• 제목/요약/키워드: SiGe HBT and VCO

검색결과 8건 처리시간 0.02초

C-band WLAN용 SiGe MMIC 차동형 전압제어발진기 설계 및 제작 (Fabrication and Design of a SiGe MMIC Differential VCO for C-band WLAN Applications)

  • 박민기;고호정;채규성;김창우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.767-770
    • /
    • 2003
  • A SiGe HBT MMIC differential VCO has been developed for C-band wireless LAN applications. The VCO produces -6.4 dBm output power at 4.75 GHz. The VCO exhibits a 490 MHz tuning range with control voltage from 0.5 V to 2.5 V. The phase noise of the VCO exhibits -106.5 dBc/Hz at 1 MHz offset from the 4.75 GHz carrier. The total current consumption of the VCO is 10 mA at a supply voltage of 3 V.

  • PDF

Phase Locked Loop Sub-Circuits for 24 GHz Signal Generation in 0.5μm SiGe HBT technology

  • Choi, Woo-Yeol;Kwon, Young-Woo
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권4호
    • /
    • pp.281-286
    • /
    • 2007
  • In this paper, sub-circuits for 24 GHz phase locked 100ps(PLLs) using $0.5{\mu}m$ SiGe HBT are presented. They are 24 Ghz voltage controlled oscillator(VCO), 24 GHz to 12 GHz regenerative frequency divider(RFD) and 12 GHz to 1.5 GHz static frequency divider. $0.5{\mu}m$ SiGe HBT technology, which offers transistors with 90 GHz fMAX and 3 aluminum metal layers, is employed. The 24 GHz VCO employed series feedback topology for high frequency operation and showed -1.8 to -3.8 dBm output power within tuning range from 23.2 GHz to 26 GHz. The 24 GHz to 12 GHz RFD, based on Gilbert cell mixer, showed 1.2 GHz bandwidth around 24 GHz under 2 dBm input and consumes 44 mA from 3 V power supply including I/O buffers for measurement. ECL based static divider operated up to 12.5 GHz while generating divide by 8 output frequency. The static divider drains 22 mA from 3 V power supply.

A 1.8 GHz SiGe HBT VCO using 0.5μm BiCMOS Process

  • Lee, Ja-Yol;Lee, Sang-Heung;Kang, Jin-Young;Shim, Kyu-Hwan;Cho, Kyoung-Ik;Oh, Seung-Hyeub
    • Journal of electromagnetic engineering and science
    • /
    • 제3권1호
    • /
    • pp.29-34
    • /
    • 2003
  • In this paper, we fabricated an 1.8 ㎓ differential VCO using a commercial 0.5 ${\mu}{\textrm}{m}$ SiGe BiCMOS process technology, The fabricated VCO consumes 16 ㎃ at 3 V supply voltage and has a 1.2 $\times$ 1.6 $mm^2$TEX>chip area. A phase noise measured at 100 KHz offset carrier is -110 ㏈c/Hz and a tuning range is 1795 MHz~1910 MHz when two varactor diodes are biased from 0 V to 3 V.

High-Q 병렬분기 인덕터를 내장한 2.4 GHz SiGe VCO (A 2.4 GHz SiGe VCO having High-Q Parallel-Branch Inductor)

  • 이자열;서동우;배현철;이상흥;강진영;김보우;오승엽
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
    • /
    • pp.213-216
    • /
    • 2004
  • This paper describes design and implementation of the 5.5 GHz VCO with parallel-branch inductors using 0.8${\mu}m$ SiGe HBT process technology. The proposed parallel-branch inductor shows $12 \%$ improvement in quality factor in comparison with the conventional inductor. A phase noise of -93 dBc/Hz is measured at 100 kHz offset frequency, and the harmonics in the VCO are suppressed less than -23 dBc. The single-sided output power of the VCO is -6.5$\pm$1.5 dBm. The manufactured VCO consumes 15.0 mA with 2.5 V supply voltage. Its chip areas are 1.8mm ${\times}$ 1.2mm.

