• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.77-85
• /
• 1999

By assuming a linearly graded depletion edge approximation in the intrinsic MOS region and by taking into account the mobility variation dependent on both lateral and vertical fields, a physics-based analytical model for a short-channel(n-channel) MOSFET is suggested. Derived expressions for the threshold voltage and the drain current of typical MOSFET is structures could be used in a unified manner for all operating range. The threshold voltage was calculated by changing following variables : channel length, drain-source voltage, source-substrate voltage, p-substrate doping level, and oxide thickness. It is shown that the threshold voltage decreases almost exponentially as the channel length decreases. In addition, the short-channel threshold voltage roll-off, the channel length modulation and the electron mobility degradation can be derived within a satisfactory accuracy.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1765-1768
• /
• 2005

Binary-search 알고리즘을 이용한 새로운 6-bit 300MS/s ADC 를 제안 하였다. 본 연구에서 제안된 ADC 는 저전력, 고속동작, 저해상도의 응용분야에 적합하도록 설계 되었다. 11 개의 rail-to-rail 비교기와 기준전압 발생기, 그리고 기준전압 제어회로로 구성 되었으며, 이는 기존의 구조와는 다른 전혀 새로운 형태로 제안된 것이다. 전력소모를 줄이기 위해 비교기 공유기술을 사용하였다. 또한 ADC 의 sub-block 인 rail-to-rail 비교기는 인버터 logic threshold 전압 값을 이용한 새로운 형태의 비교기를 제안하였다. 비교기는 인버터와 n-type preamp, p-type preamp 그리고 각각에 연결되는 latch 로 구성되었다. 기존의 rail-to-rail comparator 에 비해 입력 범위 전체 영역에서 일정한 gm 값을 얻을 수 있다. 실험결과 2.5V 공급전압에서, 17mW 의 전력 소모를 보이며, 최대 304MS/s 의 데이터 변환율을 가진다. INL 과 DNL 은 입력신호가 2.38Mhz 의 주파수를 가지는 삼각파일 때, 각각 ${\pm}0.54LSB$, ${\pm}1LSB$ 보다 작다. TSMC 0.25u 공정을 이용하였다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1355-1359
• /
• 2014

In the proposed work a 2D analytical modeling of single halo Triple material Surrounding Gate (SH-TMSG) MOSFET is developed. The Surface potential and Electric Field has been derived using parabolic approximation method and the simulation results are analyzed. The essential substantive is provided which elicits the deterioration of short channel effects and the results of the analytical model are delineated and compared with MEDICI simulation results and it is well corroborated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.952-964
• /
• 1992

The interaction of natural convection and radiation heat transfer in a two dimensional square enclosure containing absorbing, emitting and linear anisotropically scattering gray medium is numerically analyzed. P-1 and P-3 approximation is introduced to calculate radiation heat transfer. The effects of scattering albedo, wall emissivity, scattering anisotropy, and optical thickness on the characteristics of the flow and temperature field and heat transfer are investigated. Temperature and velocity profiles depend a great deal on the scattering albedo, and the importance of this effect increases with decrease in albelo. Planck number is another important parameter in radiation heat transfer. The increase in scattering albedo increases convection heat transfer and decreases radiation heat transfer at hot wall. However, the increase in scattering albedo decreases both convection and radiation heat transfer at cold wall. The increase in optical thickness decreases radiation heat transfer. The scattering anisotropy has important effects on the radiation heat transfer only. The highly forward scattering leads to an increase of radiation heat transfer whereas the highly backward scattering leads to an decrease of radiation heat transfer. The effect of scattering anisotropy decreases when reducing the wall emissivity.

• Communications for Statistical Applications and Methods
• /
• v.19 no.4
• /
• pp.537-546
• /
• 2012

In this paper, for analyzing binary data, Poisson regression with offset and logistic regression are compared with respect to the power via simulations. Poisson distribution can be used as an approximation of binomial distribution when n is large and p is small; however, we investigate if the same conditions can be held for the power of significant tests between logistic regression and offset poisson regression. The result is that when offset size is large for rare events offset poisson regression has a similar power to logistic regression, but it has an acceptable power even with a moderate prevalence rate. However, with a small offset size (< 10), offset poisson regression should be used with caution for rare events or common events. These results would be good guidelines for users who want to use offset poisson regression models for binary data.

