• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.633-644
• /
• 2008

The structural framework design uses high-strength bolts and welding in column splices. However, for the column under high compression, the number of the required high-strength bolts can be excessive and the increase of welding results in difficulty of quality inspection, the transformation of the structural steels, and the increase of erection time. According to the AISC criteria, when columns have bearing plates, or they are finished to bear at splices, there shall be sufficient connections to hold all parts securely in place. The Korean standard sets the maximum 25% of the load as criteria. Using direct contact makes it possible to transfer all compressive force through it. The objective of this study is to examine the generally applied stress path mechanism of welded or bolted columns and to verify the bending moment and compression transfer mechanism of the column splice according to metal touch precision. For this study,22 specimens of various geometric shapes were constructed according to the change in the variables for each column splice type, which includes the splice method, gap width, gap axis, presence or absence of splice material, and connector type. The results show that the application of each splice can be improved through the examination of the stress path mechanism upon metal contact. Moreover, the revision of the relative local code on direct contact needs to be reviewed properly for the economics and efficiency of the splices.

• Journal of Biomedical Engineering Research
• /
• v.34 no.4
• /
• pp.170-176
• /
• 2013

Lymphedema is a phenomenon in which fluid is accumulated inside tissues due to the damaged lymphatic systems. Lymphedema can cause complications such as lymphangitis, infection, changes in skin texture, fibrosis, and lymphangiosarcoma. In this study, a lymphedema screening system based on the elasticity of the skin is proposed to easily quantify lymphedema. The developed probe consists of touch sensors, a load cell and hall-effect sensors to measure the indentation force on the skin and the return time of the skin. The developed system can be used to estimate the change in the elasticity of the skin to quantify lymphedema. The system was tested with a thyroid phantom and gelatin phantoms of different concentrations and the resulting force and the time were recorded. It was found that the increase in the elasticity leads to a higher indentation force and shorter return time. This shows that the developed system can monitor the change in the skin elasticity by measuring the return time and the indentation force. The feasibility of the system in clinical applications will be evaluated in the future study.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.400-410
• /
• 2019

In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge-Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.2
• /
• pp.121-127
• /
• 2015

A reduction of motor performance due to brain disorders can be screened by evaluating force tracking capabilities (FTCs). Existing studies have examined FTCs mainly using simple sinusoidal waves, of which repeated profiles have a critical limitation due to a learning effect in force tracking. The present study examined the effects of personal factors (age and gender) and sinusoidal wave factors (central force and complexity) on FTCs of healthy adults using composite sinusoidal wave profiles (CSWPs). FTCs were measured using Finger $Touch^{TM}$ for 30 seconds and quantified in terms of time within the target range (TWR, accuracy measure) and relative RMSE (RRMSE, variability measure). A total of 90 healthy adults in 20s to 70s with the equal gender ratio participated in the experiment consisting of combinations of 2 central force levels (6 N and 10 N) and 2 complexity levels (approximate entropy, ApEn = 0.03 and 0.06) of CSWPs. Significantly decreased FTCs (lower TWR and higher RRMSE) were found in aged adults, females, the low central force, and the high complexity. The detailed FTC decrements include a 43% reduced TWR and a 85% increased RRMSE of older adults in 70s as compared to those in 20s, a 17% reduced TWR and a 17% increased RRMSE of female as compared to those of male, a 30% reduced TWR and a 108% increased RRMSE at central force = 6N when compared to those at central force = 10N, and a 19% reduced TWR and a 30% increased RRMSE at ApEn = 0.06 as compared to those at ApEn = 0.03. The characteristics of FTCs for CSWPs can be of use in establishing an assessment protocol of motor performance for screening brain disorders.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.8
• /
• pp.743-748
• /
• 2015

This paper reports the enhanced fabrication and characterization of a $3{\times}3$ array tactile actuator composed of cellulose acetate. The array tactile actuator, with dimensions of $15{\times}15{\times}1mm^3$, consists of 9 pillar-supported cells made from a cellulose-acetate molding. The fabrication process and performance test along with the results for the suggested actuator are explained. To improve the cell-array fabrication, a laser cut was adopted after the molding process. The displacement of the unit cell increased the input voltage and frequency. Various top masses are added onto the actuator to mimic the touch force, and the acceleration of the actuator is measured under actuation. When 2 kV is applied to the actuator, the maximum acceleration is 0.64 g, which is above the vibrotactile threshold. The actuation mechanism is associated with the electrostatic force between the top and bottom electrodes.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.394-406
• /
• 2015

