• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.57-63
• /
• 2015

Recently, LED is widely used in the kinds of display devices or lighting. In this paper, we fabricated LED chamber light for naval vessels to replace to conventional chamber light using incandescent lamp. The LED package of chamber light was designed with luminous intensity of 5.5 cd, color temperature of $6,000{\pm}500K$, forward voltage of 3~3.2 V and input current of 60 mA. A LED module was composed of 36 LED packages and metal PCB. The VF and luminous intensity of LED package were getting down when temperature increased. The temperature of LED chamber light was measured by changing the number of LED package and applied current for one hour when an electric current flow. The heat transfer capability have been improved by using metal PCB. The power consumption of LED chamber light reduced by 86% compared to the conventional chamber light using incandescent lamp.

• 전자공학회논문지C
• /
• 제36C권9호
• /
• pp.13-19
• /
• 1999

본 논문에서는 1mW의 낮은 전력소모를 갖는 8-bit 100KSPS CMOS A/D 변환기를 설계, 제작하였다. Cyclic 구조를 갖는 A/D 변환기에서 발생하는 연산증폭기의 시스템적인 offset 전압을 효과적으로 감소시키기 위해, 새로운 시스템적인 offset 전압 제거 기술을 제안하였다. 또한 기존 Gain 증폭기에서 발생하는 오차를 감소시키기 위해 완전 차동 구조의 Gain 증폭기를 설계하였다. 제안된 A/D 변환기는 $0.6{\mu}m$ single-poly triple-metal n-well CMOS 공정을 사용하여 제작되었으며, +3V 단일 공급전압에서 DNL과 INL은 ${\pm}1LSB$ 이내로 측정되었고, 100KHz의 샘플링 주파수에서 43dB의 SNR를 갖는다. 측정된 최대전력소모는 $980{\mu}W$로 나타났다.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.343-348
• /
• 2012

본 논문에서는 Digital PFC Controller에 적합한 11비트 100KS/s의 Algorithmic ADC를 설계하였다. 설계한 Algorithmic ADC는 PFC controller에 적합한 11비트 해상도를 만족하면서 반복적인 순환구조의 동작으로 인해 전체 크기를 줄일 뿐 아니라 소비 전류를 최소화 할 수 있다. 본 논문의 Algorithmic ADC는 0.18um 1Poly-3Metal의 CMOS 공정으로 제작 되었으며 100KS/s의 동작 속도에 SNDR 66.7dB, ENOB 10.78비트의 성능을 가진다. 또한 소비전류는 5V 전원 전압에서 780uA이며 설계된 ADC의 칩 면적은 $0.27mm^2$이다.

• 센서학회지
• /
• 제27권6호
• /
• pp.362-367
• /
• 2018

A complementary metal oxide semiconductor (CMOS) binary image sensor is proposed for low-power and low-noise operation. The proposed binary image sensor has the advantages of reduced power consumption and fixed pattern noise (FPN). A gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector is used as the proposed CMOS binary image sensor. The GBT PMOSFET-type photodetector has a floating gate that amplifies the photocurrent generated by incident light. Therefore, the sensitivity of the GBT PMOSFET-type photodetector is higher than that of other photodetectors. The proposed CMOS binary image sensor consists of a pixel array with $394(H){\times}250(V)$ pixels, scanners, bias circuits, and column parallel readout circuits for binary image processing. The proposed CMOS binary image sensor was analyzed by simulation. Using the dynamic comparator, a power consumption reduction of approximately 99.7% was achieved, and this performance was verified by the simulation by comparing the results with those of a two-stage comparator. Also, it was confirmed using simulation that the FPN of the proposed CMOS binary image sensor was successfully reduced by use of the double sampling process.

• 한국수산과학회지
• /
• 제52권5호
• /
• pp.452-460
• /
• 2019

Exposure to heavy metals through the consumption of contaminated seafood poses a health risk to humans. In Korea, seafood imports are increasing with consumption, with the largest increase in imported seafood coming from Russia. Peter the Great Bay and the Razdolnaya River are both major fisheries and protected areas under the Northwest Pacific Action Plan located near Vladivostok, Russia. This study analyzed heavy metal [cadmium (Cd), lead (Pb), total mercury (tHg), and total (tAs), and inorganic (iAs) arsenic] concentrations in shellfish and crustaceans collected from these areas. Except for iAs, the major toxic heavy metal concentrations of the samples met the national standards (Cd, 0.024-0.982 and 0.003-0.379 mg/kg; Pb, 0.021-1.533 and 0.002 mg/kg; tHg, 0.006-0.015 and 0.036-0.097 mg/kg). The tAs concentrations of three samples exceeded the Russian standard (5 mg/kg, wet weight), whereas the iAs concentrations were extremely low (ND-0.033 mg/kg). Compared with the provisional tolerable weekly intake (PTWI) of the Ministry of Food and Drug Safety and Joint FAO/WHO Expert Committee on Food Additives, the percentages of PTWI of Cd, Pb, and tHg were 0.239%, 0.001-0.049%, and 0.013-0.302%, respectively. These findings reveal that there is no potential health risk by heavy metals through the consumption of Russian seafood obtained in the surveyed areas.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.183-188
• /
• 2015

