• Title/Summary/Keyword: Industry clusters

Search Result 307, Processing Time 0.028 seconds

Cluster-based Minimum Interference Channel Assignment for Multi-Radio Multi-Channel Wireless Mesh Networks (멀티 라디오 멀티 채널 무선 메쉬 네트워크를 위한 클러스터 기반 최소 간섭 채널 할당)

  • Cha, Si Ho;Ryu, Min Woo;Cho, Kuk Hyun
    • Journal of Korea Society of Digital Industry and Information Management
    • /
    • v.6 no.3
    • /
    • pp.103-109
    • /
    • 2010
  • Total performance is improved by minimizing the channel interference between links in wireless mesh networks (WMNs). The paper refines on the CB-CA [1] to be suitable for multi-radio multi-channel (MRMC) WMNs. The CB-CA is the cluster-based channel assignment algorithm for one radio three channel WMN based on IEEE 802.11b/g. The CB-CA does not perform the channel scanning and the channel switching between the cluster heads (CHs) and the edge gateway nodes (EGs). However, the use of co-channel for links between CHs and EGs brings the problem of channel interference among many nodes. We propose and evaluate an improved CB-CA algorithm to solve this problem in MRMC WMNs. The proposed algorithm discriminates between transmission channel and receive channel and assigns channels to each interface randomly and advertises this information to neighbor clusters in order to be assigned no-interference channel between clusters. Therefore, the proposed algorithm can minimize the interference between clusters and also improve QoS, since it can use multiple interfaces and multiple channels.

Development of the Products Using Jumchihanji( I ) -Classification and Chemical Components, Pulping of Meogujaengi- (줌치한지를 이용한 제품개발(I) -머구쟁이의 분류와 조성분, 펄프화를 중심으로-)

  • Jeon, Chul
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.35 no.2
    • /
    • pp.58-64
    • /
    • 2003
  • Because of its tendency of making strong Hoc on the fiber surface with fines, Meogujaengi has not been valued as a material of Hanji. As an attempt to manufacture high value-added products using the material made from Jumchihanji, this study performed morphological classification and chemical component analysis and selection of pulping of Meogujaengi method. As a result, it can be concluded as follows, 1. Meogujaengi is assumed to be a local variety of Broussonetia karinoki and its outward appearance is distinguished from Broussonetia kazinoki. 2. The bast fiber of Meogujaengi is longer and thinner than that of Broussonetia papyrifera or Broussonetia kazinoki. However, because of the coarse linear of fiber tissue, there are many clusters. 3. The cluster phenomenon of Meogujaengi is nothing to do with its chemical components. Although the contents of its chemical components are different from those of Broussonetia kazinoki, no component was found that obstructs pulping. 4. The pretreatment for suppressing the occurrence of clusters of Meogujaengi was effective, and it was necessary to do secondary beating using hollander beater after beating mixed with PAM using knife beater.

Development of a Simple Drape Measurement Method for 3D Virtualization (3D 가상화를 위한 드레이프성 간이 측정법 개발)

  • Shin, Bona;Yu, Dongjoo;Lee, Somin;Youn, Seonyoung;Shim, Myounghee;Yun, Changsang
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.45 no.5
    • /
    • pp.881-891
    • /
    • 2021
  • This study proposes a simple drape measurement method for the 3D virtualization of garments. The proposed method uses angles or disks of different diameters to evaluate the drape properties easily. We divided 710 fabrics into ten groups based on the drape coefficient, of which 49.6% had drape coefficients of 30 or less. The drape properties were measured to classify the groups into smaller clusters using the angle formed when the center of the fabric was fixed. Accordingly, three clusters were formed for 60° and 100° angles. A method was devised using ten disks of different diameters to classify the remaining two clusters, except the cluster containing only the D10 group (D1-D5 and D5-D9). Three criteria-grade match, a sum of deviation, and standardization of deviation-were used for the classifications. The discriminative ability between groups was high for D1-D5 with disks with 24.0 and 25.5 cm diameters. Furthermore, a disk with a diameter of 16.5 cm was effective for D5-D9. The three-dimensional drape shapes were unique for the ten groups, which can be utilized as fundamental data for 3D virtualization.

