• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.529-541
• /
• 2009

Hydrochemical, stable isotopic ($\delta^{18}O$ and dD) and noble gas isotopic analyses of seven hot spring water samples, eleven groundwater samples and six surface water samples collected from the Icheon and Pocheon area were carried out to find out hydrochemical characteristics, and to interpret the source of noble gases and the geochemical evolution of the hot spring waters. The hot spring waters show low temperature type ranging from 21.5 to $31.4^{\circ}C$ and the pH value between 6.69 and 9.21. Electrical conductivity of hot spring waters has the range from 310 to $735\;{\mu}S/cm$. Whereas the hot spring water in the Icheon area shows the geochemical characteristics of neutral pH, the $Ca-HCO_3$(or $Ca(Na)-HCO_3$) chemical type and a high uranium content, the hot spring water in the Pocheon area shows the characteristics of alkaline pH, the $Na-HCO_3$ chemical type and a high fluorine content. These characteristics indicate that the hot spring water in the Icheon area is under the early stage in the geochemical evolution, and that the hot spring water in the Pocheon area has been geochemically evolved. The $\delta^{18}O$ and ${\delta}D$ values of hot spring waters show the range of $-10.1{\sim}-8.69%o$ and from $-72.2{\sim}-60.8%o$, respectively, and these values supply the information of the recharge area of hot spring waters. The $^3He/^4He$ ratios of the hot spring waters range from $0.09\;{\times}\;10^{-6}$ to $0.65\;{\times}\;10^{-6}$ which are plotted above the mixing line between air and crustal components. Whereas the helium gas in the Icheon hot spring water was mainly provided from the atmospheric source mixing with the mantle(or magma) origin, the origin of helium gas in the Pocheon hot spring water shows a dominant crustal source. $^{40}Ar/^{36}Ar$ ratios of hot spring water are in the range of an atmosphere source.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.307-314
• /
• 2013

Purpose: The aim of this study was to evaluate the effect of immobilization of the recombinant human bone morphogenetic protein 2 (rhBMP-2) on anodized titaum implants coated with heparin to enhance the vertical alveolar ridge augmentation in the supraalveolar peri-implant defect region. Materials and methods: 18 pure titanium implants (7.0 mm in length, 3.5 mm in diameter) were manufactured for this study. All implants were anodized and designed insertion reference line marked with laser at the apical 2.5 mm from the fixture platform. Implantation of 6 noncoated anodized implants (Control group), 6 anodized implants physically adsorbed with rhBMP-2 by dip and dry method (BMP group) and 6 anodized implants chemically immobilized 3,4-dihydroxyphenylalanine (DOPA)-heparin/ rhBMP-2 (Hep-BMP group) was performed in the both mandibular of three male adult beagle dogs using split-mouth design. Radiologic examinations were performed immediately after implant placement and 4 and 8 weeks after implant placement. The amount of mesio-distal bone augmentation was evaluated by measuring the vertical distance from the platform to the marginal bone. Statistical analysis was performed using one-way analysis of variance (SPSS version 18.0) and multiple comparison analysis of The Kruskal-Wallis test and the Mann-Whitney U test. Statistical significance was established at the 5% significant level. Results: At the 4 weeks vertical alveolar ridge augmentation of Control group, BMP group and Hep-BMP group is $0.09{\pm}0.22mm$, $1.02{\pm}0.72mm$, and $1.29{\pm}0.51mm$, At the 8 weeks $0.11{\pm}1.26mm$, $1.11{\pm}0.58mm$, $1.59{\pm}0.79mm$ according to radiographic observations. The two experimental groups showed a significantly increasing in vertical bone height compared with the control group (P<.05). However, there is no significant difference between the BMP group and Hep-BMP group (P>.05). Conclusion: The rhBMP-2 coated implants were enhanced the vertical bone growth in the supraalveolar peri-implant defect area. However, there is no significant difference between chemically and physically coating method.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.597-616
• /
• 2013

