• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.31-38
• /
• 2006

이 논문에서는 클러터 환경에서 최적의 거리와 거리방향 속도 추적을 위한 검출문턱값과 파형 파라미터의 one-step-ahead 제어를 제시하였다. 파형 파라미터의 최적 제어는 파형 파라미터에 대한 제약 조건이 있는 상황에서 추적 성능지수를 최소화하는 것이다. 성능지수는 항적분실확률과 추정오차 공분산행렬의 함수로 표현하였다. 항적분실확률과 오차 공분산행렬은 하이브리드 알고리듬을 이용하여 얻었다. 거짓 검출과 클러터 간섭의 영향은 이 성능 예측 알고리듬에서 함께 고려되었다. 여기서 제안한 one-step-ahead 제어의 추적 성능을 여러 가지 수치실험을 통해 확인하였고, 이 제어 방법은 유한 구간의 최적화 결과로부터 얻어진 경험적인 방법이다.

• 한국통신학회논문지
• /
• 제28권2C호
• /
• pp.181-192
• /
• 2003

통신 채널에서 블라인드 등화는 전송효율을 저하시키는 훈련신호나 채널의 사전 정보가 필요치 않은 장점 때문에 많은 연구가 진행되어 왔다. 선형예측을 이용한 블라인드 등화는 등화기의 차수 추정 오차에 강인하며 적응 알고리듬을 이용하여 효율적으로 구현할 수 있는 장점이 있다. 하지만 기존의 one-step 선형예측을 이용한 블라인드 등화기는 임의의 결정 지연에 대해서는 구현할 수 없는 단점이 있다. 본 논문에서는 SIMO 채널에서 one-step 순방향 선형예측 필터를 이용하여 임의의 결정 지연을 갖는 블라인드 등화기를 제안한다. 제안한 알고리듬은 순방향 추정 오차를 훈련신호로 사용하여 최적의 결정 지연을 갖는 블라인드 등화기를 구하였으며 모의실험을 통하여 본 논문에서 제안한 알고리듬의 성능을 확인하였다.

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.243-250
• /
• 2010

연구 목적: 본 연구는 잘 맞는 임플란트 상부구조물에서 서로 다른 나사조임순서와 조임방법이 나사의 풀림토크값에 미치는 영향을 평가하였다. 연구 재료 및 방법: 서로 수동적 적합 관계를 갖는 완전 무치악 하악 주모형과 네 개의 평행한 임플란트 (Astra Tech)에 직접 연결되는 금속구조물을 제작하였다. 금속구조물과 잘 맞는 실험모형을 위해 주모형에서 연결인상법을 이용하여 여섯 개의 경석고 모형을 얻었다. 20 Ncm로 조인 후 나사의 풀림토크값을 두 번 측정하였다. 세 가지 나사조임순서 (1-2-3-4, 2-4-3-1, 그리고 2-3-1-4)와 두 가지 나사조임방법 (two-step과 one-step)에 대한 나사의 풀림토크값과 최소풀림토크값을 유의수준 .05에서 각각 다원분산분석법 (multi-way ANOVA)과 이원분산분석법 (two-way ANOVA)을 이용하여 통계분석 하였다. 결과: 나사조임순서에 대한 나사의 평균 풀림토크값은 12.8 Ncm (2-4-3-1)에서 13.1 Ncm (2-3-1-4)의 값을 보였고, 나사조임방법에 대한 값은 13.1 Ncm (two-step)와 11.8 Ncm (one-step)였다. 나사조임순서에 대한 나사의 평균 최소풀림토크값은 11.1 Ncm (1-2-3-4)와 11.2 Ncm (2-4-3-1과 2-3-1-4)였고, 나사조임방법에 대한 값은 11.2 Ncm (two-step)와 9.9 Ncm (one-step)였다. 나사의 풀림토크값과 최소풀림토크값은 세 가지 나사조임순서 간에 통계학적으로 유의성 있는 차이가 없었다. 그러나 두 가지 나사조임방법 간에는 두 값 모두 통계학적으로 유의성 있는 차이가 있었다. 나사를 두 단계로 나누어 조이는 방법이 한 번에 조이는 방법보다 더 큰 풀림토크값 (P = .0003)과 더 큰 최소풀림토크 값 (P = .0035)을 보였다. 결론: 본 연구와 같은 조건하에서, 연결인상법으로 얻은 잘 맞는 임플란트 상부구조물에 있어서 나사조임순서는 나사의 풀림토크값에 영향을 미치는 중요한 요소는 아니었다. 그러나 나사를 두 단계로 나누어 조이는 방법은 한 번에 조이는 방법보다 더 큰 풀림토크값을 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.179-182
• /
• 1997