A Study on the Design Policy Reinforcing Korea's design Competitiveness - Focusing on Clusters System in Italia (우리나라의 디자인 경쟁력 강화를 위한 디자인정책 연구 - 이탈리아의 Clusters System을 중심으로)

  • 천정임;변추석
    • Archives of design research
    • /
    • v.15 no.3
    • /
    • pp.191-200
    • /
    • 2002
  • In the 1980s, even though Italy faced economic depression, Italy (she), now, internationally became a strong nation with its best design by national unity and the developmental leap of industry through design. In Italy, especially, small and medium enterprises are accumulated by the same business in each area on the structure of a Cluster system. Italy has some characteristics that being the Italians' elastic way of management, family management and development of a consortium of small and medium enterprises, which have flexibility, imagination and decisiveness. We have to bring these intensified factors of design competitiveness to our country so that we should form the union in order to have a monopoly of specific enterprises based on the specialized technology of small and medium enterprises innovating the structure of a small quantity production having developmental flexibility. We also heighten the sense of designer and publics by achieving social opinion and cult! ural revival. Moreover, the mind of managers has to be changed more aggressively. Finally, the actual policy of design will be established and peformed, and design-company (enterprises) and the industrial economy will generally develop when we activate the structure of the industry centered on small and medium enterprises and design-related association that is united and participates in the establishment of design policy.

  • PDF

A Study on Gamification Consumer Perception Analysis Using Big Data

  • Se-won Jeon;Youn Ju Ahn;Gi-Hwan Ryu
    • International Journal of Advanced Culture Technology
    • /
    • v.11 no.3
    • /
    • pp.332-337
    • /
    • 2023
  • The purpose of the study was to analyze consumers' perceptions of gamification. Based on the analyzed data, we would like to provide data by systematically organizing the concept, game elements, and mechanisms of gamification. Recently, gamification can be easily found around medical care, corporate marketing, and education. This study collected keywords from social media portal sites Naver, Daum, and Google from 2018 to 2023 using TEXTOM, a social media analysis tool. In this study, data were analyzed using text mining, semantic network analysis, and CONCOR analysis methods. Based on the collected data, we looked at the relevance and clusters related to gamification. The clusters were divided into a total of four clusters: 'Awareness of Gamification', 'Gamification Program', 'Future Technology of Gamification', and 'Use of Gamification'. Through social media analysis, we want to investigate and identify consumers' perceptions of gamification use, and check market and consumer perceptions to make up for the shortcomings. Through this, we intend to develop a plan to utilize gamification.

A Study on the Technological Network between Innovative Clusters in Korea - With Special Reference to the Network Analysis of Co-invention - (국내 혁신클러스터의 기술혁신 연계관계 연구 : 공동발명의 네트워크 분석을 중심으로)

  • Park, Hyun-Woo;Yoo, Sun-Hi
    • Journal of Korea Technology Innovation Society
    • /
    • v.10 no.1
    • /
    • pp.98-120
    • /
    • 2007
  • This study analyzed the linkage relations of technological innovation between Daedeok Innopolis and other seven innovative clusters in industrial complexes which have played important roles as innovative centers in Korea. To begin with, we selected major technologies of Daedeok Innopolis for which the linkage with other clusters of innovative activities was analyzed quantitatively and graphically with association matrices, network analysis and dendrogram. Based on this network analysis, we analyzed the technological linkage among clusters and found the direction and strength of technological cooperation of the Daedeok Innopolis with other innovative clusters by technology field. This study analyzed the technological network between the Daedeok Innopolis and other clusters on 6 technology fields in which Daedeok has innovative capabilities. In the analysis was measured the centrality of Daedeok compared with that of other clusters in areas where Daedeok is relatively active in innovative activities. As a result, Daedeok showed the highest centrality with the active innovative activities. Except Daedeok, Banwol-Sihwa cluster showed the highest centrality in all of the 6 technology fields. Putting all the centrality of each innovative cluster and the linkage relations of Daedeok Innopolis together, it need to consider the following policy directions to strengthen the innovative linkage with other clusters. In Daedeok's main technology areas, it needs to increase the regional linkage with the clusters with relatively high centrality and relatively low linkage with Daedeok. For Changwon, Wonju and Gunsan with which Daedeok has the relatively low innovative linkage, it need to examine a new policy to improve the linkage with technologies related with the industry other clusters are nurturing. When Daedeok formulates a plan to cooperate with other clusters, it does not only have to consider the linkage relations of technological innovation analyzed in this study and but also has to examine the cooperative strategies from the comprehensive point of view considering every aspect of their strategic industries, supportive policies, industrial base and competitiveness. This study analyzed the linkage relations between regions based on the network analysis of patents only by co-invention. Consequently, it did not examine the factors inducing the co-invention, which is a limitation of the study and is to be investigated in the future. Also, the exploratory analysis on determinants of linkage intensity and the strategies to get synergy effects through solidified linkage will be the issues of further study.