In this work, an efficient aircraft landing simulation strategy is proposed to develop an efficient and reliable hard-landing monitoring procedure. Landing stage is the most dangerous moment during operation cycle of aircraft and it may cause structural damage when hard-landing occurs. Therefore, the occurrence of hard-landing should be reported accurately to guarantee the structural integrity of aircraft. In order to accurately determine whether hard-landing occurs or not from given landing conditions, full nonlinear structural dynamic simulation can be performed, but this approach is highly time-consuming. Thus, a more efficient approach for aircraft landing simulation which uses a hierarchical aircraft landing model and an extended inertia relief technique is proposed. The proposed aircraft landing model is composed of a multi-body dynamics model equipped with landing gear and tire models to extract the impact force and inertia force at touch-down and a linear dynamic structural model with an extended inertia relief method to analyze the structural response subject to the prescribed rigid body motion and the forces extracted from the multi-body dynamics model. The numerical examples show the efficiency and practical advantages of the proposed landing model as an essential component of aircraft hard-landing monitoring procedure.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.227-235
• /
• 2016

Heavy-weight high speed underwater vehicle(HSUV) is launched from the submerged mother ship. For the safety point of view, it is important to confirm whether the HSUV would touch the launching mother ship. In this paper, the hydrodynamic force and moment were modeled by the polynomials of motion variables and the simple lift and drag acting on a plate and cylinder which consist of the HSUV's several parts. The mother ship was assumed as the Rankine half body to consider the flow field near the moving ship. Such hydrodynamic force and moment were included in the 6 DOF equations of motion of the HSUV and the dynamic simulations for the various conditions of the HSUV until the propeller activation were performed. Developed simulation program is expected to reduce the number of expensive sea trial test to develop safety logic of the HSUV at the initial firing stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.30-37
• /
• 1999

This paper represents the development of the brake system for the inline skate using bellows. The inline skate that is used at present has defects due to frequent impulse, which weakens the breaking force by damaging the parts. Therefore to solve these problems a break system for the inline skates using hydraulics is suggested. To solve the oil leakage problems, bellows is used. Also to prevent the breaks from not touching the ground when skating the bellows is placed at the heel, high as possible. To obtain fast response speed, the ratio of inner diameter of the bellows is changed so that with only a small displacement from the bellows the rubber pad attached to the bellows will touch the ground fast. The performance of the break system using bellows depends on the optimal design of the bellows. Therefore the parameters that changes the form of the bellows are tested and also the interaction between the forces are investigated. The performance of new model brake system with bellows and old model system with only a rubber pad without bellows was estimated through observation of braking posture.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.21-29
• /
• 2016

In this paper, we developed a flexible transparent capacitive pressure sensor which can recognize X and Y coordinates and the size of force simultaneously by sensing a change in electrical capacitance. The flexible transparent capacitive pressure sensor was composed of 3 layers which were top electrode, pressure sensing layer, and bottom electrode. Silver nanowire(Ag NW)/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) hybrid film was used for top and bottom flexible transparent electrode. The fabricated capacitive pressure sensor had a total size of 5 inch, and was composed of 11 driving line and 19 sensing line channels. The electrical, optical properties of the Ag NW/PEDOT:PSS and capacitive pressure sensor were investigated respectively. The mechanical flexibility was also investigated by bending tests. Ag NW/PEDOT:PSS exhibited the sheet resistance of $44.1{\Omega}/square$, transmittance of 91.1%, and haze of 1.35%. Notably, the Ag NW/PEDOT:PSS hybrid electrode had a constant resistance change within a bending radius of 3 mm. The bending fatigue tests showed that the Ag NW/PEDOT:PSS could withstand 200,000 bending cycles which indicated the superior flexibility and durability of the hybrid electrode. The flexible transparent capacitive pressure sensor showed the transmittance of 84.1%, and haze of 3.56%. When the capacitive pressure sensor was pressed with the multiple 2 mm-diameter tips, it can well detect the force depending on the applied pressure. This indicated that the capacitive pressure sensor is a promising scheme for next generation flexible transparent touch screens which can provide multi-tasking capabilities through simultaneous multi-touch and multi-force sensing.

• Journal of Korean Library and Information Science Society
• /
• v.20
• /
• pp.187-216
• /
• 1993

The overall goal of this study is to identify what I'||'&'||'R is, and what services should be offered as legitimate I'||'&'||'R actives. The gist of the study is as follows: 1. The shift of the clients targeted to receive the services from disadvantageous to every person. 2. Ambiguity in I'||'&'||'R definition. Because it is hard to distinguish I'||'&'||'R service from the traditional reference service, and shifting of clients, the establishment of the definition was very difficult. Instead of a definite answer, the criteria for "I'||'&'||'R Providers" was drawn. 3. Most provided services were simple and complex information giving based on resource file. Constructing resource file is a major component of I'||'&'||'R service. 4. From 1980s, many I'||'&'||'R providing libraries adapted computer a n.0, pplications. 5. Social work and library-internship was advised to conduct a cooperative project by NCLIS, I'||'&'||'R Task Force. 6. In the high technological era, there continue to be many people who need the su n.0, pportive relationship. I'||'&'||'R is to optimize both the service and clients. Librarian must learn from the principle of high tech/high touch.