Character industry is not only knowledge-based industry chiefly with copyrights but also motive power for creative economy to take a role functionally over the fields of industries because it has industrial characteristic as complement product to promote sale value in manufacturing industry and service industry and increase profit on sales. Since 2003, the national policy related to character has aimed to maximize effect among connected industries, extend its business abroad, enforce copyrights through the improvement of marketing system, develop industrial infrastructure through raising quality of character products. With the result of this policy, the successful cases of connected contents have been crystallized and domestic character industry has stepped up methodically since 2007. It is needed to reset the scales of character industry and industrial stats because there are more know-how of self industry promotion and more related characters through strategy of market departmentalization starting with cartoon, animation, games, novels, movies and musicals. Especially, The Korea government set our target for 'Global Top Five Character Power' since 2009 and has started to carry out to find global star characters, support to establish network among connected industries, diversify promotion channels, and develop licensing business. Particularly, since 2013, There have been prospered the indoor character theme park with time management just like character experimental marketing or Kids cafes using characters, the demand market of digital character focusing on SNS emoticon, and the performance market for character musical consistently. Moreover, The domestic and foreign illegal black markets on off-line have been enlarged, so we need another policy alternative. To prepare for the era of exploding character demand market and diversifying platform, it is needed to set up a solid strategy that is required the elements of policy changes in character industry to vitalize character industry and support new character design and connected contents. the following shows that the elements of policy changes related to the existing policy, the current position of market. Nowadays, the elements of policy changes in domestic character industry are that variety of consumers in the digital character market according to platform diversification, Convergence contents of character goods for the Korean waves, legalization of the illegal black contents market, and controling the tendency of consumers in departmentalized market. This can help find the policy issue entirely deferent with the existing character powers like US, Japan or Europe. In its final analysis, the alternatives are the promotion of models with contract copyrights of domestic and foreign connected contents, the diversification of profit models of platform economy, the additive development of target market related to enlarging the Korean waves, and the strategy of character market for the age-specific tendency according to developing character demand market.

• Journal of Ginseng Culture
• /
• v.2
• /
• pp.71-83
• /
• 2020

College students are the potential income classes preparing for income activities and are the main consumers of the future that are very important. In order to understand the current state of ginseng-related consumption culture of young consumers, this study wanted to examine university students' attitudes toward ginseng-related products and services in the future, and to find out their purchasing status, satisfaction, and intent to purchase them. In doing so, we looked at the relative influence of the relevant variables that affect the intent of the purchase. As a result, the variables that affect college student consumers' intention to purchase ginseng-related products were shown in the order of their reliability, economy, purchasing experience, subjective interest, monthly income, monthly allowance, pride in ginseng, and age. Of these, most of the variables had positive effects, but the average monthly income, monthly allowance, and age had negative effects. In other words, the higher the reliability, economy, and self-esteem of ginseng, the higher the willingness to buy ginseng, the higher the subjective interest in ginseng, the higher the age, the lower the monthly allowance, and the lower the income, the lower the willingness to buy ginseng. To promote college students' consumption of ginseng products, it is necessary to cut prices for the younger generation, enhance the quality of the products for the younger generation, improve the taste to overcome the negative aspects of rejecting the bitter and bitter taste, and, above all, induce consumers' attention. It is also necessary to expand accessibility through the development of convenient and easy-to-eat products for young people and the expansion of sales outlets. Recently, young consumers are interested in new products they have never experienced before, products that are good to certify because of their unique design or packaging, and retro products that stimulate nostalgia in the past, so they need to promote and provide information related to consumption of ginseng products in this regard. Considering the practicality and convenience of consumers, we propose consideration of personal consumers' taste curation services, which reflect their preference for products that are convenient to carry with them in line with various living environments, and can have synergy with other products.