One-step inverse methods based on deformation theory causes some amount of error. The amount of error is generally increased as the deformation path is more complex. As a remedy, a new three dimensional multi-step inverse method is introduced for optimum design of blank shapes and strain distributions from desired final shapes. The approach extends a one-step inverse method to a multi-step inverse method in order to reduce the amount of error. The algorithm developed is applied to square cup drawing to confirm its validity by demonstrating reasonably accurate numerical results.

• 핵의학기술
• /
• 제28권1호
• /
• pp.81-87
• /
• 2024

Purpose: CA 19-9 is the most widely used tumor marker for the diagnosis of digestive system tumor, especially pancreatic and biliary tract cancer. This study was conducted to improve the result value near reference range by comparing the reagents of CA 19-9 one step method and two step method. In addition, it was intended to establish a standard for selecting reagents. Material and Methods: 120 patients who visited the National Cancer Center in 2023 were selected as subjects for this study. The reagents used in the study were CA 19-9 IRMA kits (Shinjin, Korea) and three types of reagents were compared. Two step method reagent that is currently being used (A), one step method reagent (B) and two step method reagent improved by request (C) were compared and regression analysis was performed on their data. And we also performed recovery test, linearity test and hook effect test for each reagent. Result: There were 46 cases of reagent B in which the concentration value was lower than the result measured in reagent A that was previously used, and 77 cases of reagent C. As a result of regression analysis of reagents A, B, and C, the coefficients of determination of reagents A and B, reagents A and C, and reagents B and C were 0.653, 0.577, and 0.875. In the recovery rate test and the linearity test, the results of all reagents were good, and in the hook effect test, reagent B showed a hook effect at a low value. Conclusion: The improved reagent C appears to have been improved based on the concentration value of reagent B, which the manufacturer judged to be more stable at low concentrations. The hook effect in reagent B can be a fatal reason for disqualification when selecting reagents in general patient samples which high-concentration samples appear frequently. The first improved reagent C will be able to be used once it is confirmed that it has more stability for various concentration values.

• Molecules and Cells
• /
• 제39권9호
• /
• pp.687-691
• /
• 2016

Transcription activator-like effector nucleases (TALENs) are powerful tools for targeted genome editing in diverse cell types and organisms. However, the highly identical TALE repeat sequences make it challenging to assemble TALEs using conventional cloning approaches, and multiple repeats in one plasmid are easily catalyzed for homologous recombination in bacteria. Although the methods for TALE assembly are constantly improving, these methods are not convenient because of laborious assembly steps or large module libraries, limiting their broad utility. To overcome the barrier of multiple assembly steps, we report a one-step system for the convenient and flexible assembly of a 180 TALE module library. This study is the first demonstration to ligate 9 mono-/dimer modules and one circular TALEN backbone vector in a one step process, generating 9.5 to 18.5 repeat sequences with an overall assembly rate higher than 50%. This system makes TALEN assembly much simpler than the conventional cloning of two DNA fragments because this strategy combines digestion and ligation into one step using circular vectors and different modules to avoid gel extraction. Therefore, this system provides a convenient tool for the application of TALEN-mediated genome editing in scientific studies and clinical trials.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.240-247
• /
• 2006

