• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.3
• /
• pp.231-238
• /
• 2002

In this paper, we present a new approach to autopilot design for skid-to-turn missiles which may have severe aerodynamic cross-couplings and nonlinearities with angle of attack. The model of missile motion is derived in the maneuver plane and, based on that model, pitch, yaw, and roll autopilot are designed. They are composed of a nonlinear term which compensates for the aerodynamic couplings and nonlinearities and a linear controller driven by the measured outputs of missile accelerations and angular rates. Besides the outputs, further information such as Mach number, dynamic pressure, total angle of attack, and bank angle is required. With the proposed autopilot and simple estimators of bank angle and total angle of attack, it is shown by computer simulations that the induced moments and some aerodynamic nonlinearities are properly compensated and that the performance is superior to that of the conventional ones.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.77-86
• /
• 2018

This study develops an empirical prediction equation of spectral acceleration responses of earthquakes which can induce structural damages. Ground motion records representing hazards of low-to-moderate seismic regions were selected and organized with several influential factors affecting the response spectra. The empirical equation and estimator coefficients for acceleration response spectra were then proposed using a robust nonlinear optimization coupled with a regression analysis. For analytical verification of the prediction equation, response spectra used for low-to-moderate seismic regions were estimated and the predicted results were comparatively evaluated with measured response spectra. As a result, the predicted shapes of response spectra can simulate the graphical shapes of measured data with high accuracy and most of predicted results are distributed inside range of correlation of variation (COV) of 30% from perfectly correlated lines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.483-487
• /
• 1996

We consider the estimation of the position and orientation of 6 DOF motion bed (Stewart platform) from the measured cylinder length. The solution of forward kinematics is not solved yet as a useful realtime application tool because of the complity of the equation with multiple solutiple solutions. Hence we suggest an algorithm for the estimation of forward kinematics solution using Luenberger observer withnonlinear error correction term. The Luenberger observer withlinear model shows that the estimation error does not go to zero in steadystate due to the linearization error of the dynamic model. Hence the linear observer is modified using nonlinear measurement error equation and we prove thd practical stability of the estimation error dynamics of the proposed observer using lyapunov function.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.148-155
• /
• 2015

The Levenberg-Marquardt method is a well known solution about the least square problem. However, in a Target Motion Analysis(TMA) application most of researches have used the Gauss-Newton method as a batch estimator, which of inverse matrix calculation may causes instability problem. In this paper, Levenberg-Marquardt method is applied to TMA problem to prevent its divergence. In experiment, its performance is compared with Gauss-Newton in domain of range, course and speed. Monte Carlo simulation reveals the convergence time and reliability of the TMA based on Levenberg-Marquardt.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.503-509
• /
• 2007

Low-power motion estimation is required for video coding in portable information devices. In this paper, we propose a low-power motion estimation algorithm and 1-D systolic may VLSI architecture using full search block matching algorithm (FSBMA). Main power dissipation sources of FSBMA are complex computations and frequent memory accesses for data in the search area. In the proposed algorithm, memory accesses and computations are reduced by using 1D PE (processing array) array architecture performing motion estimation of two neighboring blocks in parallel and by skipping unnecessary computations during motion estimation. The VLSI implementation results of the algorithm show that the proposed VLSI architecture can save 9.3% power dissipation and can operate two times faster than an existing low-power motion estimator.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.293-304
• /
• 2011

In this paper, we proposed a new hardware architecture for motion estimation (ME) which is the most time-consuming unit among H.264 algorithms and designed to the type of intellectual property (IP). The proposed ME hardware consists of buffer, processing unit (PU) array, SAD (sum of absolute difference) selector, and motion vector (MVgenerator). PU array is composed of 16 PUs and each PU consists of 16 processing elements (PUs). The main characteristics of the proposed hardware are that current and reference frames are re-used to reduce the number of access to the external memory and that there is no clock loss during SAD operation. The implemented ME hardware occupies 3% hardware resources of StatixIII EP3SE80F1152C2 which is a FPGA of Altera Inc. and can operate at up to 446.43MHz. Therefore it can process up to 50 frames of 1080p in a second.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1541-1550
• /
• 2004

In this paper, we propose an advanced hardware architecture for fast multi-resolution motion estimation of the video coding standard MPEG-1,2 and MPEG-4 AVC. We describe the algorithm and derive hardware architecture emphasizing the importance of area for low cost and fast operation by using the shared memory, the special ram architecture, the motion vector for 4 pixel x 4 pixel, the spiral search and so on. The proposed architecture has been verified by ARM-interfaced emulation board using Excalibur Altera FPGA and also by ASIC synthesis using Samsung 0.18 m CMOS cell library. The ASIC synthesis result shows that the proposed hardware can operate at 140 MHz, processing more than 1,100 QCIF video frames or 70 4CIF video frames per second. The hardware is going to be used as a core module when implementing a complete MPEG-4 AVC video encoder ASIC for real-time multimedia application.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.1
• /
• pp.24-30
• /
• 2000

The aim of this paper is to describe an advanced method of the fault diagnosis using Control Theory with reference to a crack detection, a new way to localize the crack position under influence of the plant disturbance and white measurement noise on a rotating shaft. As the first step, the shaft is physically modelled with a finite element method as usual and the dynamic mathematical model is derived from it using the Hamilton-principle and in this way the system is modelled by various subsystems. The equations of motions with a crack are established by the adaption of the local stiffness change through breathing and gaping[1] from the crack to the equation of motion with an undamaged shaft. This is supposed to be regarded as a reference system for the given system. Based on the fictitious model of the time behaviour induced from vibration phenomena measured at the bearings, a nonlinear state observer is designed in order to detect the crack on the shaft. This is the elementary NL-observer(EOB). Using the elementary observer, an Estimator(Observer Bank) is established and arranged at the certain position on the shaft. In case, a crack is found and its position is known, the procedure, fro the estimation of the depth is going to begin.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.741-748
• /
• 2001

In this paper, we propose a method of tracking and capturing a moving object by a mobile robot. The position of the moving object is acquired from the relation through color-based image information from a 2-DOF active camera mounted on the mobile robot. The direction and rotational angular velocity of the moving object are estimated using a state estimator. A Kalman fiber is used as the state estimator for taking characteristics of robustness against noises and uncertainties included in the input data. After estimating the trajectory of the moving object, we decide on the optimal trajectory and plan the motion of the mobile robot to capture the target object within the shortest distance and time. The effectiveness of the proposed method is demonstrated by the simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.506-506
• /
• 2000

To improve control performance of a non-linear system, many other researches have used the sliding mode control algorithm. The sliding mode controller is known to be robust against nonlinear and unmodeled dynamic terms. However. this algorithm raises the inherent chattering caused by excessive switching inputs around the sliding surface. Therefore, in order to solve the chattering problem and improve control performance, this study has developed the sliding mode controller with a perturbation estimator using the observer-based fuzzy adaptive network generates the control input for compensating unmodeled dynamics terms and disturbance. And, the weighting parameters of the fuzzy adaptive network are updated on-line by adaptive law in order to force the estimation errors to converge to zero. Therefore, the combination of sliding mode control and fuzzy adaptive network gives rise to the robust and intelligent routine. For evaluating control performance of the proposed approach. tracking control simulation is carried out for the hydraulic motion simulator which is a 6-degree of freedom parallel manipulator.