• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.276-281
• /
• 2005

This paper presents a low voltage operating IF QPSK receiver block which is consisted of programmable gain amplifier (PGA) and analog to digital converter. This PGA has 6 bit control and 250MHz bandwidth, $0{\sim}20\;dB$ gain range. Using the proposed PGA architecture (low distortion gain control switch block), we can process the continuous fully differential $0.2{\sim}2.5Vpp$ input/output range and 44MHz carrier with 2 MHz bandwidth signal at 1.8V supply voltage. Using the sub-sampling technique (input freq. is $44{\sim}46MHz$, sampling freq. is 25MHz), we can process the IF QPSK signal ($44{\sim}46MHz$) which is the output of the 6 bit PGA. We can get the SNDR 35dB, which is the result of PGA and ADC at full gain mode. We fabricated the PGA and ADC and the digital signal processing block of the IF QPSK with the 0.18um CMOS MIM process 1.8V Supply.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.11
• /
• pp.611-616
• /
• 2004

In this paper, we introduce a very fast and efficient fractal coding scheme by using the spatial prediction on ultra-small atomic range blocks. This new approach drastically speeds up the encoding while improving the fidelity and the compression ratio. The affine transformation coefficients between adjacent range blocks induced by this method often have good correlations thereby the compression ratios can further be improved. The proposed method leads to improved rate-distortion performance compared to previously reported pure fractals, and it is faster than other state-of-the-art fractal coding methods.

• Clinics in Orthopedic Surgery
• /
• v.10 no.4
• /
• pp.407-412
• /
• 2018

Background: We conducted this study to determine the optimal length of patellar and tibial bone blocks for the modified transtibial (TT) technique in anterior cruciate ligament (ACL) reconstruction using the bone-patellar tendon-bone (BPTB) graft. Methods: The current single-center, retrospective study was conducted in a total of 64 patients with an ACL tear who underwent surgery at our medical institution between March 2015 and February 2016. After harvesting the BPTB graft, we measured its length and that of the patellar tendon, patellar bone block, and tibial bone block using the arthroscopic ruler and double-checked measurements using a length gauge. Outcome measures included the length of tibial and femoral tunnels, inter-tunnel distance, length of the BPTB graft, patellar tendon, patellar bone block, and tibial bone block and graft-tunnel length mismatch. The total length of tunnels was defined as the sum of the length of the tibial tunnel, inter-tunnel distance and length of the femoral tunnel. Furthermore, the optimal length of the bone block was calculated as (the total length of tunnels - the length of the patellar tendon) / 2. We analyzed correlations of outcome measures with the height and body mass index of the patients. Results: There were 44 males (68.7%) and 20 females (31.3%) with a mean age of 31.8 years (range, 17 to 65 years). ACL reconstruction was performed on the left knee in 34 patients (53%) and on the right knee in 30 patients (47%). The optimal length of bone block was 21.7 mm (range, 19.5 to 23.5 mm). When the length of femoral tunnel was assumed as 25 mm and 30 mm, the optimal length of bone block was calculated as 19.6 mm (range, 17 to 21.5 mm) and 22.1 mm (range, 19.5 to 24 mm), respectively. On linear regression analysis, patients' height had a significant correlation with the length of tibial tunnel (p = 0.003), inter-tunnel distance (p = 0.014), and length of patellar tendon (p < 0.001). Conclusions: Our results indicate that it would be mandatory to determine the optimal length of tibial tunnel in the modified TT technique for ACL reconstruction using the BPTB graft. Further large-scale, multi-center studies are warranted to establish our results.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.1-10
• /
• 2005

In this Paper, we propose a new block matching a1gorithm that extracts motion vectors from consecutive range data. The proposed method defines a matching metric that integrates intensity, hue, and range. Our algorithm begins matching with a small matching template. If the matching degree is not good enough, we slightly expand the size of a matching template and then repeat the matching process until our matching criterion is satisfied or the predetermined maximum size has been reached. As the iteration proceeds, we adaptively adjust weights of the matching metric by considering the importance of each feature. In the experiments, we show that our block matching approach can work as a promising solution by comparing the proposed method with previously known method in terms of performance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.38-48
• /
• 2011

Block based LCD backlight nonideality and crosstalk compensation methodologies are proposed based on the analysis of backlight profiles and image pixel homogeneity. Large computation complexity required in the conventional compensations is minimized without the degradation of image qualities by optimizing image block size, image area inside the block to be excluded from the compensation computation and the required backlight range to be computed. The optimization results of computation complexity as well as image qualities are verified for the proposed compensation by real image data simulations.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.181-184
• /
• 2001

This study is performed to examine the development of the plantable concrete using excellent soil compound, crushed stone, stone dust and superplasticizer. The following conclusions are drawn ; The void ratio is in the range of $25.10{\sim}31.40%$ and the compressive strength is in the range of $69{\sim}113kgf/cm^{2}$ at the curing age 28days, respectively. The plant length was showed higher block by 10% stone dust than 20%.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.913-914
• /
• 2008

This paper presents a method of adaptive image enhancement with dynamic range compression and contrast enhancement. The dynamic range compression is to adaptively enhance the dark area using illumination component of DCT compression block. The contrast enhancement is to modify the image contrast using retinex theory that uses the HVS properties. The block artifacts and other noises, caused by processing in the compression domain, were removed by after processing.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.898-901
• /
• 2000

A new 2-D block Kalman filtering method which uses a nonlinear function is presented to generate a more accurate filtered estimate of a range image that has been corrupted by additive noise. Novel 2-D block Kalman filtering method is constructed of the conventional method and nonlinear function which utilizes to control estimation error. We show that novel 2-D Kalman filtering method using a nonlinear function is effective at reducing the additive noise, not distorting shape edges.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.810-813
• /
• 2004

In this paper, a background initialization for video surveillance proposed. The proposed algorithm is that the background images are sampled n frames during ${\Delta}t$ All Sampling frames are divided by $M{\times}N$ size block every frame. Average values of pixels for same location block of the sampling frames during ${\Delta}t$t are taken. then the maximum intensity $\alpha$ and the minimun intensity $\beta$ is obtained, respecticely. The intial by $M{\times}N$ size block, then average intensity $\eta$ of pixels for the block is obtained. If the average intensity $\eta$ is out of the initial range of the background image, it is decided the moving object image, and if the average intensity $\eta$ is included in the initial range of the background image. it is decided the background image. To examine the propriety of the proposed algorithm in this paper, the accuracy and robustness evaluation results for human and car in the indoor and outdoor enviroment. the error rate of the proposed method is less than the existing methods and the extraction rate of the proposed method is better than the existing methods.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.523-528
• /
• 2005

Diblock copolymers with different poly($\varepsilon$-caprolactone) (PCL) block lengths were synthesized by ringopening polymerization of $\varepsilon$-caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG-OH, MW 2000) as initiator. The self-aggregation behaviors of the diblock copolymer nanoparticle, prepared by the diafiltration method, were investigated by using $^1H$ NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG-PCL block copolymers formed the nano-sized self-aggregate in an aqueous environment by intrsa- and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations (cac) of the block copolymer self-aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The hydrodynamic diameters of the block copolymer nanoparticles, measured by DLS, were in the range of 65-270 nm. Furthermore, the size of the nanoparticles was scarcely affected by the concentration of the block copolymers in the range of 0.125-5 mg/mL owing to the negligible interparticular aggregation between the self-aggregated nanoparticles. Considered with the fairly low cac and nanoparticle stability, the PEG-PCL nanoparticles can be considered a potential candidate for biomedical applications such as drug carrier or imaging agent.