• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.3-4
• /
• 2011

The purpose of this study is to suggest basic data for development optimal disassembly manufacturing system during analysis pore structure and heating properties of cementitious joint using conductive resister by induction heating. From the results, we knew cementitious joint is weak easily by heating of conductive resister, such as wire mesh, punching metal, and steel fiber, from induction heating.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.9-14
• /
• 2017

The design and manufacturing tehcnology of IC sockets beyond 0.3mm pitch were presented. We compared the developed IC socket with the conventional one especially on the core metal-insulation part. Advanced machining techniques were employed to provide high precision. Our wire electrodischarge machining and high speed machining centers were able to maintain the micro-scale precision. We performed an injection molding analysis using a commercial analysis tool to predict the performance of the developed IC socket. We found that the solidification of the plastic resin and the high level of the clamping force are responsible for the defects such as incomplete filling and short shot. From these results, we modified the IC socket and successfully remove the defects. We were also able to find out that the new design socket needs less maintenance cost.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.106-113
• /
• 1998

In this study, the plug weldability of STS 304 was investigated. The parameters which influence plug weldability were pushing pressure of the plates, position of welding wire and composition of shielding gases. Among these factors, the composition of shielding gases and hole diameter of the upper plate were found to be the major factors influencing weld quality. To evaluate weldability, tensile shear strength of the plug welded specimen was measured and compared with tensile strength of butt welded specimen. Hardness was measured for both plug weld and butt weld. The microstructure of the weld metal and HAZ were also characterized.

• 산업융합연구
• /
• 제2권2호
• /
• pp.31-46
• /
• 2004

The ratio of industrial injury in Korea is higher 2~4 times than advanced nations like Japan and Singapore, because the industrial injuries in small-medium industry are higher than large size industry. The investment ability is insufficient for working conditions and prevention of the industrial injuries in the small & medium industry. The industrial safety management of machinery manufacturing for transportation, chemical factory, textile product manufacturing, wire & circuit products for computer, plastic goods manufacturing, and metal products manufacturing was investigated. Therefore, the purpose of the paper is to recognize the seriousness of the industrial injuries, understand product, layout, and machinery, and working conditions, etc., and indicate safety engineering techniques for improvement of quality and productivity under this safety working conditions.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.8-16
• /
• 2003

A major concern in Gas Metal Arc (GMA) welding process is the determination of welding process variables such as wire diameter, gas flow rate, welding speed, arc current and welding voltage and their effects on the desired weld bead dimensions and shape. To successfully accomplish this objective, 81 welded samples from mild steel AS 1204 flats adopting the bead-on-plate technique were employed in the experiment. The experimental results were used to develop a mathematical model to predict the magnitude of bead geometry as follows; weld bead width, weld bead height, weld bead penetration depth, weld penetration shape factor, weld reinforcement shape factor, weld bead total area, weld bead penetration area, weld bead reinforcement area, weld bead dilution, length of weld bead penetration boundary and length of weld bead reinforcement boundary, and to establish the relationships between weld process parameters and bead geomery. Multiple regression analysis was employed for investigating and modeling the GMA process and significance test techniques were applied for the interpretation of the experimental data.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.166-175
• /
• 2023

We theoretically analyze and experimentally demonstrate a polarization-diversified four-channel optical demultiplexer (DeMUX) comprising a hybrid mode conversion-type polarization splitter rotator (PSR) and delayed Mach-Zehnder interferometer optical DeMUX for use in coarse wavelength division multiplexing (CWDM)-based optical interconnect applications. The Si wire-based device fabricated by a complementary metal-oxide semiconductor-compatible process exhibited nearly the same filter spectral response irrespective of the input polarization state under the PSR. The device had an extremely low insertion loss of <1.0 dB, polarization-dependent loss of <1.0 dB, and interchannel imbalance of <0.5 dB, suppressing unwanted wavelength and polarization crosstalk from neighboring channels of <-20 dB at each peak transmission channel grid.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.403-408
• /
• 2023

In this paper, we introduce the results of the development of a care robot for the safe lifting and transportation of bedridden patients with difficulty moving by themselves, especially, in medical facilities. The purpose of the developed patient transfer robot is to improve the convenience of care givers and enhance the safety and comfort of care recipients by facilitating patient lifting and patient transfer tasks by applying robot technology. In order to implement the lifting function, a hoist was designed and developed, and a sway control and rollover warning system were included in the hoist module as product differentiators. In addition, in terms of implementing the transfer function, an omnidirectional movement mechanism to improve operability in confined spaces and an active safety system to prevent collisions were developed. The function of the developed patient transfer robot was verified through performance evaluation by an authorized testing agency.