• Journal of Science Education
• /
• v.37 no.3
• /
• pp.525-537
• /
• 2013

The purpose of this study was to investigate science integrated process skill of the students in science education center for the gifted. In order to do this, 'free-response test for the assessment of science process skills' developed by Yu-Hyang Kim(2013) was administered to 102 students(15 in elementary school science class, 58 in middle school science class I, and 29 in middle school science class II) who attend the program of science education center for the gifted in C university. The assessment tool measured 9 skills ; formulating inquiry questions, recognizing variables, formulating hypotheses, designing experiment, transforming data, interpreting data, drawing conclusions, formulating generalizations, and evaluating the designed experiments. As a result, the students in science education center for the gifted had relatively high scores in the area of 'formulating hypotheses' and 'recognizing variables', but they had relatively low scores in the area of 'transforming data', 'interpreting data', and 'evaluating the designed experiments'. The 2 items' percentage of correct answers were below 40% ; one is about a drawing a line graph in 'transforming data', and the other requires finding improvements of the experimental design in 'evaluation'. There was no significant difference between boys' scores and girls's one, and between the scores of students in the field of biology and those of students in the other fields(physics, chemistry, and earth science) in science integrated process skills. And there was significant difference according to the periods receiving the gifted education in 'formulating generalizations'. The teaching and learning has to focus on improving science integrated process skills in the program of science education center for the gifted and teaching and learning materials needs to be developed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.9-20
• /
• 2008

The government is planning to link a small park with the soon to be ready subway line 9 as a part of Seoul's policy, "The standard or plan for making a water-friendly space by water use" (2007). However, the specified concepts and instructions of the small parks need further work. Therefore, the policy is expected to expand to neighboring small parks near the subway station, but these are not supported by research or data which suggests the needs or actual user behavior and utilization of small parks. our country added the specified concept of small parks and theme parks to the classification of urban parks in the Urban Park Act Revision (2005.3.31), but the concept of small parks is not clearly settled in the law in the scopes of its function, scale, promotion nor particularly defined plans for small park projects. This study examines as small park near a subway station. The characteristics of there region and users vary from the characteristics of the station and region. In the "directions for concrete standards under the types of urban parks and green zones" (2007.2) the types of small parks are classified by "regional characteristics" and "user characteristics". Therefore, this study classifies the subject of neighboring small parks near subway stations as the neighborhood and small urban parks according to the Urban Park Act. The study was paralleled with observation and questionnaires on the analysis of the neighborhood and small urban parks. The actual conditions of park utilization and user behavioral characteristics were deducted by observation, while the questionnaire determined actual user utilization, importance and satisfaction level as well as the small park environment. This study largely focused on three aspects: park facility, design of this sentence isn't even complete. The second aspect isn't finished and the third isn't here.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.12-26
• /
• 2014

This study has researched the forms of arrangement and use of the oddly shaped stones which were used at palaces during Joseon Dynasty based on arrangements of stones as shown in Donggwoldo(東闕圖), and tried to identify its special features. The sorts of stone's arrangements which set formal patterns by assisting an axis in Donggwoldo can be classified as the single type using one stone, the symmetrical type using 2 stones symmetrically and the parallel type using 3 or more stones. The single type was used to endow a focal point and to accent centrality by arranging a stone on the axis performed from formal shaped buildings. The symmetrical type was used to show order and hierarchy by placing two odd-shaped stones on either side of a building. And the parallel type which is arranged three stones side by side, is put a middle stone on the central axis line to determine strong directional and frontality. Also similarity to method of arrangement of stones can be found from planting trees in a prominent way for scenery or planting trees symmetrically. Stones and trees can be chosen according to nature and scale of places and basically their effects of formation of axis and creating typical space is same. Based on these respect, the characteristics of arrangement of stones shown in Donggwoldo can be briefly summarized as follows. First, the oddly shaped stones were used by creating a centripetal space in order to show a grade of rank. Second, the distances among stones could be adjusted to the sizes of the architecture which was at the center. The aim was to provide stability through the balanced composition between the central axis and symmetrical structures. Third, the form of regularity was added by using stone vase in consideration of irregular shape of stone causing interference in forming regular symmetry. Fourth, a centrality was emphasized by adding change to central stones in the parallel type used 3 erect stones. Fifth, the sizes of stone were limited in order to make smooth for the mix and adjustment of its position with the types of other garden ornaments, so the oddly shaped stones in palace have portability. Sixth, the oddly shaped stones in palace which were appreciated as inspirational object basically were a sculpture of the same quality with suiseki (壽石), and the appreciative method, the composition and shape had developed in the same texture. Finally, the even number of stones by parallel type were arranged by equal partition. But odd number of stones followed the method with symmetrical arrangement on its center stone. These principles of stone arrangement are judged as distinguishing methods which oddly shaped stones was made and used in Joseon palaces.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.281-289
• /
• 2010

