• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.7
• /
• pp.757-764
• /
• 1990

The purpose of this study is to process binary images of Breadth First Linear Quadtree in hardware. Inthis paper, we designed and verified logic level circuit of ASIC for the encoding part of the binary image that is to convert the binary image into the representation of the Breadth First Linear Quadtree. The logic level circuit is composed of cells in TTL library. The significance of thes study is to implement an algorithm by hardware rather than by software, so that the processing time can be reduced by about 20 times.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.717-727
• /
• 2021

In this study, new multiplier and adder method designs with multiplexers are proposed. The designs are based on quaternary logic and a carbon nanotube field-effect transistor (CNTFET). The design utilizes 4 × 4 multiplier blocks. Applying specific rotational functions and unary operators to the quaternary logic reduced the power delay produced (PDP) circuit by 54% and 17.5% in the CNTFETs used in the adder block and by 98.4% and 43.62% in the transistors in the multiplier block, respectively. The proposed 4 × 4 multiplier also reduced the occupied area by 66.05% and increased the speed circuit by 55.59%. The proposed designs are simulated using HSPICE software and 32 nm technology in the Stanford Compact SPICE model for CNTFETs. The simulated results display a significant improvement in the fabrication, average power consumption, speed, and PDP compared to the current bestperforming techniques in the literature. The proposed operators and circuits are evaluated under various operating conditions, and the results demonstrate the stability of the proposed circuits.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.52-58
• /
• 2006

Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.314-321
• /
• 2020

Logic automated stimulus and response (LASAR) software is an automatic test program development tool for logic function test and fault detection of avionics components digital circuit cards. LASAR software needs to the information for the logic circuit function and input and output of the device. If there is no component information, normal component modeling is impossible. In this paper, component modeling is carried out through reverse design of programmable logic device (PLD) device without element information. The developed LASAR program identified failure detection rates through fault simulation results and single-seated fault insertion methods. Fault detection rates have risen by 3% to 91% for existing limited modeling and 94% for modeling through the reverse design. Also, the 22 case of stuck fault with the I/O pin of EP310 PLD were detected 100% to confirm the good performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.6
• /
• pp.558-563
• /
• 2005

In this paper, we implemented a web-based virtual laboratory system(VLab system) with creative and interactive multimedia contents, which can be used to enhance the quality of education in the area of digital logic circuits. Since the proposed VLab system is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. Also, the VLab system is designed to increase the learning and teaching efficiencies of both the learners and the educators, respectively. The learners will be able to achieve high teaming standard and the educators save their time and labor. The virtual experiments on our VLab system are performed according to the following procedure: (1) Circuit composition on the virtual bread board (2). Applying input voltage (3) Output measurements (4) Checkout of experiment results. Furthermore, the circuit composition on the virtual bread board and its corresponding online schematic diagram are displayed together on the VLab system for the learner's convenience. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.413-420
• /
• 2012

In this paper, PBL-based design education(PBDE) techniques for effective engineering design education to assess the infrastructure and outcome of creative engineering education which has been recognized as an important target in accreditation system of engineering education and a case of contents development as PBDE application to the logic circuit design that is essential integrant course of IT division of universities is presented. Because integrant design is based on compositional technologies with restricted realistic constraints, design components and the application of realistic constraints are different from those of capstone design. PBL technique must be carefully considered as it is used for creative design education. We applied the developed content to real design classes for validation of its performance and effectiveness.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.104-107
• /
• 2005

We have developed and tested an RSFQ 4-bit Arithmetic Logic Unit (ALU) based on half adder cells and de switches. ALU is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. We have simulated the circuit by using Josephson circuit simulation tools in order to reduce the timing problem, and confirmed the correct operation of the designed ALU. We used simulation tools of $XIC^{TM},\;WRspice^{TM}$, and Julia. The fabricated 4-bit ALU circuit had a size of $\3000{\ cal}um{\times}1500{\cal}$, and the chip size was $5{\cal} mm{\times}5{\cal}mm$. The test speeds were 1000 kHz and 5 GHz. For high-speed test, we used an eye-diagram technique. Our 4-bit ALU operated correctly up to 5 GHz clock frequency. The chip was tested at the liquid-helium temperature.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2012

Multiple-control Toffoli(MCT) gates are macro-level multiple-valued gates needing quantum technology dependent primitive gates, and have been used in Galois Field sum-of-product (GFSOP) based synthesis of quantum logic circuit. Reversible logic is very important in quantum computing for low-power circuit design. This paper presents a reversible GF4 multiplier at first, and GF4 multiplier based quaternary MCT gate realization is also proposed. In the comparisons of MCT gate realization, we show the proposed MCT gate can reduce considerably primitive gates and delays in contrast to the composite one of the smaller MCT gates in proportion to the multiple-control input increase.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.109-113
• /
• 2006

The Arithmetic Logic Unit (ALU) is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. We have developed and tested an RSFQ multi-bit ALU constructed with half adder unit cells. To reduce the complexity of the ALU, We used half adder unit cells. The unit cells were constructed of one half adder and three de switches. The timing problem in the complex circuits has been a very important issue. We have calculated the delay time of all components in the circuit by using Josephson circuit simulation tools of XIC, $WRspice^{TM}$, and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. The fabricated 1-bit, 2-bit, and 4-bit ALU circuits were tested at a few kilo-hertz clock frequency as well as a few tens giga-hertz clock frequency, respectively. For high-speed tests, we used an eye-diagram technique. Our 4-bit ALU operated correctly at up to 5 GHz clock frequency.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.6
• /
• pp.1-6
• /
• 2014

The delay-insensitive Null Convention Logic (NCL) asynchronous design as one of innovative asynchronous logic design methodologies has many advantages of inherent robustness, power consumption, and easy design reuses. However, transistor-level structures of conventional NCL gate cells have weakness of low speed, high area overhead or high wire complexity. Therefore, this paper proposes a new high-speed NCL gate cells designed at transistor level for high-speed, low area overhead, and low wire complexity. The proposed NCL gate cells have been compared to the conventional NCL gates in terms of circuit delay, area and power consumption.