• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1138-1143
• /
• 1997

This study was carried out to investigate the meat color and water holding capacity (WHC) characteristics of PSE, RSE (reddish-pink, soft, exudative), RFN (reddish-pink, firm, non-exudative) and DFD pork quality, also the relationship of lightness $(L^*-value)$ and WHC to drip loss were examined. When WHC in M. longissimus dorsi muscle by filter paper press method was measured at 45 min postmortem (45 min p.m.), DFD meat indicated the highest WHC, RSE and RFN pork were significantly different (p<0.05). WHC measured at 24 hr postmortem were not significantly different between RSE and RFN pork (p.0.05). Drip loss (%) were significantly different among the four quality group, but cooking loss (%) of PSE, RSE and RFN pork were not significantly different, except DFD. PSE pork indicated the lowest salt soluble protein solubility. The correlation between drip loss and $L^*-value$ was r=0.61, drip loss increased with increasing $L^*-value$. Also drip loss were moderately correlated with $WHC_{4.5\;min\;p.m.}$ (r=-0.47), with $WHC_{24\;hr\;p.m.}$ (r=-0.52). When drip loss was predictable from $L^*-value$ and WHC, $L^*-value$ was superior to evaluation by WHC.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.811-818
• /
• 2017

Environmental tests are used to verify a equipment that can withstand the rigors of harsh environments. In case of military products for export, the tests have to be based on the climatic data of the world. However, if the climatic data of the world is used for domestic military products, it may cause an increase in manufacture price. There is currently no climatic data that can be used as criteria for the tests in the Korean peninsula and coastal seas. Therefore, this paper suggests a water temperature and a salinity guidelines of salt fog tests for military products used in the area. As a result, we present water temperature and salinity information that is extreme and FOO of the Korean coastal seas.

• Korean Journal of Remote Sensing
• /
• v.12 no.2
• /
• pp.169-198
• /
• 1996

The objectives of this investigation are : 1. To analyze spectral signature and the associated vegetation index for geometric illumination conditions inf1uenced by low solar elevation and high slope orientations in mountainous forest. 2. To assess the accuracy of the spectral angle mapper classification for the a winter land cover in comparison with the maximum likelihood classification. 3. To produce the image of water quality and water properties that could be used to estimate the water pollution sources and the tide-included by turbid water in estuarine and coastal areas. These objectives are to characterize environmental and ecological monitoring applications of the Nak-Dong River Basin by using Fuyo-1 OPS VNIR data acquired on December 26, 1992. The results of this paper are as follows : 1. The spectral digital numbers and vegetation indexes (NDVI and TVI) of mountainous forest are higher on the slope facing the sun than on the slope hidden the sun under low sun elevation condition. 2. The spectral angle mapper algorithm produces a more accurate land cover classification of areas with steep slope, various aspects and low solar elevation than the maximum likelihood classifier. 3. The maximum likelihood classification images can be used for identifying the location and movement of both freshwater and salt water, regardless of geometric illumination conditions. 4. The color-coded density sliced image of selected water bodies by using the near-infrared band 3 can provide distribution of the water quality of the Lower Nak-Dong River. 5. The color-coded normalized difference vegetation index image of the selected mountain forest is suitable to classify winter vegetation cover types, i.e., forest canopy densities for slope orientations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.82-89
• /
• 2024

Black ice is very difficult to recognize and reduces the friction of the road surface, causing automobile accidents. Since black ice is difficult to detect, there is a need for a system that identifies black ice in real time and warns the driver. Various studies have been conducted to prevent black ice on road surfaces, but there is a lack of research on systems that identify black ice in real time and warn drivers. In this paper, an real-time image-based analysis system was developed to identify the condition of asphalt road surface, which is widely used in Korea. For this purpose, a dataset was built for each asphalt road surface image, and then the road surface condition was identified as dry, wet, black ice, and snow using deep learning. In addition, temperature and humidity data measured on the actual road surface were used to finalize the road surface condition. When the road surface was determined to be black ice, the salt spray equipment installed on the road was automatically activated. The surface condition recognition system for the asphalt concrete pavement and black ice automatic prevention system developed in this study are expected to ensure safe driving and reduce the incidence of traffic accidents.

