• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1513-1527
• /
• 2011

This paper investigates the capacity rate problems for a joint decode-and-forward (JDF) based two-way relaying with network coding. We first characterize the achievable rate region for a conventional three-node network scenario along with the calculation of the corresponding maximal sum-rate. Then, for the goal of maximizing the system sum-rate, opportunistic relay selection is examined for multi-relay networks. As a result, a novel strategy for the implementation of relay selection is proposed, which depends on the instantaneous channel state and allows a single best relay to help the two-way information exchange. The JDF scheme and the scheme using relay selection are analyzed in terms of outage probability, after which the corresponding exact expressions are developed over Rayleigh fading channels. For the purpose of comparison, outage probabilities of the amplify-and-forward (AF) scheme and those of the scheme using relay selection are also derived. Finally, simulation experiments are done and performance comparisons are conducted. The results verify that the proposed strategy is an appropriate method for the implementation of relay selection and can achieve significant performance gains in terms of outage probability regardless of the symmetry or asymmetry of the channels. Compared with the AF scheme and the scheme using relay selection, the conventional JDF scheme and that using relay selection perform well at low signal-to-noise ratios (SNRs).

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.213-214
• /
• 2008

In this paper, we analyze the performance of a cooperative communication wireless network over independent and identically distributed (IID) Nakagami-m fading channels. A simple transmission scheme is considered where the relay is operating in amplify-forward (AF) mode. A closed-form expression for symbol error rate (SER) is obtained using the moment generating function (MGF) of the total signal to noise ratio (SNR) of the transmitted signal with binary phase shift keying (BPSK).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.275-280
• /
• 2016

In this paper, we propose a novel relay selection technique which utilizes a priori decoding information at relays for buffer-aided successive relaying networks. In the conventional relaying schemes, a single relay pair is selected for receiving data from the source and transmitting data to the destination. In the proposed technique, however, all relays except the relay selected for transmitting data to the destination try to decode the received signal from the source, and they store the data if they succeed decoding. The proposed technique selects the relay such that it can succeed its own transmission and it maximizes the number of relays successfully decoding the data from the source at the same time. It is shown that the proposed relaying technique significantly outperforms the conventional buffer-aided relaying schemes in terms of outage probability through extensive computer simulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.163-168
• /
• 2010

In this paper, we propose novel two-way relaying scheme in which number of two users transmit the signal to number of two destination. The scheme is difference with conventional multi-hop two-way relay scheme in which number of two users exchange the each signal. In the conventional scheme, each user have to perform back-propagating self-interference method to remove the own signal from received signal. It occurred to increase the complexity for signal processing at the user. To overcome the problem, we apply the Pre-cancellation which can reduce the process of back-propagating self-interference to our proposal network Simulation result show that proposal scheme outperform the convention multi-hop two-way relay scheme. Also we analysis the trad-off between performance and complexity accordance with using Pre-cancellation method.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.495-496
• /
• 2007

An Over Current Relayng algorithm using 80c196kc micro processor was realized in this paper. This OCR Algorithm was verified with simulated fault signal. The fault signal was made by EMTP and realized by DOBLE to compare H/W test with S/W test. This simulations showed similar result between H/W and S/W test.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.433-441
• /
• 2010

Multihop transmission is a promising technique that helps in achieving broader coverage (excellent network connectivity) and preventing the impairment of wireless channels. This paper proposes a cluster-based multihop wireless network that makes use of the advantages of multihop relaying, i.e., path loss gain, and partial relay selection in each hop, i.e., spatial diversity. In this partial relay selection, the node with the maximum instantaneous channel gain will serve as the sender for the next hop. With the proposed protocol, the transmit power and spectral efficiency can be improved over those in the case of direct transmission and conventional multihop transmission. Moreover, at a high signal-to-noise ratio (SNR), the performance of the system with at least two nodes in each cluster is dependent only on the last hop and not on any of the intermediate hops. For a practically feasible decode-and-forward relay strategy, a compact expression for the probability density function of the end-to-end SNR at the destination is derived. This expression is then used to derive closed-form expressions for the outage probability, average symbol error rate, and average bit error rate for M-ary square quadrature amplitude modulation as well as to determine the spectral efficiency of the system. In addition, the probability of SNR gain over direct transmission is investigated for different environments. The mathematical analysis is verified by various simulation results for demonstrating the accuracy of the theoretical approach.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.711-732
• /
• 2019

