• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.34-39
• /
• 2009

Four-digit PIN(Personal Identification Number) is a well-known user authentication method used for many applications including ATMs and mobile phones. However, it is vulnerable to shoulder surfing attacks(SSAs). In this paper, we present new PIN entry methods which are secure against SSA and easy to use. We compare the usability and security of these methods with those of the existing methods.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.3
• /
• pp.105-109
• /
• 2017

In this paper is proposed wide band reconfiguration antenna by using PIN diode. The proposed antenna consisted of elliptical dipole and exponential taper balun. The proposed new matching method was exponential tapered balun in this paper. The research paper comprised of two PIN diode and Elliptical dipole. This paper used CPW to CPS feed. We obtained a good band width characteristics result by simulating. This antenna is designed to apply ISM and WiFi band.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.3-7
• /
• 2009

A cylindrical pin fin with inside fluid is optimized based on fixed fin volume by using the one dimensional analytic method. Heat loss from the fin and the pin fin radius for fixed fin volume is presented as a function of the fin length. Temperature variation of the fin with the variation of ambient and inside fluid convection characteristic numbers and fin base thickness is listed. The maximum heat loss at the practical fin length and corresponding optimum fin length and radius are presented as a function of fin base thickness, inside convection characteristic number, fin volume and ambient convection characteristic number. One of the results shows that the optimum pin fin shape becomes relatively fatter as the fin volume increases.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.574-578
• /
• 2003

The objective of this paper is to decide optimal location of pin-hole to minimize stress concenstation around hole in rotating disc. The focus of this investigation is to evaluate the effect of pin-hole for stress distribution around hole using optimum design technic and finite element analysis. Design variables are radial and angular location of pin-hole from center of hole, objective function is maximum stress around hole in rotating disc. We use first order method of optimization technic.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.21-25
• /
• 2011

A comparison of temperature distributions along the fin length coordinate between two different fin tip boundary conditions for a circular pin fin is made by using the one-dimensional analytic method. One tip boundary condition is the actual fin tip boundary condition and fin tip temperature is arbitrarily given for another fin tip boundary condition. The value of the fin base temperature is depend on the fin base thickness and fin radius. One of the results shows that the temperature distribution along the fin length coordinate for the actual fin tip boundary condition and that for the arbitrarily given fin tip temperature are the same if the arbitrarily given fin tip temperature and the fin tip temperature for the actual fin tip boundary condition are the same.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1339-1345
• /
• 2017

In the framework of the EU funded project NURESAFE, the subchannel code CTF and the neutronics code DYN3D were integrated and coupled on the NURESIM platform. The developments achieved during this 3-year project include assembly-level and pin-by-pin multiphysics thermal hydraulics/neutron kinetics coupling. In order to test this coupling, a PWR rod ejection transient was simulated on a MOX/UOX minicore. The transient is simulated using two different models of the minicore. In the first simulation, both codes model the core with an assembly-wise resolution. In the second simulation, a pin-by-pin fuel-centered model is used in CTF for the central assembly, and a pin power reconstruction method is applied in DYN3D. The analysis shows the influence of the different models on global parameters, such as the power and the average fuel temperature, but also on local parameters such as the maximum fuel temperature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.331-332
• /
• 2022

The previously used locking device is a PIN method and has a problem in that the password is exposed by malicious users. In other words, if attackers looks at lock passwords from the side, correct passwords are known. In this paper, we aim to solve these security problems in lock devices resistant to shoulder surfing attacks. The proposed encryption approach is designed so that attackers cannot know lock passwords. To this end, we use a hidden password method instead of directly entering a PIN-type password to prevent the correct password from being exposed to an attacker even if someone steals the lock password.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.135-138
• /
• 1991

A planar type PIN photodiode has been fabricated and discussed. We used OMVPE systems to grow the structure of u-InP/u-InP/n-InP. P-n junction was formed by Zn-diffusion method at 50$0^{\circ}C$, for 5 minitues. The device characteristics at 5V were as follows: Dark currents were distributed around 1nA. Capacitance was 1.6pF and responsivity was above 0.85 mA/mW for 1.3${\mu}{\textrm}{m}$ wavelength. Measured cut-off frequency(-3dB) at -5V was 1.1㎓.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.71-75
• /
• 2007

A cylindrical pin fin with variable diameter is analyzed by using the one dimensional analytical method. Heat loss and fin efficiency are presented as a function of the fin diameter, length and convection characteristic numbers ratio. The relationship between the fin diameter and convection characteristic number over the fin for the same amount of heat loss is shown. One of the results indicates the fin efficiency increases as the fin diameter increases while that decreases as the fin length increases.

• Journal of Korea Multimedia Society
• /
• v.25 no.7
• /
• pp.932-944
• /
• 2022

Smartphones, are currently equipped with high-performance hardware to process large amounts of data and provide most of the functions provided by desktop PCs. In addition, the smartphones enable quick user authentication through biometric information collected from embedded sensors. However, the biometric authentication method is sometimes rejected due to social and cultural environment, security vulnerabilities, and misrecognition rate. Thus, conventional authentication methods such as PIN and pattern authentication are still mainly used. Consider the latest foldable and bendable smartphones. These devices may be vulnerable to social engineering attacks as they use conventional authentication methods without considering their form factors. In this study, therefore, we propose an authentication method using partial elements of PIN and pattern authentication as a way to increase the security of the conventional authentication methods and consider the recent form factors. According to the performance evaluation results, our method provides improved safety compared to the conventional methods.