• 한국습지학회지
• /
• 제14권4호
• /
• pp.637-644
• /
• 2012

습지 생태계 및 하천에서 가장 중요한 요소인 유량의 산정은 항상 중요한 관심사였다. 이러한 유량의 산정은 그동안 수위유량 관계곡선에 의존하여 왔으나 수위와 유량만의 관계를 이용하는 수위-유량곡선의 한계점은 널리 알려져 있다. 따라서 본 논문에서는 개수로에서 널리 사용되는 Manning식과 Chezy식을 사용하여 구간 내 대표 매개변수 산정법을 통하여 유량 산정 방안을 제안하였다. 각각의 결과는 RMSE와 Discrepancy Ratio를 사용하여 나타내었고 실험실 수로와 자연하천에서 측정된 데이터에 대한 결과의 차이는 존재하였으나 산정된 유량과 측정된 유량 사이가 비교적 잘 일치함을 알 수 있었다. 지속적인 연구를 통하e여 여러 하천에 대한 검증이 이루어지고 개선이 이루어진다면 쉽고 빠르게 하천의 유량을 산정할 수 있으므로 수자원 분야에 활용될 수 있을 것으로 기대한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.231-234
• /
• 2000

The corona in oil, the surface discharge in oil, the void discharge which could be in a transformer were imitated by using three electrodes with different shapes and the frequency bands of each ultrasonic signal were measured. After emitting artificial noises toward the transformer, only ultrasonic signals were extracted by frequency filtering, from the ultrasonic signals with noises at partial discharge. As a result, it was confirmed that the ultrasonic signals due to the corona in oil, the surface discharge in oil, the void discharge could be distinguished from the noises.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1533-1537
• /
• 2005

The recent rainfall has happened to exceed the design rainfall after 1990 often, due to the characteristic of the rain to be changed. So, it is failing the ability safety of flood defense equipments to exist. This study analyzed the rainfall of Busan in 2003 since 1961 through the FARD2002(Frequency Analysis of Rainfall Duration). The result is equal to the thing which the design rainfall increased a little since 1991. The change of design rainfall created the result to be a flood discharge increase. This study investigated about the impact to influence on the river bank according to the change of flood discharge, the rainfall pattern change as well. This study used the program of HEC-RAS with HEC-HMS and calculated flood discharge with flood level of river. The result is equal to the thing which the computation became a flood level which exceed 50year(River design criteria-Korea water resources association 2002) criteria with 30year(River establishment criteria-Ministry of construction & transportation 1993), because of an area of impermeability increased of model basin.

• 한국환경과학회지
• /
• 제22권5호
• /
• pp.591-597
• /
• 2013

For Kangjeong stream and Akgeun stream in the central part of the southern Jeju Island, on-site discharge estimation was carried out for approximately 10 months (July 2011-April 2012) twice a month on a regular basis by using ADCP (acoustic doppler current profiler) and long term rate of discharge was calculated by using SWAT (soil and water assessment tool) model. The discharge was $0.28-1.30m^3/sec$ for Kangjeong stream and $0.10-1.54m^3/sec$ for Akgeun stream. It showed the maximum in the summer and the minimum in the winter. As a result of parameter sensitivity analysis of SWAT model, CN (NRCS runoff curve number for moisture condition II), SOL_AWC (available water capacity of the soil layer), and ESCO (soil evaporation compensation factor) showed sensitive responses. By using the result, the model was corrected and the rate of discharge was calculated. As a result, the annual discharge rate was 27.12-31.86(%) at the Akgeun basin and 23.55-28.43(%) at the Kangjeong basin.

• 한국물환경학회지
• /
• 제25권2호
• /
• pp.281-287
• /
• 2009

Achieved monitoring regularly about fishway that is a intake dam belongings to Kyeongchon for 5 years. Result that achieve monitoring, discovered pressing issue of opening and closing degree of discharge control part in fishway. In this research, analyze discharge relation with fishway and intake sluice and presented operation plan of opening and closing of discharge control part. Investigated necessity intake discharge and benefited area to analyze relation of discharge that is flowed in fishway and discharge escaping by intake sluice. When opened discharge control part step by step gradually, analyzed discharge. Compared with survey discharge making ration curve of fishway and intake sluice using orifice and submerged weir formula. Because operation of intake dam is necessary intake discharge and upriver inflow discharge by time, operation uses by survey discharge and calculated opening discharge of fishway by opening discharge of intake sluice via monthly inflow discharge. To sum up, calculated floodgate opening height of fishway by water level to present maintenance standard of intake dam.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.34-39
• /
• 2015

