• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.3
• /
• pp.263-279
• /
• 1989

In part-1 of this paper, the error rate equations of digitally modulated signals transmitted though the Gaussian/Impulsive noise channel have been derived. Using the derived equations for the error probabilities of ASK, QAM, CPSK, DPSK, FSK and MSK signals, the error rate performances of digital modulation systems have been evaluated and represented in the figures as the functions of carrier-to-noise power ratio(CNR), impulsive index, and the ration of Gaussian noise power component to impulsive noise power component. The results are shown in graphs to known how much impulsive noise effects on digital signals than Gaussian noise.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.330-343
• /
• 2011

In this paper, we propose two schemes to reduce the complexity of fixed-complexity sphere decoder (FSD) algorithm in the ordering and tree-search stages, respectively, while achieving quasi-ML performance. In the ordering stage, we propose a QR-decomposition-based FSD signal ordering based on the zero-forcing criterion (FSD-ZF-SQRD) that requires only a few number of additional complex flops compared to the unsorted QRD. Also, the proposed ordering algorithm is extended using the minimum mean square error (MMSE) criterion to achieve better performance. In the tree-search stage, we introduce a threshold-based complexity reduction approach for the FSD depending on the reliability of the signal with the largest noise amplification. Numerical results show that in $8{\times}8$ MIMO system, the proposed FSD-ZF-SQRD and FSD-MMSE-SQRD only require 19.5% and 26.3% of the computational efforts required by Hassibi’s scheme, respectively. Moreover, a third threshold vector is outlined which can be used for high order modulation schemes. In $4{\times}4$ MIMO system using 16-QAM and 64-QAM, simulation results show that when the proposed threshold-based approach is employed, FSD requires only 62.86% and 53.67% of its full complexity, respectively.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.134-139
• /
• 2018

A novel approach for frequency-tripling vector signal generation via balanced detection without precoding and optical filter is proposed. The scheme is mainly utilizing an integrated dual-polarization quadrature phase shift keying (DPQPSK) modulator. In the DPQPSK modulator, one QPSK modulator is driven by an RF signal to generate high-order optical sidebands, while the other QPSK modulator is modulated by I/Q data streams to produce baseband vector signal as an optical carrier. After that, a frequency-tripling 16-quadrature-amplitude-modulation (16QAM) vector millimeter-wave (mm-wave) signal can be obtained by balanced detection. The proposed scheme can reduce the complexity of transmitter digital signal processing. The results show that, a 4 Gbaud baseband 16QAM vector signal can be generated at 30 GHz by frequency-tripling. After 10 km single-mode fiber (SMF) transmission, the constellation and eye diagrams of the generated vector signal perform well and a bit-error-rate (BER) below than 1e-3 can be achieved.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.4
• /
• pp.173-179
• /
• 2002

This paper describes an equalizer using the DFE (Decision Feedback Equalizer) structure, CMA (Constant Modulus Algorithm) and LMS (Least Mean Square) algorithms. The DFE structure has better channel adaptive performance and lower BER than the transversal structure. The proposed equalizer can be used for 16/64 QAM modems. We employ high speed multipliers, square logics and many CSAs (Carry Save Adder) for high speed operations. We have developed floating-point models and fixed-point models using the COSSAP$\^$TM/ CAD tool and developed VHDL filter. The proposed equalizer shows low BER in multipath fading channel. We have performed models. From the simulation results, we employ a 12 tap feedback filter and a 8 tap feedforward logic synthesis using the SYNOPSYS$\^$TM/ CAD tool and the SAMSUNG 0.5$\mu\textrm{m}$ standard cell library (STD80) and verified function and timing simulations. The total number of gates is about 130,000.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2007

SDR technology is a fundamental wireless access technology that combines and accommodates multiple wireless communication standards in one transceiver system through just modifying software using modular communication platforms without any hardware modifications for RF and IF signal processing on the basis of high performance DSP devices. Various communication systems that are designed under diverse and complex network environments require the communication platforms on the basis of SDR supporting reorganization to guarantee simple and fast communication interfaces among the respective wireless networks. This paper introduces a main idea on the implementation of platform on the basis of SDR and a communication platform is designed for experiments that is composed of a DSP board with TMS320C6713 CPU, a FPGA board processing IF signals, and a module with RF transceiver processing wireless LAN frequency bandwidth. Various modulation schemes(BPSK, QPSK, and 16QAM) used in communication systems are applied and tested on the designed platform and the test results shows that it is possible to design a reconfigurable communication terminal platform.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.21-25
• /
• 2013