A 10-bit 10MS/s low power consumption successive approximation register (SAR) analog-to-digital converter (ADC) using a straightforward capacitive digital-to-analog converter (DAC) is presented in this paper. In the proposed capacitive DAC, switching is always straightforward, and its value is half of the peak-to-peak voltage in each step. Also the most significant bit (MSB) is decided without any switching power consumption. The application of the straightforward switching causes lower power consumption in the structure. The input is sampled at the bottom plate of the capacitor digital-to-analog converter (CDAC) as it provides better linearity and a higher effective number of bits. The comparator applies adaptive power control, which reduces the overall power consumption. The differential prototype SAR ADC was implemented with $0.18{\mu}m$ complementary metal-oxide semiconductor (CMOS) technology and achieves an effective number of bits (ENOB) of 9.49 at a sampling frequency of 10MS/s. The structure consumes 0.522mW from a 1.8V supply. Signal to noise-plus-distortion ratio (SNDR) and spurious free dynamic range (SFDR) are 59.5 dB and 67.1 dB and the figure of merit (FOM) is 95 fJ/conversion-step.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.35-42
• /
• 2004

본 논문에서는 저 전력, 고속 동작을 위하여 트랜지스터 차동쌍 폴딩 회로를 사용하는 CMOS 폴딩 ADC를 설계하였다. 본 논문에서는 제안한 트랜지스터 차동쌍 폴딩 회로에 대한 동작원리와 기존의 폴딩 회로에 비해 어떤 장점을 가지고 있는지 설명한다. 이 회로를 적용하여 설계한 ADC에서는 폴딩신호를 처리하기 위하여 16 개의 정밀한 전압비교기와 32 개의 인터폴레이션 저항을 사용하므로 저 전력, 고속동작이 가능하고, 작은 칩 면적으로 제작할 수 있다. 설계공정은 0.25㎛ double-poly 2metal n-well CMOS 공정을 사용하였다. 모의실험결과 2.5V 전원전압을 인가하고 250MHz의 클럭 주파수에서 45mW의 전력을 소비하였으며 측정값을 통하여 계산된 INL은 ±0.15LSB, DNL은 ±0.15LSB, SNDR은 10MHz 입력신호에서 50dB로 측정되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.143-146
• /
• 2011

본 논문은 1.2Vpp differential 입력 범위를 가지는 50-MS/s 10-hit pipelined ADC를 소개한다. 설계된 pipelined ADC는 8단의 1.5bit/stage, 1단의 2bit/stage와 digital correction 블록, bias circuit 및 reference driver, 그리고 clock generator로 구성된다. 1.5bit/stage는 sub-ADC, DAC, gain stage로 구성된다. 특히, 설계된 pipelined ADC에서는 hardware와 power consumption을 줄이기 위해 SHA를 제거하였으며, 전체 ADC의 dynamic performance를 향상시키기 위해 linearity가 개선된 bootstrapped switch를 사용하였다. Sub-ADC를 위한 reference 전압은 외부에서 인가하지 않고 on-chip reference driver에서 발생시킨다. 제안된 pipelined ADC는 1.8V supply, $0.18{\mu}m$ 1-poly 5-metal CMOS 공정에서 설계되었으며, power decoupling capacitor를 포함하여 $0.95mm^2$의 칩 면적을 가진다. 또한, 60mW의 전력소모를 가진다. 또한, Nyquist sampling rate에서 9.3-bit의 ENOB를 나타내었다.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1058-1063
• /
• 2020

본 논문은 생체 신호 및 센서 신호 처리를 위하여 저전력으로 동작하는 12비트 SAR A/D 변환기를 제안한다. 기존의 SAR A/D 변환기의 전력소모를 줄이고자, 동적 전류를 감소시켜 전체 전력 소모를 감소시켰다. 동적 전류를 감소시키기 위해서 C-DAC 비트 스위치를 동작시키는 샘플링 시간을 클럭 생성기의 샘플링 시간과 다르게 인가하였다. 추가적으로 SAR A/D 변환기의 전체 전력소모 중 70%를 차지하는 디지털 블록의 공급전압을 0.6V로 낮춰 설계하였다. 제안하는 SAR A/D 변환기는 CMOS 65nm 공정 1-poly 6-metal을 사용하여 설계하였으며, 1.2V의 공급전압으로 동작하며, ENOB는 10.1 비트, INL/DNL은 ±0.5LSB/±1.2LSB이며, 전체 전력소모는 31.2uW이고 FoM은 2.8fJ/step 이다.

• 식품보건융합연구
• /
• 제6권1호
• /
• pp.21-27
• /
• 2020

The levels of five heavy metals (mercury, cadmium, lead, copper and zinc) were analyzed in edible tissues of Lophius piscatorius Linnaeus, 1758 marketed in Sinop coasts of the Black Sea by using inductively coupled plasma mass spectrometry. With the present study, heavy metal values of this fish in the Black Sea were examined for the first time. The mean concentrations in mg kg^-1 wet wt. of Hg, Cd, Pb, Cu and Zn were 0.022, 0.009, 0.035, 6.3 and 16 mg kg^-1 wet wt., respectively. The results of the present study indicate that the consumption of muscle from anglerfish can be considered safe in terms of permissible legal limits. It is clear that, Zn showed the high accumulation in muscle tissue followed by Cu, while non-essential metals Hg, Cd and Pb showed the low accumulation. This could be explained by the fact that Zn and Cu are essential elements in the bodies of living organisms and has an important role in different physiological processes. In the present study, heavy metal levels in angler fish were low. Likewise, the calculated HI values were lower than one. In conclusion, the results of the present study indicate that the consumption of muscle from anglerfish can be considered safe in terms of permissible legal limits and hazard index values.