• Journal of the Korean Geosynthetics Society
• /
• v.8 no.2
• /
• pp.47-54
• /
• 2009

The ballast track, the most common type of conventional railroad track in Korea, is deteriorated by abrasion of ballast, it's penetration into roadbed, and rugged surface of roadbed caused by cyclic loading of train. Persistent occurrence of those phenomena lead to insufficient drain capacity, one of major factors in track design, and it increases pore water pressure and decreases of shear strength under rainfall condition leading to unstable roadbed. In this study, cylindrical model tests are executed for 3 types of geotextile applying cyclic loading in order to observe the characteristics of displacement and bearing capacity of geotextile, and undrained condition has been applied for 0 day, 3 days and 7 days to each geotextiles. The results showed that there was about 1% difference at the final displacement rates between reinforced soils and nature soils and the displacement of the ground surface increases along with the degrees of the saturation. And in case that water contents exceeds the threshold, it is also apparent that weight and tensile strength of geotextile influences displacement of the ground surface. And the larger weight of geotextile is, the smaller plastic displacement. It is evaluated that non-woven fabric comes into effect on reducing the bearing capacity but, the weight of geotextile has little influence on it.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.130-137
• /
• 2012

This research evaluated the effectiveness of organic matter ratios in substrate and mulching materials under mn-irrigated condition green roofs by measuring the effects on growth of Liatris spicata. Four mulching materials were installed, i. e. nun-mulched control(CON), volcanic ash soils(VAS), non-woven black fabric mat(NBM) and pine bark(PAK). Three levels of organic maller volume percentage in an amended soil were evaluated, amended soil: organic matter=100:0($A_1O_0$), amended soil: organic matter=80:20($A_4O_1$) and amended soil: organic matter=50:50($A_1O_1$). Plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were recorded from April to September, 2010, and survival rate was examined on May 2011 of the following year. In the $A_1O_0$, the number of leaves, number of florets and chlorophyll contents were higher in Liatris spicata grown on NBM than other mulching treatments. Especially, plant height, shoot fresh and dry weight were significantly higher. However, it resulted the lowest survival rate than other mulching treatments. 2. In the $A_4O_1$, the plant height, number of leaves, number of florets, shoot fresh and dry weight were higher than other mulching treatments, but there was no significant difference except for the plant height of Liatris spicata grown on NBM. The survival rate was decreased by 40~60%, compared with $A_1O_0$, after overwintering. 3. In the $A_1O_1$, the plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were slightly higher than other mulching treatments, but there was no significant difference from Liatris spicata grown on NBM and VAS. The survival rate was observed by 0% over all mulching treatments after overwintering. Therefore, the non-woven black fabric mat(NBM) promoted the Liatris spicata's growth and flowering compared with other mulching treatments. However, the survival rate was decreased significantly, and the organic matter ratios were increased after overwintering under non-irrigated green roofs.

• Journal of Adhesion and Interface
• /
• v.10 no.3
• /
• pp.141-147
• /
• 2009

In this study, the high performance hybrid chemical filter (HPHCF) was prepared by web spray using hot melt adhesive. The material of HPHCF was conditionally made of ion exchange resin and PP non-woven fabric. The optimum temperature and pressure for manufacturing of HPHCF conditions were such as $170^{\circ}C$ and 50 psi, respectively. The characteristics of preparated HPHCF and their adsorption properties of ammonia gas were investigated. The ion exchange capacity (IEC) of HPHCF was increased with increasing the resin contents and their values were higher than pure resin and ion exchange fabrics. The removal efficiency for ammonia gas increased with the increase of packing density of hybrid ion exchange fabrics in the column. It showed 13 min which the adsorption breakthrough time was slower than resin and fibers. The maximum value of adsorption for ammonia gas was 98 percent. And also, the velocity was increased with increasing concentration and flow rate of ammonia gas.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.317-328
• /
• 2017

This paper presents design and specific absorption rate analysis of a 2.4 GHz wearable patch antenna on a conventional and electromagnetic bandgap (EBG) ground planes, under normal and bent conditions. Wearable materials are used in the design of the antenna and EBG surfaces. A woven fabric (Zelt) is used as a conductive material and a 3 mm thicker Wash Cotton is used as a substrate. The dielectric constant and tangent loss of the substrate are 1.51 and 0.02 respectively. The volume of the proposed antenna is $113{\times}96.4{\times}3mm^3$. The metamaterial surface is used as a high impedance surface which shields the body from the hazards of electromagnetic radiations to reduce the Specific Absorption Rate (SAR). For on-body analysis a three layer model (containing skin, fats and muscles) of human arm is used. Antenna employing the EBG ground plane gives safe value of SAR (i.e. 1.77W/kg<2W/kg), when worn on human arm. This value is obtained using the safe limit of 2 W/kg, averaged over 10g of tissue, specified by the International Commission of Non Ionization Radiation Protection (ICNIRP). The SAR is reduced by 83.82 % as compare to the conventional antenna (8.16 W/kg>2W/kg). The efficiency of the EBG based antenna is improved from 52 to 74 %, relative to the conventional counterpart. The proposed antenna can be used in wearable electronics and smart clothing.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.51-60
• /
• 2015

