• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.167-178
• /
• 2003

The design on the Telemetry Ground System for launch of KSLV(Korea Space Launch Vehicle) in the korean Space center has been conducted in this study. For the optimized system design, first of all, the system deployment plan reflecting the topographic and geographic environments of the space center and launch vehicle characteristics has been developed. The RF link budget analysis for the maximum tracking range, requirement for receiving subsystem including antenna subsystem, requirement for data processing subsystem are also analyzed based on the On-Board Telemetry characteristics and launch vehicle parameters. Based on those analysis, telemetry ground system containing tracking/receiving subsystem, recording subsystem and data processing subsystem, timing subsystem, calibration subsystem and monitoring and control subsystem are designed. Futhermore, the analysis for the maximum permissible data latency and communication protocol between each telemetry station and control center are conducted and the entire system is designed so that the major telemetry parameters selected to the best quality are provided in real time to the control center(RCC, RSC) for the launch mission operation.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.45-52
• /
• 2016

In this paper, the method of interference analysis and its simulation have been suggested for the frequency sharing between aeronautical radio navigation systems and Link-16 platforms. In order to get the criteria for interoperability, the algorithm of interference analysis and protection ratio are derived to assure frequency sharing. Also the receiving power of wireless system has been illustrated with the help of radio propagation model of ITU-R Rec. P.1546 in VHF-UHF band. Finally the required receiving power or separation distance between DME/TACAN beacons and Link-16 ground station terminals has been considered based on system link budget in terms of evaluating interoperability as well as actual applications. As a result, if the suggested interference analysis and test set-up are applied to the field trial, it will lead to easy means to make a decision on interoperability over the existing incumbent systems.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.302-305
• /
• 2003

3GPP RLC protocol specification adopted an error control scheme based on selective repeat ARQ. In the 3GPP ARQ, distinctive windows are provided at transmitting and receiving stations so that those stations are prohibited to send or receive data PDU's out of window. An increase in window size enhances delay performance. Such an increase, however, raises the occupancy at re-ordering buffer, which results in a long re-ordering time. Aiming at suppressing the occupancy at re-ordering buffer, we propose partial go back N scheme in this paper In the partial go back N scheme, the receiving station regards all data PDU's between the first (lowest sequence numbered) error-detected PDU and last (highest sequence numbered) error-detected PDU. By the employment of the partial go back N scheme, the occupancy at the re-ordering buffer is apparently reduced, while the delay and throughput performance may be degraded due to the remaining properties of go back N. We thus consider peak occupancy of re-ordering buffer, mean sojourn time at re-ordering buffer, mean delay time, and maximum throughput as measures to evaluate tile proposed scheme and investigate such performance by using a simulation method. From numerical examples, we observe a trade-off among performance measures and conclude that the partial go back N scheme is able to effectively reduce the occupancy of re-ordering buffer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.472-486
• /
• 2000

This paper analysis the performance of joint receiving structure consisting of the decorrelating multiuser detection and beamfromenr-RAKE receive for DS-CDMA communication systems. In asynchronous transmission as the number of simultaneous users increase. the capacity of CDMA system becomes severly reduced due to the nonideal orthogonality between user-assigned PN sequences and improper power control. Accordingly, the CDMA receiving system becomes vulnerable to the multiple access interferences and the near-far problem under multipath fading channel environment. To withstand these undesired performance degradations, this paper proposes the new type of multiuser detection which has a form of the hybrid structure of concatenating beamformer-RAKE receiver and decorrelating multiuser detection. the beam former-RAKE receiver performs temporal and spatial diversity combining with alleviating fading effect and suppressing undesired interferences, and the multiuser detection plays a role of making the receiver robust to the near-far problem. Regarding the individual merit on the usage of either multiuser detection or beamformer-RAKE receiver, the hybrid one is expected to produce the enhanced performance in multipath fading CDMA channel. However major drawback of using decorrelating multiuser detection for practical deployment is arised from its computational complexity , which is exponentially increased as more number of users and transmitted symbols involve. To diminish the computational complexity, this paper exploits an efficient block Toeplitz inversion technique using matrix Levinson polynomial will be introduced. And this paper provided the mathematical analysis to show the efficiency of the proposed joint structure under the multipath propagation environment. And results of a series of exhaustive computer simulations are presented in order to demonstrate the overall performance of the proposed hybrid structure in multipath fading CDMA channel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.616-619
• /
• 2008

In this paper, we design and implement the authentication system for home network service and applied it to actual sensor nodes. We achieved authentication key, encryption and decryption applied RC5 encryption algorithm of SNEP. In addition, we used pair-wise key pre-distribution for prevention of authentication sniffing in wireless sensor network. The experiment environment consists of a base station receiving data and sensor nodes sending data. Each sensor nodes sends both the data and encrypted authentication key to the base station. As a simulation environment, we assumed some what-if scenarios of security menaces in home network service. And we slightly altered the TOS_Msg construction of TinyOS. The experiences had shown that the malfunction doesn't happen in communication among other groups. And we confirmed in tests that the system is secure when a sensor having malicious propose is added.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.119-125
• /
• 2008