We determined the optimum ethanolic conditions for extraction of $\gamma$-oryzanol and other functional components from rice bran, using response surface methodology (RSM). A central composite design was used to investigate the effects of the independent variables of solvent ratio ($X_1$), extraction temperature ($X_2$), and extraction time ($X_3$), on dependent variables including yield ($Y_1$), total phenolic content ($Y_2$), electron-donating activity ($Y_3$), ferulic acid level ($Y_4$), and $\gamma$-oryzanol concentration ($Y_5$). Solvent ratio and extraction temperature were the most important factors in extraction. The maximum yield was at 22.56 mL/g ($X_1$), 78.19C ($X_2$), and 522.15 min ($X_3$), at the saddle point. Total phenolic levels were little affected by solvent ratio or extraction temperature. The maximum concentration of extracted total phenolics was 90.78mg GAE/100 g at 21.26 mL/g, $94.65^{\circ}C$, and 567.97 min. A maximum electron-donating ability of 54.72% was obtained with the parameters 20.20 mL/g,$81.89^{\circ}C$, and 701.87 min, at the highest point. The maximum level of ferulic acid components was 210.47 mg/100g at 5.22 mL/g, $79.66^{\circ}C$, and 575.24 min. In addition, the maximum $\gamma$-oryzanol concentration was 660.39 mg/100g at 5.10 mL/g, $81.83^{\circ}C$, and 587.39 min. The optimum extraction conditions were a solvent ratio of 10.45 mL/g, $80^{\circ}C$ extraction temperature, and 535 min extraction time. Predicted extraction levels under optimized conditions were in line with experimental values.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.74-82
• /
• 1979

Pinus densiflora S. et Z. which has the widest distribution and highest stock at present in Korea and has used as materials for fuel, house construction, furniture and many other purposes for several hundred years, is considered as one of major species of economic importance, although there are a few epidemic insect injuries and silvicultural difficulties in regeneration. However, since disorderly cutting has been conducted for long time, the valuable local stands have disappeared. Therefore immediate attempts should be taken on the gene conservation and genetic studies including heritabilities and genetic gains of desirable characters. One hundred and twently five plus trees have so far been selected from the nationwide area and kept for the purpose of seed orchard establishment and other theoretical studies. In this study, the wind pollinated seeds of grafted stocks of 13 plus trees in clone bank located in Suweon and the seeds of 4 Japanese plus trees were collected and their progenies were used for heritability study. As indicated in figure 1, thirteen plus trees are from the middle part of Korea and two experimental plantations were laid out in ]972 (1-1 stock) by the randomized block design with five replications, consisting of 10 trees line plots of each family in each replication. Tree height, root collar diameter and branch diameter at 1cm apart from the main stem were measured. The results are summarized as follows 1. The rank of height growth of each plus tree progenies by age was greatly changed under age 3 and it was affected more in poor site than good site. 2. The heritabilities of height growth were estimated to be 7.2% at age 3, negative sign at age 4, 9.4% at age 5, 13.0% at age 6, 8.1% at age 7 and abrupt increase of 63.8% at age 8. The heritabilities were generally increased with increase of age. 3. The heritabilities of root collar diameter and branch diameter (average of the three biggest branches) was 3.2% and 11.8% at age 8 respectively. 4. The genetic gain was largest at age 8 and it was 46.6% when a selection intensity, 1/500 was taken. It, therefore, seems to be reasonable that selection should not be made under age 7.