• The Journal of Art Theory & Practice
• /
• no.15
• /
• pp.137-165
• /
• 2013

The prefix 'bio' with the meaning of 'life,' has been used for biotechnology, biochemistry, bioengineering, biomedicine, bioethics, bio-information as well as 'bio art' since 1990s. Bio art is an art as life itself and a kind of new direction in contemporary art that manipulates the processes of life. Bio artists use the properties of life and materials as scientists in laboratory of biology, and change organisms within their own species, of invents life with new characteristics. Technologically and socio-culturally, bio art has been connected with bioengineering. This essay is on the bio art that use vegetables, and on the specified gaze of so-called 'Sci-Artists.' Not only the genetically modified vegetables like works of George Gessert, Ackroyd & Harvey, and Eduardo Kac, but also the works made from the critical viewpoint like those of Paul Vanouse, Natalie Jeremijenko, and Amy Youngs, have 'the molecular gaze'(Suzanne Anker and Dorothy Nelkin's concept) of the genetic age in their art works. As the art history have showed, artists' gazes have insights about social problems that surround us. Bioartists' gazes reveal their insights about social and ethical problems, possibly concealed by science itself. Those problems are about results from practical discoveries of the sequencing of the genome, genetic engineering, cloning and reproduction of human and animals, body transformation, and the commercialization of cell and genes etc. We can find the significance of bioart in the molecular gaze about those problems, and we can rethink the identity of human, the reception of social influences from bio-technology and medicine.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.881-884
• /
• 2005

We present a microfabricated three-dimensional (3-D) hybrid biopolymer micro cantilever which can measure the contractile force of cardiomyocytes and analyze the force dependence on different types of surface. To make different conditions of the cell seeding surface, we fabricated the specific type of cantilever which was grooved on the surface. The presented cantilever was facilitated to measure bending of the cantilever and to calculate the contractile force of cardiomyocytes. Also, we demonstrate the dependence of the morphology for the cardiomyocytes seeded on a plain surface and a grooved surface. Finally, we show the dependence of force for the cardiomyocytes on a different surface.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.1
• /
• pp.91-96
• /
• 2012

Objectives: To determine the prevalence of HPV and cervical neoplasia among HIV-infected women in southwestern China. Methods: Cervical cytology, HPV detection by Hybrid Capture-$2^{TM}$ assay, and diagnostic colposcopy were followed by cervical biopsy if indicated. Logistic regression analysis was used to analyze associations between HPV co-infection and cervical intraepithelial neoplasia (CIN), and HIV-related clinical and laboratory parameters. Results: Colposcopic-histopathologically proven CIN2+ lesions were present in 7/83 (8.4%) HIV-infected women. Nearly half (41/83, 43%) were co-infected with carcinogenic HPV genotypes. HPV co-infection was higher in women with colposcopic-histopathologically proven CIN2+ lesions than women with $cells/{\mu}L$ had higher CIN2+ prevalence after adjusting for current ART status and age (adjusted OR: 6.3, 95% CI: 1.1, 36.5). Conclusions: HIV/AIDS care and treatment programs should integrate effective cervical cancer prevention services to mitigate the risk of invasive cervical cancer among HIV-infected women in China.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.12
• /
• pp.793-799
• /
• 2016

In a hybrid fuel cell system, low-temperature reforming technology, which uses waste heat as a heat source, is applied to improve system efficiency. A low temperature reformer is required to optimize geometry in low thermal conditions so that the reformer can achieve the proper methane conversion rate. This study analyzed internal temperature distributions and the reaction patterns of a reformer by considering the change of the shape factor on the limited heat supply condition. Unlike the case of a high temperature reformer, analysis showed that the reaction of a low temperature reformer takes place primarily in the high temperature region of the reactor exit. In addition, it was confirmed that the efficiency can be improved by reducing the GHSV (gas hourly space velocity) or increasing the heat transfer area in the radial direction. Through reacting characteristic analysis, according to change of the aspect ratio, it was confirmed that a low temperature reformer can improve the efficiency by increasing the heat transfer in the radial direction, rather than in the longitudinal direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.152-152
• /
• 2016

We studied the effect of the silver grid size on graphene transparent conducting films for flexible organic solar cells (OSCs). The silver grid was used an assistant layer of the graphene to reduce the sheet resistance of substrates. Silver grid with various graphene sizes for optimizing transmittance and sheet resistance of substrates were fabricated on polyethylene terephthalate (PET) substrates to form the hybrid films. The optimized grid geometry on the single layer graphene (SLG) was the grid dimension $200{\mu}m{\times}200{\mu}m{\times}50nm{\times}2{\mu}m$ (length ${\times}$ width ${\times}$ height ${\times}$ linewidth), where the sheet resistance was $55.73{\Omega}/square$ with the average transmittance of ~ 92.83 % at 550 nm. The properties of the OSCs fabricated using SLG with optimized silver grids on PET substrates show a short circuit current of $10.9mA/cm^2$, an open circuit voltage of 0.58 V, a fill factor of 60.8 %, and a power conversion efficiency (PCE) of 3.9 %. The PCE was improved about 91% than that of the OSCs using the SLG without the silver grid. These results demonstrate that the optimized grid geometry to the based on the graphene transparent electrodes contribute to improving the performance of OSCs.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.56-56
• /
• 2003

