• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.17-20
• /
• 2004

There are lots of merits in the electrodeless lighting. But it is not widely used because the price is too high though it has very good quality and efficiency. So it is necessary to develop a electrodeless lighting which can be widely used with its merit.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.131-138
• /
• 1998

This field study was conducted to survey the effect of seating ＆ lighting conditions on work. The results were as follows ; Discomfortable parts of body caused by unsuitable sitting postures on work were low back 52.05%, leg 15.75%, neck 14.38% and arm 9.59%. Work conditions of sitting postures were needed arm rest, back rest of seat and adjustable seat height. Effect of work efficiency by lighting conditions were statistically significant relationship between glaring state of workstation and lighting state.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.163-166
• /
• 2004

There are lots of merits in the electrodeless lighting. But it is not widely used because the price is too high though it has very good quality and efficiency. So it is necessary to develop a electrodeless lighting which can be widely used with its merit.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.4
• /
• pp.153-158
• /
• 2009

This paper designed for natural lighting environment implementation with mixed color and white LED equipment. Lighting LED equipment Have a lot of advantage than traditional commercial lighting equipment. Such as high energy conversion efficiency and easy dimming control performance. This paper proposed LED lighting equipment with color sensor acquisition system can make best lighting environment for Human various kinds necessary.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.276-282
• /
• 2023

In this paper, we designed a lighting optical system using a freeform lens as a substitute for expensive gobo lighting. Unlike gobo lighting, freeform lens lighting does not use an image mask, and it can form and project an image directly on the lens surface using only a single lens, thus reducing the cost compared to gobo lighting. In order to verify the performance of freeform lens lighting with these advantages, we conducted an illuminance simulation. As a result, it was confirmed that it can replace gobo lighting because it has an illuminance distribution similar to the image we want to irradiate and a light efficiency of 47% similar to the performance of gobo lighting.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.11-21
• /
• 2012

In the normal office building, the energy consumption to maintain the reasonable intensity of illumination for the work by using the artificial illumination occupies 30% or greater of the whole building electric energy consumption. If the dependability of the artificial illumination is dropt by positively using the natural lighting from the outside, the large amount of electrical energy can be saved, in addition the more nice visual environment for work can be created. Daylight is lighting source that most closely match visual response of the human, because sunlight and skylight achieve the harmony. For this reason, the daylight of small amount than amount of the artificial lighting source also can give the same effect in work activities of human. In addition, if there is daylight at the window of the building, the energy can be saved by controlling the artificial lighting. In this paper, in the building using the photovoltaic power generation analyze the correlation between the amount of energy generated by photovoltaic and indoor illumination and this was proved through the simulation with Relux 2010. In addition, the amount of daylight inflow in the room and distribution was drawn by the equation and the ratio for the sectional dimming control of each lighting equipment was predicted and the energy saving amount according to this was calculated. As a result, the indoor illumination was satisfied with recommended illumination value of the office and consumption power could be reduced approximately with 20~70%.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.113-119
• /
• 2011

LED lighting has received much attention in recent years due to its high energy efficiency and environmental friendliness. As the color of light can be obtained by adjusting the light intensity of LEDs, the quality of visual environment can be improved. The aims of this study are to develop a wavelength adjustable LED lighting system and to examine its lighting performances. The LED lighting system and experimental cell for assessment of the lighting performance were constructed. This LED lighting system is able to materialize the various spectral power distribution and color temperature of light through the control of the four dimmers. Up to $432^4$ kinds of light combinations are possible. The range of illuminance on workplane were measured as 7~1,831 ㏓. Improvement of psychological and physical functions for occupants can be expected according to control of lighting performances.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.920-923
• /
• 2013

In this paper, the characteristics of a carbon nanotube composite heat sink proposed to replace the advanced Al heat sinks for LED lighting devices were studied. Proposed CMP-PLA heat sink was made by mixing 20~70 wt% carbon nanotube, 20~70 wt% bio-degradable polymer of melt-blended PLA (poly lactic acid) and PBS (poly butylene succinate) and PLA nucleating agents composed of the mixture of soybean oil and biotites, at $150{\sim}220^{\circ}C$ with 1,000~1,500 rpm. Optical and electric characteristics of 7.5 W LED lighting devices using heat sinks with such prepared CMP-PLA were investigated. And, the properties of the heat, which was not released from the CMP-PLA type heat sinks, was also investigated. The color temperature of LED lighting devices using the CMP-PLA heat sinks was 5,956 K, which is x= 0.32 and y= 0.34 in the XY chromaticity, and the color rendering index was 75. The luminous flux and the luminous efficiency of LED lighting devices using the CMP-PLA heat sinks was 540.6 lm and 72.68 lm/W respectively. Measured initial temperature of the heat sinks was $27^{\circ}C$, and their temperature increased as time to be saturated at $52^{\circ}C$ after an hour.

• KIEAE Journal
• /
• v.8 no.6
• /
• pp.21-26
• /
• 2008

According to the tendency of energy efficiency and environment-friendly chracteristics, demend of High-efficiency lighting using LED(Light Emitting Diode)are being increased actively and applied in various fields. However, In order to adequate application of LED light sources, it is necessary to lighting environment and luminous characteristics of LED light sources. This Study aims to characterize the work-plane lighting environment by LED light sources comparing with fluorescent light sources which are widely used. For the sake of this study, a fluorescent light source and 5 LED light sources were introduced and luminance and correlated color temperature were measured to evaluate luminance contrast. The experimental model is Mock-up which is $4.9m{\times}7.2m$ with a height of 2.9m. The test room was set up partition and desks. Luminance and correlated color temperature were measured work-plane on the desk which was set up local lighting by the Radiant Imaging ProMetric 1400. The optical characteristics data of LED can give a lot of advantages to design LED lighting appliances. Hereafter, the object of research will be conducted to evaluate effects of LED light sources on working performance, survey of visual performance, preference and physiology of subjects.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.46-54
• /
• 2005

This study explored how the elementary schools provided proper interior environments to the students in terms of ecological aspects. 14 cases-7 in Busan and 7 in Osaka which were newly built or remodelled since 2000 were selected. These schools were analyzed based on the eco-school guideline suggested In the former study. The guideline categorizes into three parts: 1) energy efficiency related with lighting, ventilation, heating and insulation, 2) greening, 3) sustainability including recycling water system and use of environmentally friendly materials. The results showed that Korean schools require more systematic planning for natural lighting, ventilation, Insulation, greening and new water system while Japanese schools need use of environmentally friendly materials and consideration for natural lighting, insulation and interior greening. Especially, natural lighting and natural ventilation through roof window, atrium, wind tower and use of natural insulation and blind window system should be basically considered at the Initial planning. Also, this study reveals that ecological approach including greening and natural lighting with various architectural form should be applied in future elementary school design to make the school environment more agreeable and economical.