Many unmanned aerial vehicle (UAV) applications have been employed for performing data collection in facilitating tasks such as surveillance and monitoring objectives in remote and dangerous environments. In light of the fact that most of the existing UAV relaying applications operate in conventional half-duplex (HD) mode, a full-duplex (FD) based UAV relay aided wireless network is investigated, in which the UAV relay helps forwarding information from the source (S) node to the destination (D). Since the activated UAV relays are always floating and flying in the air, its channel state information (CSI) as well as channel capacity is a time-variant parameter. Considering decode-and-forward (DF) relaying protocol in UAV relays, the cooperative relaying channel capacity is constrained by the relatively weaker one (i.e. in terms of signal-to-noise ratio (SNR) or signal-to-interference-plus-noise ratio (SINR)) between S-to-relay and relay-to-D links. The channel capacity can be optimized by adaptively optimizing the transmit power of S and/or UAV relay. Furthermore, a hybrid HD/FD mode is enabled in the proposed UAV relays for adaptively optimizing the channel utilization subject to the instantaneous CSI and/or remaining self-interference (SI) levels. Numerical results show that the channel capacity of the proposed UAV relay aided wireless networks can be maximized by adaptively responding to the influence of various real-time factors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.83-88
• /
• 2009

Selection relaying(SR) is usually based on signal-to-noise ratio(SNR) to decide whether or not to forward recovered symbols. However, instantaneous noise at relay is ignored, leading to the risk of erroneous retransmission induced by the relay that can be detrimental to the eventual detection of symbols at destination. To overcome this problem, we propose using new symbol error probability(SEP) related directly to reliability of received symbols instead of SNR. Simulation results show that the proposed SEP-based SR is considerably better than the conventional SNR-based SR under any relay position and threshold.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1360-1365
• /
• 2010

In this paper, we propose a distance relaying algorithm using a Discrete Fourier Transform (DFT)-based modified phasor estimation method to eliminate the adverse influence of exponentially decaying DC offsets. Most distance relays are based on estimating phasors of the voltage and current signals. A DFT is generally used to calculate the phasor of the fundamental frequency component in digital protective relays. However, the output of the DFT contains an error due to exponentially decaying DC offsets. For this reason, distance relays have a tendency to over-reach or under-reach in the presence of DC offset components in a fault current. Therefore, the decaying DC components should be taken into consideration when calculating the phasor of the fundamental frequency component of a relaying signal. The error due to DC offsets in a DFT is calculated and eliminated using the outputs of an even-sample-set DFT and an odd-sample-set DFT, so that the phasor of the fundamental component can be accurately estimated. The performance of the proposed algorithm is evaluated for a-phase to ground faults on a 345 kV, 50 km, simple overhead transmission line. The Electromagnetic Transient Program (EMTP) is used to generate fault signals. The evaluation results indicate that adopting the proposed algorithm in distance relays can effectively suppress the adverse influence of DC offsets.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1606-1626
• /
• 2012

This paper investigates the performance of an amplify-and-forward (AF) two-way relaying system with antenna correlation. The system consists of two multiple-antenna sources, which exchange information via the aid of a single-antenna relay. In particular, we derive the exact outage probability expression. Furthermore, we provide a simple, tight closed-form lower bound for the outage probability. Based on the lower bound, we obtain the closed-form asymptotic outage probability and the average symbol error rate expressions at high signal-to-noise ratio (SNR), which reveal the system's diversity order and coding gain with antenna correlation. To investigate the system's throughput performance with antenna correlation, we also derive a closed-form lower bound for the average sum-rate, which is quite tight from medium to high SNR regime. The analytical results readily enable us to obtain insight into the effect of antenna correlation on the system's performance. Extensive Monte Carlo simulations are conducted to verify the analytical results.