• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.478-491
• /
• 1987

In this paper, an all Digital Phase-Locked Loop(DPLL) has been propoed, which has reduced the phase error by using a half period sampling in order to improve the performance of the conventional DPLL which tracks the phase of incoming sinusoidal signal once per cycle for the Positive Going Zero crossing(PGZC) of the signal. The proposed DPLL tracks the phase of input signal twice per cycle with two samplers for the PGZC. So the loop has a half reduction of the steady state phase error fluctuation ranges without decreasing the lock-range in a whole, comparing with that of the conventional DPLL. Also, it has been known that the proposed loop is rapidly locked to input signal for the same valves of phase differenc between sucessive samples and quantization level. The analytic results of the proposed loop have been verified by computer simulation for the practically requeired conditions.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.357-370
• /
• 2004

In this paper we propose Digital Signal Processing (DSP) techniques for the Equalization Digital On-Channel Repeater(EDOCR) in the ATSC digital TV (DTV) System. DSP techniques consist of demodulation. baseband equalization, and remodulation. Since the time delay caused by signal processing in the EDOCR can seriously affect the performance of ATSC legacy receivers, it is required that the processing time should be minimized as much as possible. To achieve this goal, we focus on the reduction of the EDOCR's time delay with the minimization of its performance degradation. In addition, we present recommended proper parameters for hardware implementation based on extensive simulation result.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.243-249
• /
• 2018

In this paper, we analyzed the effect of modulation scheme and modulation scheme on the dimming level of visible light communication system and studied the effect of distortion due to delayed signal. Currently, the modulation schemes most commonly used in visible light communication result in increasing the communication performance but reducing the brightness of the entire illumination. Continuous Burst Zero Duration will severely degrade lighting. This degrades not only the illumination but also the performance of the whole system and causes Flicker phenomenon. In this paper, we analyze the relationship between modulation technique and illumination - communication performance and investigate the effect of signal delay on visible light communication system. Through simulation, we analyze the performance of IPI-OOK which has the best communication-lighting performance and propose future research directions accordingly.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.3
• /
• pp.95-105
• /
• 2019

A method that applies space-time adaptive signal processing (STAP) algorithm based on an array antenna consisting of multiple antenna elements has been known to be effective to remove wide-band jamming signals in GPS receivers. However, the occurrence of phase distortion in navigation signals has been a problem when navigation signals, from which jamming signals are removed using STAP, are supplied to global positioning system (GPS) receivers. This paper verified the navigation performance degradation as a result of phase distortion. To mitigate this phenomenon, this paper proposes a mode switching scheme, in which a bypass mode is adopted to make the best use of the tracking performance of receivers without performing signal processing when jamming signals are not present or weak, and a STAP mode is employed when jamming signals exceed the threshold value. In this paper, the mode switching scheme is proposed for two environments: when receivers are stationary, and when receivers are moving. This paper confirmed that the performance of position error improved because phase distortion could be excluded due to STAP if the bypass mode was adopted under a condition where the jamming signal power level was below the threshold value in an environment where receivers were stationary. However, this paper also observed that the navigation failed due to the instability of tracking performance of receivers due to phase distortion that occurred at the switching time, although the number of switching could be reduced dramatically by proposing a dual threshold scheme of on- and off-thresholds that switched a mode due to the array antenna characteristics of varying gains according to the jamming signal incident direction in an environment where receivers were moving. The analysis results verified that running the STAP algorithm at all times is more efficient than the mode switching, in terms of maintaining stable navigation and ensuring position error performance, to remove jamming signals in an environment where receivers were moving.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.293-306
• /
• 2023

This study proposes and demonstrates a smart monitoring system that uses transmission lines embedded in a reinforced concrete structure to detect the presence of defects through changes in the electromagnetic waves generated and measured by a time-domain reflectometer. Laboratory experiments were first conducted to identify the presence of voids in steel-concrete composite columns. The results indicated that voids in the concrete caused a positive signal reflection, and the amplitude of this signal decreased as the water content of the soil in the void increased. Multiple voids resulted in a decrease in the amplitude of the signal reflected at each void, effectively identifying their presence despite amplitude reduction. Furthermore, the electromagnetic wave velocity increased when voids were present, decreased as the water content of the soil in the voids increased, and increased with the water-cement ratio and curing time. Field experiments were then conducted using bored piles with on-center (sound) and off-center (defective) steel-reinforcement cage alignments. The results indicated that the signal amplitude in the defective pile section, where the off-center cage was poorly covered with concrete, was greater than that in the pile sections where the cage was completely covered with concrete. The crosshole sonic logging results for the same defective bored pile failed to identify an off-center cage alignment defect. Therefore, this study demonstrates that electromagnetic waves can be a useful tool for monitoring the health and integrity of reinforced concrete structures.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2024