• Journal of Life Science
• /
• v.28 no.3
• /
• pp.376-387
• /
• 2018

Among a variety of environmental stresses heat, cold, chilling, high salt, drought, and so on exposed to plants, drought stress has been reported as a crucial factor to adversely affect the growth and productivity of plants. Therefore, to understand the mechanism for the drought stress signal transduction pathway in plants is more helpful to develop useful crops that display the enhanced tolerance against drought stress, and to expand crop growing areas. The signal transduction pathway for the drought stress in plants is largely categorized into two types; ABA-dependent pathway and ABA-independent pathway. It has been reported that two transcription factors, AREB/ABF and DREB2, play predominant roles in ABA-dependent and ABA-independent pathways, respectively. In addition to transcriptional regulation mediated by AREB/ABF and DREB2 transcription factors, post-translational modification (such as phosphorylation and ubiquitination) and epigenetic control are importantly involved in the signal transduction for drought stress. In this paper, we review current understanding of signal transduction pathway on drought stress in plants, especially focusing on the biological roles of a variety of signaling components related to drought stress response. Further understanding the mechanism of drought resistance in plants through this review will be useful to establish theoretical basis for developing drought tolerant crops in the future.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.3-14
• /
• 2020

Titanium sponge is industrially produced by the Kroll process. In order to understand the importance of the emerging smelting and recycling process, it is necessary to review the conventional production process of titanium. Therefore this paper provides a general overview of the conventional titanium manufacturing system mainly by the Kroll process. The Kroll process can be divided into four sub-processes as follows: (1) Chlorination of raw TiO₂ with coke, by the fluidized bed chlorination or molten salt chlorination (2) Magnesium reduction of TiCl₄ and vacuum distillation of MgCl₂ and Mg by reverse U-type or I-type with reduction-distillation integrated retorts (3) Electrolysis process of MgCl₂ by monopolar cells or multipolar cells to electrolyze into chlorine gas and Mg. (4) Crushing and melting process in which sponge titanium is crushed and then melted in a vacuum arc furnace or an electron beam furnace Although the apparatus and procedures have improved over the past 80 years, the Kroll process is the costly and time-consuming batch operation for the reduction of TiCl₄ and the separation of MgCl₂.

• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.6-19
• /
• 2021

Subsurface physical properties can be obtained and imaged by seismic exploration, and various algorithms have been developed for this purpose. In this regard, root mean square error (RMSE) has been widely used to quantitatively evaluate the accuracy of the developed algorithms. Although RMSE has the advantage of being numerically simple, it has limitations in assessing structural similarity. To supplement this, full-reference image quality assessment (FR-IQA) techniques, which reflect the human visual system, are being investigated. Therefore, we selected six FR-IQA techniques that could evaluate the obtained physical properties. In this paper, we used the full-waveform inversion, because the algorithm can provide the physical properties. The inversion results were applied to the six selected FR-IQA techniques using three benchmark models. Using salt models, it was confirmed that the inversion results were not satisfactory in some aspects, but the value of RMSE decreased. On the other hand, some FR-IQA techniques could definitely improve the evaluation.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.15-28
• /
• 2013

This paper was made on the basis of geotourism to explain morphological characteristics of Patagonia and Atacama region in the Andes through 10-day fieldwork. The Patagonian landscape was focused on the Torres del Paine National Park, Chile and the Los Glacier National Park, Argentina; on the other hand, the Atacama morphological landscape was investigated around the San Pedro de Atacama. Many geomorphological features such as uplift, semiarid and glacier landscapes can be found in Patagonia, so it is strongly recommended to have an opportunity to enjoy these landforms by geotourism. Massive intrusive rock bodies of granite can be shown in those two National Parks declared a Biosphere Reserve by UNESCO. And, the Atacama Desert located on the forearc depression in the Andes, Chile has also many geomorphological destinations of arid and volcanic landforms; badland, pediplain, pediment, salt lake and geyser. Especially, huge pediplain is one of the greatest view points in the Atacama Desert. Patagonia and Atacama are the best geographical tourism sites to know diverse tectonic landforms made by the conflict between South American and Pacific plates.

• Membrane Journal
• /
• v.34 no.4
• /
• pp.205-215
• /
• 2024

The purpose of this paper was to preparation of organic solvent reverse osmosis (OSRO) membrane using a polyketone (PK) support. The PK support was prepared by non-solvent induced phase separation (NIPS) method, and a polyamide layer was interfacially polymerized on the PK support to fabricate OSRO membrane in the form of thin-film composite (TFC). After that, the surface and cross-sectional morphology of the OSRO membrane were analyzed, and the surface chemical structure of the membrane was analyzed. The water permeance and salt rejection of the OSRO membrane were about 1.28 LMH/bar and 99.0% respectively. The polyamide layer of the OSRO membrane was very stable during 1 day of organic solvent immersion, and the single organic solvent permeance trend was consistent with the organic solvent nanofiltration (OSN) membrane permeance model. The MWCO of the OSRO membrane is 240 g/mol in MeOH. The permeance and separation factor of the OSRO membrane for MeOH-toluene mixture were 200% and 60% higher than those of the commercial OSN membranes respectively.