  • PDF

University Linkages in Technology Clusters of Emerging Economies - Exploratory Case Studies from Cyberjaya, Malaysia - a Greenfield Development and Cyberabad, India - a Brownfield Development

  • Mohan, Avvari V.;Ejnavarzala, Haribabu;Lakshmi, C.N.
    • World Technopolis Review
    • /
    • v.1 no.1
    • /
    • pp.42-55
    • /
    • 2012
  • This paper is concerned with the linkages between universities and industry in the information and communications technology (ICT) in Cyberjaya, Malaysia and Cyberabad, India. In the case of the ICT cluster of Cyberjaya, the context can be termed as greenfield cluster development as the whole project is developed from scratch. In the case of Cyberabad, India, the context can be seen as a brownfield development, where the cluster developed based on existing and new organisations in a region. There is extant literature in research, be it from an Innovation systems or a Triple Helix perspective that has given significant attention to the importance of universities as engines of growth and also about the significance of their linkages with industry innovation in regions. But as argued by scholars like Chaminade et al, most of these papers tend to ignore the specific context in which this interaction between the university and the industry takes place - this study aims to fill this gap through an exploratory study from emerging economies and in a greenfield and brownfield contexts. The findings from the two cases point towards (1) the role of intermediary organisations in developing the linkages, (2) the issue of capabilities of universities for supporting industry development and (3) university-industry linkages are different in greenfield and brown field developments. The paper presents the cases and discusses the findings and provides insights to cluster development officials and policy makers and implications to researchers for developing studies of university-industry from a capabilities and context perspectives.

A Study on the Effects of Industry Types and Business Characteristics on Management Performance: For Japanese Logistics Companies (물류기업의 업종과 사업특성이 경영성과에 미치는 영향에 관한 연구 -일본 물류기업을 대상으로-)

  • Koo, Kyoung-Mo
    • Journal of Korea Port Economic Association
    • /
    • v.34 no.2
    • /
    • pp.51-68
    • /
    • 2018
  • This paper compares the differences in management performance in the logistics market and analyzes the differences in business characteristics depending on the industry types. In addition, the effects of industry types and business characteristics on management performance are examined. The analysis method used is ANOVA and K-means clustering. The implication of the study are as follows. First, in the logistics market in Japan, there was a difference in management performance among the types of industry. The warehousing service type had the highest profitability and stability among all the industry types. Second, differences in business characteristics by industry types were tested. It was found that offshore cargo transportation type was more capital intensive than the other types. In addition, warehousing service type had higher business leadership and credit transaction than others. Third, industry types and clusters based on business characteristics had a significant impact on management performance through interaction effects. For the profitability variables in detail, other clusters had a significant effect between transportation types(onshore and offshore cargo) and warehousing service type. On the other hand, in stability variables, one cluster was effective in all types, which is a characteristic that lowers both capital intensity and business leadership.

Site Selection using Port and Industry Clusters (제조산업의 항만클러스터 입지선정 모형에 관한 연구 - 수도권을 중심으로 -)

  • Gang, Sang-Gon;An, Seung-Beom;Lee, Chung-Hyo
    • Journal of Korea Port Economic Association
    • /
    • v.24 no.4
    • /
    • pp.237-255
    • /
    • 2008
  • This paper aims to clarify if clustering effects among industries exist and if port-industry clustering effects exist. A knock-down approach was used in a survey and 16 industries were categorized. We defined which industry is more competitive in industry clusters and port-industry clusters. Another survey to experts was carried out to identify which industry is more appropriate to one of the three ports in Sudokwon (Seoul Metropolitan Areas): Incheon port, Pyungtaik port and Dangjin port. Five manufacturing industries are selected considering port-industry clustering relationships in this area and Analytic Hierarch Process was used for a pairwise comparison. Locational, social and economic factors are selected for 1st level. A result shows that Incheon port is more competitive in petroleum manufacturing, primary metal manufacturing and rubber and plastic manufacturing and Pyeontaik port is more competitive in metal assembly manufacturing and automobile and trailer manufacturing. However, sensitivity analysis shows a turnover of ranking in some industries. As there exist slight differences among three ports, cooperation is necessary when the government and Port Authorities make plans.

  • PDF

Governance of a Growing Creative Industry Cluster: A Case Study on Brooklyn in the US (창조산업 클러스터의 형성과 발전의 거버넌스에 관한 연구: 미국 뉴욕 브루클린의 문화예술 산업클러스터를 사례로)

  • Shin, Dong-Ho
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.14 no.1
    • /
    • pp.71-85
    • /
    • 2011
  • Many of the old industrial cities in advanced economies have experienced deindustrialization since the 1960s. While some of them have been transforming their economic structures with new economies, such as arts and cultural industries, others have been seriously suffering from economic and social problems. Brooklyn Borough of New York City is one of the best examples which have gone trough rapid de-industrialization; but have been reasonably successful in recovering its economy with arts and cultural industries. This paper introduces the process of developing creative industry clusters, articulates major actors, and find out the governance of the clusters, using three Brooklyn's arts clusters, such as DUMBO, BAM and Williamsburg. Based on the case studies, the paper draws theoretical and policy implications applicable to the Korean circumstance.

  • PDF