The main function of intercept array sonar is to detect pulses radiated from enemy surface ships, submarines, and torpedoes. When a pulse is detected, it is a high risk situation for the own ship, so it is very important to find the target's location for the ship's maneuverability and survival. The target's location is calculated by finding the starting point of the pulse received form each sensor and calculating the time delay between sensors. In order to find starting point, the envelope of the signal is calculated and differential filtering is performed. However, since intercept array sonar has a high sampling frequency of the signal, the number of samples to be processed is large, so this process has a problem with a large computational amount. In this paper, we propose a pulse starting point calculation method using decimation for reducing computational amount. Simulations were performed while changing the decimation factor, and it was confirmed that computational amount was reduced. The proposed method is expected to be effective in real-time processing system and have advantages in resource utilization.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.441-448
• /
• 2015

This study aims to suggest a reasonable signal operation method for right-turn traffic management. It was found that the right-turn vehicle supplementary signal is currently operated without clear regulations or criteria. It was also analyzed that right-turn supplementary signals are used without consistency, there is a risk of traffic accidents due to the discordance between supplementary signals and traffic signals of forward vehicles, there is a lack of basis for prohibition of a right turn when right-turn vehicle's supplementary signal is red and the flashing red signal is used in a different sense from the law. In order to see the effect of the installed right-turn vehicle supplementary signals on traffic signal violation, a field investigation was conducted. As the result, there was a high proportion of signal violation on the approach lane with right-turn supplementary signals and this means that right-turn supplementary signals hardly influenced the reduction in proportion of signal violation during a right turn. Additionally, a survey was carried out to see if there were differences in driver's interpretation of traffic signals depending on the installation of right-turn supplementary signals. As the result of the survey, there were no differences in interpretation of traffic signals depending on the installation of right-turn supplementary signals or the types of right-turn supplementary signals. A right turn when the signal was red did not lead to serious traffic accidents, so it is thought that there should be a careful consideration of a total ban on a right turn when the signal is red, in order to prevent driver's confusion due to the change of the signal system. Unless there is a disturbance to cars and pedestrians after a temporary stop when the signal is red, there is a need to specify that vehicles must stop temporarily in the Road Traffic Act to facilitate a right turn. What this study finally suggested is to use tri-colored arrow signals for right-turn car supplementary signals to convey a signal to a driver clearly.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.2
• /
• pp.132-139
• /
• 2002

This paper describes a supply voltage detector and SRAM write driver circuit which dissipates small power. The supply voltage detector generates high signal when supply voltage is higher than reference voltage, but low signal when supply voltage is lower than reference voltage. The write driver utilizes two same-sized drivers to reduce operating current in the write cycle. In the case of lower supply voltage comparing to Vcc, both drivers are active the same as conventional write driver, while in the case of high Vcc only one of two drivers are active so as to deliver the half of the current. As a result of simulation using 0.6${\mu}{\textrm}{m}$ 3.3v/5v, CMOS model parameter, the proposed SRAM scheme shows a 22.6% power reduction and 12.7% PDP reduction at Vcc=3.3V, compared to the conventional one.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.491-500
• /
• 2002

Magnetic anomalies in the Dokdo and it's surroundings were investigated with respect to structure and origin of the Dokdo and surrounding seamounts. After normal and diurnal correction of measured magnetic data, crossover correction was applied to reduce errors between sets of magnetic anomalies. The errors from crossover operation result in decrease of about 51%, from 62.2 nT to 30.1 nT in standard deviation. Reduction-to-the-pole, second vertical derivative and analytic signal processing were applied to explore magnetic anomaly signatures in detail. Magnetic anomalies are most complicated in the 1st-Dok seamount, show SWW-NEE linear pattern in the 2nd-Dok seamount and lower to the 3rd-Dok seamount. Different magnetic anomaly patterns in three seamounts imply that three volcanic seamounts were formed at different times and are composed of rocks that were produced in different conditions. It seems that the 3rd-Dok seamount was first to form and followed by the 1st-Dok seamount. The complicated magnetic and second vertical derivative anomaly patterns in the 1st-Dok seamount may be due to subsidiary cones around crater or the presence of intruded magma bodies below sea surface and the Dokdo is probably a marginal subsidiary part of crater.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.742-748
• /
• 2010

Instead of using sphere decoding, list sphere decoding (LSD) has been introduced to increase the reliability of log-likelihood ratio (LLR) in recent soft decoding schemes employing iterative detection and decoding (IDD). Although LSD provides improved performance, it does not obtain complexity gain due to signal-to-noise ratio (SNR) increment as it detects large number of lattice points. Especially, its inefficient scenario arises when it has to search for lattice points which have small affect for obtaining LLR with high reliability. In this paper, we study an efficient algorithm to remove such lattice points, which results in complexity reduction based on radius optimization.