• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.136-142
• /
• 2006

Existing buffer management schemes for shared-memory output queueing switches can be classified into two types: In the first type, some constant amount of memory space is guaranteed to each virtual queue using static queue thresholds. The static threshold method (ST) belongs to this type. On the other hand, the second type of approach tries to maximize the buffer utilization in 머 locating buffer memories. The complete sharing (CS) method is classified into this type. In the case of CS, it is very hard to protect regular traffic from mis-behaving traffic flows while in the case of ST the thresholds can not be adjusted according to varying traffic conditions. In this paper, we propose a new buffer management method called weighted dynamic thresholds (WDT) which can process packet flows based on loss priorities for quality-of-service (QoS) functionalities with fairly high memory utilization factors. We verified the performance of the proposed scheme through computer simulations.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.88-96
• /
• 2001

Future mobile communication networks, which consist of ATM-based B-ISDN backbone networks and wireless ATM networks, will provide u user with broadband connection and QoS service. These network systems need the lossless handoff methods which support user mobility, satisfy ATM features such as ATM cell ordering and no ATM cell duplication and minimize buffer requirement for ATM cell buffering. In this paper we suggest a multicast-based handoff method to supp$\alpha$t lossless connection as well as to minimize buffer overhead. It establishes a dynamic multicast connection between source terminal and wireless member AP (access point)s. When the mobile terminal receives data packet correctly, it notifies the positive acknowledgement of the packet to all member APs. And member APs then release the MT related temporary buffer space for MT's future movement. Therefore member APs can eliminate unnecessary buffer usage and manage the buffer space efficiently. Analysis result shows that our handoff method has better performance in buffer requirement for lossless and seamless connection services over VCT (virtual connection tree) method and other dynamic multicast-based handoff methods.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.955-962
• /
• 2002

The microstructure change of brazed $Si_3N_4$/Stainless steel 316 joint with Cu buffer layer were examined to clarify the effects of brazing process conditions such as brazing time and temperature on the mechanical properties and reliability of brazed joints. For the brazed joint above 900${\circ}C$, the Cu buffer layer was completely dissolved into brazing alloy and the thickness of reaction product formed at $Si_3N_4$/brazing alloy joint interface was abruptly increased, which could increase the amounts of residual stress developed in the joint. The fracture strength of brazed $Si_3N_4$/Stainless steel 316 joint with Cu buffer layer at 950${\circ}C$ was much reduced comparing to those of joints brazed at the lower temperature. But, it was found that the effects of brazing time was not critical on the mechanical properties as well as the reliability of $Si_3N_4$/Stainless steel 316 joint with Cu buffer layer brazed at the temperature below 900${\circ}C$.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.249-257
• /
• 2019

Baker's yeast(Saccharomyces cerevisiae) was used as a biocatalyst for eco-friendly indigo dyeing and the reducing power of yeast according to the alkaline solution type was compared. NaOH solution, lye, and buffer solution were used as alkaline solutions. The reducing power(K/S value, oxidation/reduction potential(ORP), pH) was monitored according to the elapsed time including the initiation of reduction, peak reduction, and the end of reduction. In all alkaline solutions, it was confirmed that yeast can be used reducing agent in indigo reduction dyeing. The pH stability and reducing power of buffer solution was better than that of NaOH alone. Although, pH and ORP stability of the reduction bath in lye were better than that of buffer solution, K/S value in buffer solution was higher compared to lye. The reducing power was different depending on the starting pH of the dye bath, and it was better when starting at pH 10.70 than at pH 11.30. Fastnesses to washing, rubbing, and light were relatively good with above rating 4. There was no significant difference in colorfastness depending on the type of alkaline solutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.751-759
• /
• 2009

Due to the advance of WLAN technology, the use of the multimedia service such as the video streaming service has been increased in the home network. However, we need to study the method which decreases the transmission delay and the frame loss rate to provide QoS of the video streaming service. Therefore, this paper proposes an active buffer management mechanism to guarantee QoS of the streaming service in IEEE 802.11e EDCA. The proposed protocol discards the frame in the HoL of the buffer based on the importance of each frame and the virtual transmission delay of frame newly arriving at the buffer. In the simulation results, the proposed algorithm not only decreases the frame loss probability of important I and P frames but also stabilizes the transmission delay. It may increase the QoS of video streaming services.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.2
• /
• pp.140-145
• /
• 2002

A new CMOS buffer removing short-circuit power consumption is proposed. The gate-driving signal of the pull-up(pull-down) transistor at the output is controlled by delayed internal signal to get tri-state output momentarily by shunting off the path of the short-circuit current. The SPICE simulation results verified the operation of the proposed buffer and showed the enhancement of the power-delay product at 3.3V supply voltage about 42% comparing to the conventional tapered CMOS buffer(1).

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.36-42
• /
• 1997

This paper proposes a high-speed contention resolution scheme featuring high flexibility to the bursty traffic for an input buffering ATM switching architecture and its hardware strategy. The scheme is based on the threshold on the occupancy of the input buffer. As the proposed scheme utilizes the threshold, it has high flexibility to the fluctuations of the input traffic. The hardware strategy for the proposed policy is provided with the aim of the simple structure that achieves the reduction of the signal path and the power consumption. The performance on the average buffer size of the proposed policy is performed and compared with the conventional schame under the bursty traffic through both the analysis based on the markov hain and the simulation. The relations among the parameters on the proposed policy is analyzed to improve the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.514-520
• /
• 2004

In WDM networt a WDM buffer is one of essential elements for realizing all-optical packet switching system. In this paper, we propose and demonstrate a single loop type all-optical WDM buffer system. The proposed one consists of NOLM and feedback loop, and provides more than 40 turns buffering (more than 20${\mu}\textrm{s}$) for single input pulse (1550nm, width: 20㎱) before selected by control signal pulse (1553nm, width: 30㎱).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.661-662
• /
• 2009

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.434-435
• /
• 2008

An in-situ monitoring technique for deposition process of CdS buffer layer was developed in this work. A quartz crystal microbalance (QCM) was used to measure the frequency change during the CdS deposition process and the relation ship between frequency change and film thickness and optical transmittance was investigated. The film thickness shows a linear relationship with frequency change, demonstrating that frequency change measured by QCM can be used a in-situ monitoring tool for CdS deposition process.