DOI QR코드

DOI QR Code

Characteristics of LED Lighting Device Using Heat Sinks of 7.5 W CMP-PLA

7.5 W CMP-PLA 방열판을 적용한 LED 등기구 특성

  • Received : 2013.10.30
  • Accepted : 2013.11.24
  • Published : 2013.12.01

Abstract

In this paper, the characteristics of a carbon nanotube composite heat sink proposed to replace the advanced Al heat sinks for LED lighting devices were studied. Proposed CMP-PLA heat sink was made by mixing 20~70 wt% carbon nanotube, 20~70 wt% bio-degradable polymer of melt-blended PLA (poly lactic acid) and PBS (poly butylene succinate) and PLA nucleating agents composed of the mixture of soybean oil and biotites, at $150{\sim}220^{\circ}C$ with 1,000~1,500 rpm. Optical and electric characteristics of 7.5 W LED lighting devices using heat sinks with such prepared CMP-PLA were investigated. And, the properties of the heat, which was not released from the CMP-PLA type heat sinks, was also investigated. The color temperature of LED lighting devices using the CMP-PLA heat sinks was 5,956 K, which is x= 0.32 and y= 0.34 in the XY chromaticity, and the color rendering index was 75. The luminous flux and the luminous efficiency of LED lighting devices using the CMP-PLA heat sinks was 540.6 lm and 72.68 lm/W respectively. Measured initial temperature of the heat sinks was $27^{\circ}C$, and their temperature increased as time to be saturated at $52^{\circ}C$ after an hour.

Keywords

References

  1. S. G Jung, D. I. Seok, H. Y. Shin, C. M. Lee, and H. Kim, J. KIIEE, 21, 26 (2007).
  2. M. R. Krames, O. B. Shchekin, R. Mueller-Mach, G. O. Mueller, L. Zhou, G. Harbers, and M. G. Craford, J. Display Technol., 3, 160 (2007). https://doi.org/10.1109/JDT.2007.895339
  3. N, Narendran., Gu,J.P. Freyssinier., H. Yu., and L. Deng, J. Cryst. Growth, 268, 3 (2004).
  4. J. Park, M. W. Shin, and C. C. Lee, Opt. Lett., 29, 2656 (2004). https://doi.org/10.1364/OL.29.002656
  5. J. Hu, L. Yang, W. J. Hwang, and M. W. Shin, J. Cryst. Growth, 288, 157 (2006). https://doi.org/10.1016/j.jcrysgro.2005.12.049
  6. S. H. Han, Y. J. Kim, J. H. Kim, J. Y. Jung, H. C. Kim, and G. S. Cho, J. Korean Vacuum Soc., 21, 164 (2012). https://doi.org/10.5757/JKVS.2012.21.3.164