• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.88-95
• /
• 2011

An embedded mobile device mostly has lower computation power than a general purpose computer because of its relatively lower system specifications. Consequently, conventional face tracking and face detection methods, requiring complex algorithms for higher recognition rates, are unsuitable in a mobile environment aiming for real time detection. On the other hand, by applying a real-time tracking and detecting algorithm, we would be able to provide a two-way interactive multimedia service between an user and a mobile device thus providing a far better quality of service in comparison to a one-way service. Therefore it is necessary to develop a real-time face and eye tracking technique optimized to a mobile environment. For this reason, in this paper, we proposes a method of tracking horizontal face position of a user on a T-DMB device for enhancing the quality of 3D DMB content. The proposed method uses the orientation of edges to estimate the left and right boundary of the face, and by the color edge information, the horizontal position and size of face is determined finally to decide the horizontal face. The sobel gradient vector is projected vertically and candidates of face boundaries are selected, and we proposed a smoothing method and a peak-detection method for the precise decision. Because general face detection algorithms use multi-scale feature vectors, the detection time is too long on a mobile environment. However the proposed algorithm which uses the single-scale detection method can detect the face more faster than conventional face detection methods.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.199-202
• /
• 2003

In the research for Unmaned Air Vehicles(UAVs), the use of Vision-sensor has been increased. It is possible to calculate the position information of air vehicle by finding a horizontal line. In this paper, we proposed a vision-based algorithm for finding the horizontal line. Experimental results show that the proposed algorithm is faster than an existing algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.570-576
• /
• 2010

This paper can be used for GPS air navigation study on integrity monitoring algorithm as, the projected horizontal plane using GPS pseudorange residuals for fault detection satellites were suspected. Failure to remove the detected suspicious satellite, compare with threshold which is calculated using satellite deployment (PDOP) and determine whether the failure is presented. The theory that horizontal projection of the satellite failure residuals greater than residual of normal satellite is proved mathematically. Comparison with horizontal projection residuals are likely to malfunction in the satellite were presented. To evaluate the proposed algorithm, bias fault insert into GPS pseudorange, and compare with conventional parity space method about fault detection and isolation capability.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.21-27
• /
• 2018

Wearing degree and uneven wearing detection algorithm using horizontal edge information is proposed in this paper. The noise in the input image is removed by bilateral filter, and then edges are extracted from the filtered image by using the proposed mask. As the tire is worn, grooves of tire shoulder or sipes are changed more than the vertical grooves. Therefore the edges from grooves of tire shoulder or sipes have more information about the tire wearing than the edges from vertical grooves. Proposed mask that is reflected this feature is used to extract the horizontal edges. After edge extraction, the edge image is represented in two-level system. The edge pixels of the binarization image are used to decide the wearing degree and uneven wearing. This proposed method can be used easily without any other equipments. The proposed method is conducted with a real vehicle, and the experimental results show the good performance of the proposed method in detecting wearing degree and uneven wearing.

• Geomechanics and Engineering
• /
• v.39 no.1
• /
• pp.105-113
• /
• 2024

Recently, electrical resistivity surveys have been used to obtain information related to underground structures including burial structure type and depth. However, various field conditions hinder understanding measured electrical resistance, and thus there is a need to understand how various geometries affect electrical resistance. This study explores the effect of geometric parameters of a structure and electrodes on electrical resistance in the framework of the finite element method. First, an electrical resistance module is developed using the generalized mesh modeling technique, and the accuracy of the module is verified by comparing the results with the analytical solution for a cylindrical electrode with conical tip. Then, 387 cases of numerical analysis including geometric parameters of a buried structure and electrodes are conducted to quantitatively estimate the detection depth under a steady-state current condition. The results show that electrical resistance is increased as (1) shallower burial depth of structure, (2) closer distance between ground electrode and structure, (3) longer horizontal electrode distance. In addition, the maximum detection depth corresponding to converged electrical resistance is deeper as (4) closer distance between ground electrode and structure, (5) shorter horizontal electrode distance. The distribution of the electric potential around the electrodes and underground structure is analyzed to provide a better understanding of the measured electrical resistance. As engineering purpose, the empirical equation is proposed to calculate maximum detection depth as first approximation.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.35-47
• /
• 2010

To complement inaccurate edge information and detect correctly the boundary of a vehicle in an image, an extended edge analysis technique is presented in this paper. The vehicle is detected using the bottom boundary generated by a vehicle and the road surface and the left and right side boundaries of the vehicle. The proposed extended edge analysis method extracts the horizontal edge by merging or dividing the nearby edges inside the region of interest set beforehand because various noises deteriorates the horizontal edge which can be a bottom boundary. The horizontal edge is considered as the bottom boundary and the vertical edges as the side boundaries of a vehicle if the extracted horizontal edge intersects with two vertical edges which satisfy the vehicle width condition at the height of the horizontal edge. This proposed algorithm is more efficient than the other existing methods when the road surface is complex. It is proved by the experiments executed on the roads having various backgrounds.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.4
• /
• pp.494-499
• /
• 2012

In this paper, a new method for detecting various objects that can be risks to safety navigation in sea environment is proposed. By analysing Infrared(IR) images obtained from various sea environments, we could find out that object regions include both horizontal and vertical direction edges while background regions of sea surface mainly include vertical direction edges. Therefore, we present an approach to detecting object regions considering horizontal and vertical edges. To this end, in the first step, image enhancement is performed by suppressing noises such as sea glint and complex clutters using a statistical filter. In the second step, a horizontal edge map and a vertical edge map are generated by 1-D Discrete Cosine Transform technique. Then, a combined map integrating the horizontal and the vertical edge maps is generated. In the third step, candidate object regions are detected by a adaptive thresholding method. Finally, exact object regions are extracted by eliminating background and clutter regions based on morphological operation.

• Journal of Applied Biological Chemistry
• /
• v.44 no.2
• /
• pp.92-94
• /
• 2001

A simple protocol for the detection of opines, cucumopines and mikimopines using a general horizontal or vertical get electrophoresis system for protein or DNA separation in the laboratory are demonstrated. This electrophoresis method can also be applied to other opines as long as correct detection reagent and buffer system are used.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.3
• /
• pp.272-281
• /
• 2013

Traffic Collision Avoidance System (TCAS) is designed to enhance safety in aircraft operations, by reducing the incidences of mid-air collision between aircraft. The current version of TCAS provides only vertical resolution advisory to the pilots, if an aircraft's collision with another is predicted to be imminent, while efforts to include horizontal resolution advisory have been made, as well. This paper introduces a collision resolution algorithm, which includes both vertical and horizontal avoidance maneuvers of aircraft. Also, the paper compares between the performance of the proposed algorithm and that of algorithms with only vertical or horizontal avoidance maneuver of aircraft.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1519-1527
• /
• 2020

AGeneral radiation measuring devices have been developed in the form of spatial dose rate detection devices that measure dose rates to radioactive contaminant and 2D or 3D imaging devices for radioactive contamination information. Each of these radiation detection techniques has advantages. The advantages of both detection devices are necessary to minimize personal injury and rapid decontamination in the area of a radioactive accident. In this paper, we proposed a technique that can measure the dose rate and direction information about the radioactive pollutant source in real time using a detection sensor, a rotating body, and a directional shield for radioactive pollutant detection. The rotational-based detection device is configured to check the dose rate and direction using the location information of the rotator and measurement value. We proposed a measurement technique for vertical and horizontal directions through multiple holes. It was confirmed that the measurement error for direction information was less than 1% when detected in the horizontal direction.