This study conducted shear strength test and plate bearing test to look into the characteristics of bearing capacity using geosynthetics case on forest road surface. The shear strength test showed that the internal friction angle at the time when geosynthetics was used was measured larger on average than that in the unreinforced case. Therefore, using geosynthetics case produced more bearing capacity reinforcement effect. The result from the comparison test of internal friction angle by geosynthetics type revealed that the internal friction angle at the time when geotextile case was used was measured larger. That was attributable to the difference between the area of the total cross section of geotextile made in type of non-woven fabric and its material. Plate bearing test showed that the settlement at the time when geosynthetics was used was measured smaller than that in the unreinforced case. Therefore, using geosynthetics produced more bearing power reinforcement effect. The result from the comparison test showed that geogrid case was measured smaller than geotextile case. Henceforth, It is seemed that it will be necessary to keep studying the reinforcement engineering and process of forest road surface which fits the characteristics and conditions of geosynthetics to prevent forest road demage.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.95-116
• /
• 2009

Korea-Us FTA negotiation started in February 2006 with a view to overcoming those uncertainties in the global market and was finally concluded in April, 2007. The Agreement was officially signed between ministers two month later and it is expected to be ratified this year even though the process is most likely to be painful in both countries by the political resistances. For the new President of the United States, effective leadership will depends largely on how to encourage domestic industries such as Automobile industry and Iron and Steel industry from the financial crisis. Many trading partners of US worry about US foreign trade policy changes to protectionism that might be unequal to bear. Korea textile industry is one of the major industry in Korea as it occupies 15% of total number of manufacturers, 11% of total employment and 5% of national GDP. Korea-US FTA will provide a breakthrough for bouncing back by exploring new market. US agreed to remove all tariff and non-tariff barriers to 87% of textile items under trading. This study shows that Korean textile industry has been losing it's competitiveness as textile quota system abolished in the year 2005 and has been traced by pursuers such as China, India and Vietnam. In case of woven fabric which was a representing export item of Korea lost price competitiveness against China after 2005. This study seeks the strategy of Korea textile industry in the US market by utilizing the capacity of KOTRA offices in US. All possible statistical data obtained in the US were used for analysing the competitiveness. Fabrics and Garments are analysed independently with a view to finding out real trends of textile market in US. This study also suggest Korea's textile industry strategic ideas obtained from the potential buyers to show the way to penetrate into US market.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.88-92
• /
• 2002

The study was conducted to estimate stimulation of plant growth of blue and red leaf lettuce (Lactuca sativa L.) as affected by covering methods with vinyl materials containing concentrated PO film. Plants were grown in direct, direct and tunnel, and tunnel covering with 'Pasraido materials' from October 13 to 31. With the covering mean air temperature, soil temperature, leaf temperature and relative humidity remarkedly increased. Higher temperature was observed in the order of direct and tunnel, direct, tunnel covering and the control. Photosynthetic photon flux (PPF, $\mu$mol m$^{-2}$ . s$^{-1}$ ) was observed in reverse order of temperature. Concentration of $CO_2$ was higher during night than during day under the light. Accumulation of highest $CO_2$ at night was obtained from direct coverings followed by direct and tunnel, tunnel covering and the control. Plant height, leaf number and leaf area of blue and red lettuces were stimulated by direct covering. However, there was no significant difference.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.11
• /
• pp.1792-1801
• /
• 2008

This study was to develope the pesticide-proof clothes(PPC) for fruit-grower which has been well known over applied agricultural chemicals. The ergonomic evaluation of PPC were tested in two ways. Male adults volunteered the tests to evaluate the safety to pesticide in the field and the thermal comforts in the climate-chamber($30^{\circ}C$, 60%R.H.). PPC were made of 4 different fabrics. Two of them were on the market(coated non-woven and coated nylon). Others were water-repellent treatment and coated waterproof film by developed polyester. The field study was conducted for farmers growing apples to evaluate pesticide exposure. In this experiment, we collected data with patch test on the head, chest, back, right upperarm, right forearm, left thigh and left calf. From the results, the developed PPC showed the more excellent comfort than an existing PPC with nylon coated polyurethane. But the developed PPC of water-repellent fabric was penetrated into the PPC. Therefore, we designed the functional pesticide-proof clothes of 2 different developed polyester fabrics(water-repellent treatment in chest, abdomen, the lower of back, waist, and calf; coated waterproof film in head, shoulder, the upper of back, the crotch, hip, upper arm and thigh).

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.53-59
• /
• 2008

The purpose of the study was to evaluate how much gastropod shell effected its properties better than crushed stone as coarse grained materials by comparing friction properties of a contact surface between coarse grained materials and geosynthetics with the large-scale direct shear test. To achieve the purpose, the study compared and analyzed friction coefficient and friction angle by making crushed stone or gastropod shell into model ground and by installing and shearing non-woven fabric or geostrip geosynthetics. As the results of the analysis, crushed stone had the internal friction angle of $33.8^{\circ}$ when its unit weight was $13.7kN/m^3$ and gastropod shell had the internal friction angle of $35.4^{\circ}$ when its unit weight was $5.4kN/m^3$. Also, the friction angle of a contact surface between geosynthetics and crushed stone was larger than the friction angle of a contact surface between geosynthetics and gastropod shell.