The dual-stream based stereoscopic 3D HDTV broadcasting service was launched recently. Although the dual-stream based HDTV service has been successfully provided, the 3D HDTV broadcasting system requires more bandwidth efficient transmission schemes because it should convey both left and right HD resolution images simultaneously in the finite 6MHz bandwidth. In this paper, we consider more advanced ATSC transmission schemes that use higher modulation such as 16-QAM and concatenated RS code and block LDPC codes. Compared with conventional ATSC system and the modified ATSC system in [2], the proposed system has about 2.97dB and 1.12dB SNR gain at the payload data rate of 19.44Mbps compared with the existing ATSC system and the modified ATSC system [2]. Also, the proposed scheme requires only 1.05dB power increase for the 3D HDTV service, which is reasonable SNR increase value and applicable to the advanced 3D high definition broadcasting realization in limited 6MHz bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.500-505
• /
• 2009

In this paper, We present a low complexity candidate list generation scheme in iterative MIMO receiver. Since QAM modulation can be decomposed into HP symbols and LP symbol and HP symbol is robust in error capability, we generate HP symbol list with simple ZF detector output and its corresponding neighbor HP symbols, Then, based on HP symbol list, the LP symbol list is generated by using the sphere decoder. From the second iteration, since apriori value from channel decoder is available, the candidate list is updated based on demodulated apriori value. Through the simulation, we observe that at the first iteration, the BER performance is worse than LSD. However, as the number of iteration is increased, the proposed scheme has almost same performance as LSD. Moreover, the proposed one has reduced candidate list generation time and lower number of candidate list compared with LSD.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1043-1050
• /
• 2004

In this paper, Phase noise is analyzed and a novel approach of the nonlinear approximation including second order term of phase noise is presented to analyze and quantize system performance. As results, in QPSK-OFDM system, when PLL loop bandwidth is 5.0 Hz, 1.0 kHB, 0.5 kHz respectively, there are about 0.6 dB, 1.0 dB, 1.7 dB SNR penalties at BER=10$\^$-4/ compared with system without phase noise in AWGN channel. In 16QAM modulation, there are about 1.9 dB, 3.2 dB, 6.7 dB SNR penalties at BER=10$\^$-4/ respectively. At QPSK-OFDM system, comparing the previous linear approximation method with our proposed nonlinear approximation method, there is similar BER performance at phase noise variance lower than 0.02, but certain difference occurs as variance increases more than 0.02. Furthermore, analytical BER results closely match with simulation results in the OFDM system employing QPSK and 16qAM modulation. And, BER performance of QPSK-OFDM system is considerably degraded because of the BER error floor if the phase noise variance becomes larger than 0.03.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.84-89
• /
• 2014

Worldwide Interoperability for Microwave Access (WiMAX) is an efficient technology for 20th century communication system. The technology provides broadband speed without the need for cables and is based on the IEEE 802.16 standard(also called Wireless MAN). Mobile WiMAX is defined as IEEE802.16e which is advanced and efficient technology for mobile telecommunication rather than GSM, CDMA technology. In this work link budget calculation for WiMAX have been done. Cell range have been calculated over digital modulations and they are BPSK, QPSK and QAM. Here different types of models like Cost 231 model have been used for different types of areas like open, rural and urban areas and Erceg-Greenstein model for sub-urban areas. Effect of various parameters like frequency, base station antenna height, transmission power and SNR over cell range have been studied. Analysis have done for both uplink and downlink.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.99-105
• /
• 2018

This paper proposes multiple access method for smart doorlock system using VLC(Visible Light Communication) with color grid modulation method. The proposed method is to connect multiple visible light signals using color grid modulation method in order to recognize and authenticate multiple users accessing doorlock. In order to enable visible light multiple access with existing infrastructure, the symbol energy interval of signal should be maximized. Thus, performance of system in VLC channel is measured by modulating symbols based on the proposed method. We confirm the actual channel test results of the modulated signal to implement doorlock system that recognizes the number of multiple access users.