A Development of Brake System for Inline Skate using Bellows

벨로우즈를 이용한 인라인스케이트의 브레이크 시스템 개발

This paper represents the development of the brake system for the inline skate using bellows. The inline skate that is used at present has defects due to frequent impulse, which weakens the breaking force by damaging the parts. Therefore to solve these problems a break system for the inline skates using hydraulics is suggested. To solve the oil leakage problems, bellows is used. Also to prevent the breaks from not touching the ground when skating the bellows is placed at the heel, high as possible. To obtain fast response speed, the ratio of inner diameter of the bellows is changed so that with only a small displacement from the bellows the rubber pad attached to the bellows will touch the ground fast. The performance of the break system using bellows depends on the optimal design of the bellows. Therefore the parameters that changes the form of the bellows are tested and also the interaction between the forces are investigated. The performance of new model brake system with bellows and old model system with only a rubber pad without bellows was estimated through observation of braking posture.