For the treatment of superficial tumors like squamous cell carcinoma of the head and neck, 6 MV photon beam is not appropriate and a spoiler is widely used to increase dose in the buildup region, while preserving the skin sparing effect. However, commercially available treatment planning systems assume a normal unspoiled beam, thereby cannot predict the buildup dose with spoiler accurately. We aimed to implement a Monte Carlo (MC) based planning system to apply it to the radiation treatment of head and neck. Lucite with thickness of 10-mm was used for the beam spoiler with Siemens Primus 6 MV photon beam. BEAM/DOSXYZ MC system was employed to model the linac and the spoiler. To verify the calculation accuracy of MC simulations, the percent depth doses (PDDs) and profiles with and without spoiler were measured using a parallel-plate chamber. For the MC based planning, we adopted a hybrid interface system between Pinnacle (Philips, USA) and BEAM/DOSXYZ to support treatment parameters of Siemens linac and the spoiler. The measurements of PDDs and profiles agreed with the corresponding MC simulations within 2% (lSD), which demonstrate the reliability of our MC simulations. The spoiler generated electrons make a contribution to the absorbed dose up to depth of 2cm, which shows that the dominant source of increased dose from spoiler system is the contaminating electrons created by the spoiler. The whole procedures necessary for MC based treatment planning were performed seamlessly between Pinnacle and BEAM/DOSXYZ system. This ability helps to increase the clinical efficiency of the spoiler technique. In conclusion, we implemented a MC based treatment planning system for a 6 MV photon beam with a spoiler. We demonstrate sophisticated MC technique makes it possible to predict dose distributions around buildup region accurately.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.1
• /
• pp.1-9
• /
• 1996

Many signal-processing techniques have been found to be useful in ultrasonic and nondestructive evaluation. Among the most popular techniques are signal averaging, spatial compounding, matched filters and homomorphic processing. One of the significant new process is split-spectrum processing(SSP), which can be equally useful in signal-to-noise ratio(SNR) improvement and grain characterization in several specimens. The purpose of this paper is to explore the utility of SSP in ultrasonic NDE. A wide variety of engineering problems are reviewed, and suggestions for implementation of the technique are provided. SSP uses the frequency-dependent response of the interfering coherent noise produced by unresolvable scatters in the resolution range cell of a transducer. It is implemented by splitting the frequency spectrum of the received signal by using gaussian bandpass filter. The theoretical basis for the potential of SSP for grain characterization in SUS 304 material is discussed, and some experimental evidence for the feasibility of the approach is presented. Results of SNR enhancement in signals obtained from real four samples of SUS 304. The influence of various processing parameters on the performance of the processing technique is also discussed. The minimization algorithm, which provides an excellent SNR enhancement when used either in conjunction with other SSP algorithms like polarity-check or by itself, is also presented.

• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.161-168
• /
• 1986

A 1.95Kb Sau3Al fragment coding for $\alpha$-amylase from Bacillus amyloliquefaciens was isolated by the shotgun method using Escherichia coli as a host. The genome of Bacillus amyloliquefaciens was partially digested with the restriction endonuclease Sau3Al and joined to plasmid YRp7 cleaved with the restriction endonuclease BamHI. The $\alpha$-amylase gene present in a 1.95Kb insert was stably maintained and expressed in Escherichia coli. The amount of $\alpha$-amylase activity produced by Escherichia coli containing the hybrid plasmid pEA24 was about 65% of the activity produced by the donor Bacillus amyloliquefaciens strain. The properties of $\alpha$-amylase produced by Escherichia coli were very similar to those produced by Bacillus amyloliquefaciens as based on optimum temperature, pH, and effect of CaCl$_2$ concentration. About 70% of the $\alpha$-amylase produced by Escherichia coli was localized in the periplasmic space, whereas the remaining enzyme was localized in the inner part of the cell.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.757-764
• /
• 2017

As the reduction of greenhouse gases(GHGs) emission has become a global issue, the microgrid markets are growing rapidly. With the sudden changes in the market, Korean government suggested a new business model called 'Self-Sufficient Energy Islands'. Its main concern is a stand-alone microgrid composed of Distributed Energy Resources(DERs) such as Renewable Energy Sources(RESs), Energy Storage System(ESS) and Fuel Cell, in order to minimize the emission of GHGs. According to these trend, this paper is written to propose an optimal sizing method of DERs in a stand-alone microgrid by using Genetic Algorithm(GA), one of the representative stochastic methods. It is to minimize the net present cost with the variables, size of RESs and ESS. In the process for optimization, the sunless days are considered as additional constraints. Through the case study analysis, the size of DERs installed in a microgrid system has been computed using the proposed method in MATLAB. And the result of MATLAB is compared with that of HOMER(Hybrid Optimization of Multiple Energy Resources), a well-known energy modeling software.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.24-28
• /
• 2006

Electrochemical hydrogenation/dehydrogenation properties were studied for a single particle of a Mm-based(Mm : misch metal) hydrogen storage alloy($MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3}$) for the anode of Ni-MH batteries. A carbon fiber microelectrode was manipulated to make electrical contact with an alloy particle, and the cyclic voltammetry and the galvanostatic charge/discharge experiments were performed. A single particle of the alloy showed the discharge capacity of 280[mAh/g], the value being 90[%] of the theoretical capacity. Data were compared with that of the composite film consisting of the alloy particles and a polymer binder, which is more practical form for Ni-MH batteries. Additionally, pulverization of the alloy particles are directly observed. Compared with the conventional composite film electrodes, the single particle measurements using the microelectrode gave more detailed, true information about the hydrogen storage alloy.