• 분석과학
• /
• 제18권2호
• /
• pp.112-119
• /
• 2005

본 연구에서는 황산을 이용하여 폐에나멜동선에서 에나멜의 효과적인 제거와 실험온도 $80^{\circ}C$ 상에서 과산화수소와 질산을 사용하여 유기물질의 분해에 대하여 연구하였다. 무균조에 에나멜동선과 황산을 넣고 과산화수소, 질산을 첨가하였다. 동선의 표면 에나멜은 90% 황산에 분해되었으며, 이 용액은 35% 과산화수소 또는 60% $HNO_3$에 분해되었다. 과산화수소에서 과산화수소 황산의 $H_2O$와의 비는 적어도 8.8 : 1.0 이었다. 초기에 황산농도에서의 분해는 15분내에 이루어졌으며 박리시간은 약 2 시간 이었다. 반응조내에서 과산화수소와 질산농도는 상대적으로 낮지만 에나멜 물질을 제거하기에는 충분한 양이었다. 동선에 피복된 에나멜 물질을 제거하는 것은 황산에 의한 탈수반응과 $H_2O_2$와 $HNO_3$에 의한 산화분해반응에 있다.

• 한국수소및신에너지학회논문집
• /
• 제12권4호
• /
• pp.277-285
• /
• 2001

본 논문은 연료전지 자동차용 10kWe급 정제일체형 메탄올개질기에 대한 연구결과이다. 이 개질기에서는 메탄올이 수증기와 반응하켜 수소를 포함한 혼합가스로 개질되고, 그 혼합가스는 다시 Palladium 합금막을 통하여 순수한 수소로 분리된다. 정제되고 남은 폐 가스중 가연성분들은 wire-mesh 형태의 연소촉매상에서 연소되어 개질반응에 필요한 열을 직접 공급함으로써 높은 메탄올 전환율, 고품질의 수소생산, 그리고 높은 시스템 열효율을 가능하게 한다. 동시에 이러한 개질, 분리 및 연소반응이 하나의 반응기에서 일어나 전체 시스템이 소형화될 수 있으며 운전이 용이한 장점도 있다. 본 연구팀에서 개발한 10kWe급 시스템은 운전연구를 통하여 수소생산량은 $8.2Nm^3/hr$ (10kWe급), 수소순도 99.999% 이상, CO 농도 5 ppm 미만, 총합열효율 81%, 초기기동 소요시간 20분, 부하변동웅답 1 분 이내를 달성했으며, 장처의 크기와 무게는 각각 16 L, 25 kg 이다.

• 한국터널지하공간학회 논문집
• /
• 제8권2호
• /
• pp.183-196
• /
• 2006

카메라 방식의 3D 스캐너로부터 구한 암석 절리면의 거칠기를 만곡과 요철의 거칠기 성분으로 구분하였다. 거칠기의 구분 기준은 이전의 연구에서 도출된 것을 적용하였으며, 구분 방법으로는 디지털 필티링 기법을 사용하였다. 원래의 프로파일과 구분한 프로파일을 사용하여 금속 주형을 제작하였으며, 정밀한 가공을 위하여 WEDM(Wire-cut Electric Discharge Machining)을 사용하였다. 고강도 석고를 사용하여 시편을 복제하였고, 절리면 전단시험을 실시하였다. 낮은 연직응력 범위와 높은 연직응력 범위에서 전단시험을 실시하고, 거칠기의 규모와 연직응력에 따른 발현 특성을 분석하였다. 절리면 전단강도 예측을 위한 새로운 상관식을 제안하였으며, 이 상관식은 거칠기의 발현 특성과 거칠기 계수의 특성을 모두 효과적으로 고려할 수 있었다. 그러므로 거칠기의 구분에 의한 정량화가 절리면 전단강도 예측을 위한 효과적인 방법이 될 수 있음을 확인할 수 있었다.