /
    • 2003
  • In order to enhance performance, stability, and brightness of inorganic blue-light emitting EL device, barrier layer structure and pulsed laser annealing(PLA) treatment were introduced. The barrier layer structure was utilized for improving brightness of the device and instead of thermal annealing, pulsed laser annealing process was used. From this study, optimum barrier layer thickness and number of pulsed laser irradiation are established.

  • PDF