In this paper, we proposed the modeling of UHF frequency environment in a random mountainous area with line of sight. A transmitting station is defined as wanted transmitter(Wr) and a receiving station is defined as victim receiver(Vr). These set up victim link. A interference transmitter(It) and wanted receiver(Wr) set up interference link. We compared measured data at random mountainous area with data of the result using spectrum engineering advanced monte calo analysis tool(SEAMCAT), interference simulation based on the monte-carlo method. The desired received signal strength(dRSS) of SEAMCAT had the calculated error of 70% from the measured received signal strength because there was a topographical effect. Therefore, the effect of diffraction interference was included to lessen the power of transmitter in the proposed simulation. The cause of received power error are cable loss and errors of a measuring instrument. The proposed simulation modeling in UHF frequency environment expect that is the useful study on interference analysis and reassignment of broadcasting frequency.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.127-136
• /
• 2017

In Korea, the "Act on Emergency Medical Care" was enacted in 1994, which was a trigger for first aid training. Currently, first aid training including AED for the general public is done, but the actual use of AED is not enough. The reason for this is that there may be a problem with non-uniform BLS training. The personal and social factors that hinder the intent for AED use were identified through previous studies and applied to BLS training improvement. As a result, 200 subjects (41.6%), who had no intention to use AED, among a total of 481 subjects, were reduced to 43 subjects (8.9%) after receiving the improved BLS training. As a detailed method to increase the intention of using AED, the need for AED location training was highest after the training. Based on this, it is important to convey accurate contents in AED training and the training for location awareness of AED should be done at the same time.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.159-166
• /
• 1999

In this paper, we examined noise figure and the 3rd order intercept point in sensitivity single tone desensitization, and response attenuation by intermodulation spurious of receiver and also analyzed them through simulation based on J-STD-0.18, which is the minimum specification of PCS mobile station. The result of simulation was as follows ; In sensitivity specification, the total noise figure was 5.99dB and the 3rd order intercept point was -33.979dB. Ins ingle tone desensitization and intermodulation spurious response attenuation specification, the total noise figure was 6.375dB and the 3rd order intercept point was -26.99dBm. When there is an interference tone, the nosie figure and the 3rd order intercept point have been increasedly 0.367dB respectively, compared wit that of no interference tone. Because the amount of increase in the 3rd order intercept point was highly raised more than that of noise figure, mixer, closely related to interference tone should be specified in high 3rd order intercept point. At a frequency spacing of 1.25MHz and 2.05MHz from center frequency in IF SAW filter, attenuation should be more than 45dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1251-1258
• /
• 2002

The weather FAX machine is the one of necessary of safety navigation for ship. which is the machine which make the weather image by the receiving radio signal which is modulated using FSK method and transmitted on air by coast station. after Coast station scan the weather image and broadcast the image with black dot to 1500Hz and white dot to 2300Hz using FSK modulation. This paper implement weather fax machine using only general IBM-PC by software. By using IBM-PC we can make some good functions like print, edit, save etc. The modulated signal from SSB go into RS232C port via photo coupler not to give damage to PC. by using Timer Interrupt and RS232C serial interrupt, we can measure signal frequency and remake weather image. This paper use only IBM-PC with general SSB receiver which is widely spread on the ship. so this is very economic and possible to implement mutifunctions.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.19-27
• /
• 2012

In railway tunnel environment, the reliability of a high-data-rate and real-time train-to-wayside communication should be maintained especially when high-speed train moves along the track. In China and Europe, the communication frequency around 900 MHz is widely used for railway applications. At this carrier frequency band, both of the solutions based on continuously laid leaky coaxial cable (LCX) and discretely installed base-station antennas (BSAs), are applied in tunnel radio coverage. Many available works have concentrated on the radio-wave propagation in tunnels by different kinds of prediction models. Most of them solve this problem as natural propagation in a relatively large hollow waveguide, by neglecting the transmitting/receiving (Tx/Rx) components. However, within such confined areas like railway tunnels especially loaded with train, the complex communication environment becomes an important factor that would affect the quality of the signal transmission. This paper will apply a full-wave numerical method to this case, for considering the BSA or LCX, train antennas and their interacted environments, such as the locomotive body, overhead line for power supply, locomotive pantograph, steel rails, ballastless track, tunnel walls, etc.. Involving finite-difference time-domain (FDTD) method and uni-axial anisotropic perfectly matched layer (UPML) technique, the entire wireless RF downlinks of BSA and LCX to tunnel space to train antenna are precisely modeled (so-called integrative modeling technique, IMT). When exciting the BSA and LCX separately, the field distributions of some cross-sections in a rectangular tunnel are presented. It can be found that the influence of the locomotive body and other tunnel environments is very significant. The field coverage on the locomotive roof plane where the train antennas mounted, seems more homogenous when the side-laying position of the BSA or LCX is much higher. Also, much smoother field coverage solution is achieved by choosing LCX for its characteristic of more homogenous electromagnetic wave radiation.