In this study, the characteristics of partial discharge was measured for the four core silicone cable (0.6/1.0 kV, $1.0SQ{\times}4C$) with insulated part of 15 cm and conductor of 1cm. The following results have been confirmed as a result of this study. When the first line of cable is connected to the positive electrode and the second, third line of cable is connected to the negative electrode, it found that the inception voltage and extinction voltage decreased with increasing the line of negative electrode, and the partial discharge charge quantity(Q) increases, while the number of discharge occurrence has decreased. The inception voltage and extinction voltage of partial discharge has decreased with increasing the degradation rate in the 33%, 67%, 100%. Also, it confirmed that the partial discharge charge quantity(Q) and the number of discharge occurrence has decreased.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.780-786
• /
• 2007

This paper describes the influence on partial discharge characteristics of defects at the model XLPE/EPDM interfaces of power cable joints. The defects of void and copper which could inadvertently be present at the joint interface. We measured ${\Phi}-n,\;{\Phi}-q$ patterns by a computer-aided partial discharge measuring system. Several parameters i, e, maximum discharge $q_{max}$ [pC], average discharge q [pC/cycle], and average angle of discharge ${\Theta}g$ [deg] were found to depend upon the defect type varying applied voltage. As the result of time evaluation, partial discharges are small different at copper defects, but is decreasing obviously about 20 minutes at void defect. It considered that difference of magnitude of total positive discharge of Q+ [pC] and total negative discharge of Q- [pC] is SPMD(swarming pulsive micro discharges).

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.34-39
• /
• 2004

본 연구에서는 새로 고안된 AND gate PDP의 AND gate를 구성하는 4개의 DC 방전셀에 대한 상호간의 영향을 방전특성 측면에서 규명하였다. 이 4개의 방전셀들의 방전개시 전압은 인접한 방전셀의 방전에서 발생하는 공간전하와 깊은 관련이 있다는 것을 알았다. 실험 결과 각 방전셀의 최적화된 방전 전압을 결정할 수 있었으며 PDP의 address 방전에 이용되는 floating 방전을 도와주는 priming 방전의 동작마진을 얻기가 어렵다는 것을 정석적으로 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.947-952
• /
• 2006

It has been confirmed that the inner defect of insulator and the perfect diagnosis for aging are closely related to safe electric power transmission system and that the detection of accident and diagnosis technique turn out to be very important issues. But perfect diagnosis is difficult because discharge pattern is irregular. Thus, we investigated discharge pattern using the new distribution statistical models with cross-inked polyethylene(XLPE) specimens. Voltage was applied to power frequency by step method, and calibration of discharge was set to 50 pC. After the voltage was applied, it measured the discharge occurring during 10s. We investigated discharge pattern using the K-means analysis and Weibull function. We also investigated variation of centroid and shape parameter due to variation of voltage. As a result of analyzing K-means, it was confirmed that cluster including many object numbers was formed by the presence of void. And result of Weibull distribution, it was confirmed that shape parameter of discharge varied from 1.28 to 1.62 in no void specimens, and that shape parameter of discharge number varied from 1.28 to 1.62. In the void, shape parameter of discharge varied from 5.66 to 6.43, and shape parameter of discharge number varied from 5.05 to 5.08.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.9-15
• /
• 2005

본 연구는 새로 고안된 부정-논리곱 논리기능을 가지는 방전 논리 게이트 플라즈마 디스플레이 패널의 논리 게이트 방전특성을 해석한 것이다. 이 방전 논리 게이트는 방전 경로에 따른 전극사이의 전압을 제어하여 논리 출력을 유도한다. 실험결과 논리 게이트의 방전특성은 두 수직전극에 인가되는 전압들의 상호관계에 영향을 받는다는 것을 알았다. 그리고 대화면 PDP에의 적용 가능성을 검토하기 위하여 전극의 선저항에 의한 방전특성을 평가한 결과, 두 수직전극들의 선저항에 의한 전압강하가 논리 게이트의 방전에 미치는 영향은 미미한 것으로 추론되었다. 실험을 통해 방전 논리 게이트를 구성하는 각 전극들의 펄스전압과 전류제한저항의 최적 값들을 구하였으며 49[V]의 최대동작마진을 얻었다.