• Journal of applied mathematics & informatics
• /
• v.26 no.3_4
• /
• pp.689-706
• /
• 2008

In this paper, a fifth order numerical method is presented for solving singularly perturbed two point boundary value problems with a boundary layer at one end point. The two point boundary value problem is transformed into general first order ordinary differential equation system. A discrete approximation of a fifth order compact difference scheme is presented for the first order system. An asymptotically equivalent first order equation of the original singularly perturbed two point boundary value problem is obtained from the theory of singular perturbations. It is used in the fifth order compact difference scheme to get a two term recurrence relation and is solved. Several linear and non-linear singular perturbation problems have been solved and the numerical results are presented to support the theory. It is observed that the present method approximates the exact solution very well.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.221-226
• /
• 2008

A new two dimensional (2-D) analytical model for the Threshold Voltage on dual material surrounding gate (DMSG) MOSFETs is presented in this paper. The parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions. The simple and accurate analytical expression for the threshold voltage and sub-threshold swing is derived. It is seen that short channel effects (SCEs) in this structure is suppressed because of the perceivable step in the surface potential which screens the drain potential. We demonstrate that the proposed model exhibits significantly reduced SCEs, thus make it a more reliable device configuration for high speed wireless communication than the conventional single material surrounding gate (SMSG) MOSFETs.

• Journal of Korean Society for Quality Management
• /
• v.21 no.1
• /
• pp.171-180
• /
• 1993

Variables, x and y are said to have a linear relation if $y={\beta}_0+{\beta}_1\;x$, and ${\beta}_0$ and ${\beta}_1$ are constants. The relationship is called a structural relationship if x has positive variance (i.e., x is not fixed) and only error-prone measurements of x and y can be obtained. This paper derives (to order $n^{+1/2}$) an approximate distribution of the Studentized test statistic for testing hypotheses about the slope parameter, ${\beta}_1$ in a simple linear structural model. A simulation study suggests our approximate distribution is more accurate approximation to the exact distributions of the Studentized statistic than is the limiting distribution.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1314-1319
• /
• 2008

Fatigue reliability problems are nowadays actively considered in the design of mechanical components. Recently, Dimension Reduction Method using Kriging approximation (KDRM) was proposed by the authors to efficiently calculate statistical moments of the response function. This method, which is more tractable for its sensitivity-free nature and providing the response PDF in a few number of analyses, is adopted in this study for the reliability analysis. Before applying this method to the practical fatigue problems, accuracies are studied in terms of parameters of the KDRM through a number of numerical examples, from which best set of parameters are suggested. In the fatigue reliability problems, good number of experimental data are necessary to get the statistical distribution of the S-N parameters. The information, however, are not always available due to the limited expense and time. In this case, a family of curves with prediction interval, called P-S-N curve, is constructed from regression analysis. Using the KDRM, once a set of responses are available at the sample points at the mean, all the reliability analyses for each P-S-N curve can be efficiently studied without additional response evaluations. The method is applied to a spring design problem as an illustration of practical applications, in which reliability-based design optimization (RBDO) is conducted by employing stochastic response surface method which includes probabilistic constraints in itself. Resulting information is of great practical value and will be very helpful for making trade-off decision during the fatigue design.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.179-186
• /
• 2011

This paper suggests the minimum number of vertex guards algorithm. Given n rooms, the exact number of minimum vertex guards is proposed. However, only approximation algorithms are presented about the maximum number of vertex guards for polygon and orthogonal polygon without or with holes. Fisk suggests the maximum number of vertex guards for polygon with n vertices as follows. Firstly, you can triangulate with n-2 triangles. Secondly, 3-chromatic vertex coloring of every triangulation of a polygon. Thirdly, place guards at the vertices which have the minority color. This paper presents the minimum number of vertex guards using dominating set. Firstly, you can obtain the visibility graph which is connected all edges if two vertices can be visible each other. Secondly, you can obtain dominating set from visibility graph or visibility matrix. This algorithm applies various art galley problems. As a results, the proposed algorithm is simple and can be obtain the minimum number of vertex guards.