Piezoelectric sensor-based health monitoring technique using a two-step support vector machine (SYM) classifier is discussed for damage identification of a railroad track. An active sensing system composed of two PZT patches was investigated in conjunction with both impedance and guided wave propagation methods to detect two kinds of damage of the railroad track (one is a hole damage of 0.5cm in diameter at web section and the other is a transverse cut damage of 7.5cm in length and 0.5cm in depth at head section). Two damage-sensitive features were extracted one by one from each method; a) feature I: root mean square deviations (RMSD) of impedance signatures and b) feature II: wavelet coefficients for $A_0$ mode of guided waves. By defining damage indices from those damage-sensitive features, a two-dimensional damage feature (2-D DF) space was made. In order to minimize a false-positive indication of the current active sensing system, a two-step SYM classifier was applied to the 2-D DF space. As a result, optimal separable hyper-planes were successfully established by the two-step SYM classifier: Damage detection was accomplished by the first step-SYM, and damage classification was also carried out by the second step-SYM. Finally, the applicability of the proposed two-step SYM classifier has been verified by thirty test patterns.

• 한국재료학회지
• /
• 제28권4호
• /
• pp.235-240
• /
• 2018

We propose a speedy two-step deposit process to form an Au electrode on hole transport layer(HTL) without any damage using a general thermal evaporator in a perovskite solar cell(PSC). An Au electrode with a thickness of 70 nm was prepared with one-step and two-step processes using a general thermal evaporator with a 30 cm source-substrate distance and $6.0{\times}10^{-6}$ torr vacuum. The one-step process deposits the Au film with the desirable thickness through a source power of 60 and 100 W at a time. The two-step process deposits a 7 nm-thick buffer layer with source power of 60, 70, and 80 W, and then deposits the remaining film thickness at higher source power of 80, 90, and 100 W. The photovoltaic properties and microstructure of these PSC devices with a glass/FTO/$TiO_2$/perovskite/HTL/Au electrode were measured by a solar simulator and field emission scanning electron microscope. The one-step process showed a low depo-temperature of $88.5^{\circ}C$ with a long deposition time of 90 minutes at 60 W. It showed a high depo-temperature of $135.4^{\circ}C$ with a short deposition time of 8 minutes at 100 W. All the samples showed an ECE lower than 2.8 % due to damage on the HTL. The two-step process offered an ECE higher than 6.25 % without HTL damage through a deposition temperature lower than $88^{\circ}C$ and a short deposition time within 20 minutes in general. Therefore, the proposed two-step process is favorable to produce an Au electrode layer for the PSC device with a general thermal evaporator.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1566-1577
• /
• 2015

A novel high step-up converter is presented herein, which combines the conventional buck-boost converter, the charge pump capacitor and the coupling inductor. By doing so, a quite high voltage conversion ratio due to not only the turns ratio but also the duty cycle, so as to increase design feasibility. It is noted that the denominator of the voltage conversion ratio is the square of one minus duty cycle. Above all, there is no voltage spike across the switch due to the leakage inductance and hence no passive or active snubber is needed, and furthermore, the used switch is driven without isolation and hence the gate driving circuit is relatively simple, thereby upgrading the industrial application capability of this converter. In this paper, the basic operating principles and the associated mathematical deductions are firstly described in detail, and finally some experimental results are provided to demonstrate the effectiveness of the proposed high step-up converter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.843-848
• /
• 2005

Currently the train traffic control system is built wholly by one package construction. It is under variable circumstance such as variation of signalling equipment and station expansion. This condition reduces system reliability and availability. And the term of system change is longer than 10 years, so it is hard to update to the latest technology and the new function. In order to do the system should be replaced to new one completely. The step by step construction of ADS(Autonomous Decentralized System) is one of the solution. So the simulation of it on the real station help to find system requirement and verify good of online expansion and online test.