  • PDF

능동 고조파 결합을 이용한 SiGe HBT 4위상 전압제어발진기 (A SiGe HBT Quadrature VCO using active super harmonic coupling)

  • 문성오;김병성;주재홍;이문규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.2064-2066
    • /
    • 2004
  • 본 논문에서는 새로운 개념인 능동 고조파 결합을 이용한 4위상 전압제어 발진기를 설계, 제작하였다. 4위상 출력 특성을 얻기 위하여 각각의 차동 VCO의 가상 접지(Virtual Ground)면을 본 논문에 제시된 능동 고조파 결합 회로(Active super harmonic coupling)을 이용하여 결합시키는 방법을 적용하였다. 제안된 구조는 다음과 같은 장점을 가지고 있다. 결합구조를 갖는 트랜지스터에 부가적인 전류소비를 줄일 수 있으며, layout상에서 문제되었던 대칭구조를 개선할 수 있다. 또한 기존에 발표되었던 방법인 passive transformer를 이용한 고조파 결합 보다 회로 크기를 줄일 수 있다. 측정결과 출력 전력 -12dBm, -117dBc/Hz @1-MHz 이하의 위상잡음 특성, 2.66GHz${\sim}$2.91GHz의 250 MHz 주파수 가변, 25dB이하의 2차고조파 억압, 7 mA 의 전류 소모(buffer amp. 포함되지 않음)를 가졌다.

  • PDF

A Low Phase Noise 5.5-GHz SiGe VCO Having 10% Bandwidth

  • Lee Ja-Yol;Park Chan Woo;Bae Hyun-Cheol;Kang Jin-Young;Kim Bo-Woo;Oh Seung-Hyeub
    • Journal of electromagnetic engineering and science
    • /
    • 제4권4호
    • /
    • pp.168-174
    • /
    • 2004
  • A bandwidth-enhanced and phase noise-improved differential LC-tank VCO is proposed in this paper. By connecting the varactors to the bases of the cross-coupled transistors of the proposed LC-tank VCO, its input negative resistance has been widened. Also, the feedback capacitor Cc in the cross-coupling path of the proposed LC-tank VCO attenuates the output common-mode level modulated by the low-frequency noise because the modulated common-mode level jitters the varactor bias point and degrades phase noise. Compared with the fabricated conventional LC-tank VCO, the proposed LC-tank VCO demonstrates $200\;\%$ enhancement in tuning range, and 6 - dB improvement in phase noise at 6 MHz offset frequency from 5.4-GHz carrier. We achieved the phase noise of - 106 dBc/Hz at 6 MHz offset, and $10\;\%$ tuning range from the proposed LC-tank VCO. The proposed LC-tank VCO consumes 12 mA at 2.5 V supply voltage.

휴대 GPS 수신기용 RF IC, 신호처리 IC 및 소프트웨어 개발 (Development of RF IC, Signal Processing IC and Software for Portable GPS Receiver)

  • 염병렬;구경헌;송호준;지규인
    • 한국항행학회논문지
    • /
    • 제1권1호
    • /
    • pp.23-34
    • /
    • 1997
  • 다채널 디지털 GPS 수신기를 구현하기 위하여 RF-to-IF엔진 (엔진 1), 신호처리 엔진 (엔진 2), 항법 소프트웨어를 개발하였다. 고속 SiGe HBT률 이용한 LNA, 믹서, VCO 등의 하이브리드 IC를 COB형태로 구현하여 엔진 1 보드에 부착하였다. 6채널 디지털 상관기를 클락 및 마이크로프로세서 인터페이스와 함께 Altera Flex 10K FPGA 및 ASIC 기술로 구현하였다. 항법 소프트웨어는 GPS 신호의 트래킹 및 획득을 위한 상관기 제어, 메시지 저장, 위치 계산 등을 수행한다. 개발된 GPS수신기는 단일 채널 신호를 발생하는 STR2770 시뮬레이터를 이용하여 테스트하였는데, 성공적인 항법 신호획득 및 위치 계산 결과를 확인하였다.

  • PDF