Local Buckling Analysis of the Punch in stamping Die and Its Design Modification

타발금형펀치의 국부 좌굴해석 및 설계변경

  • 김용연 (삼성항공산엄(주) 정밀기기연구소, LF Unit) ;
  • 이동훈 (삼성항공산엄(주) 정밀기기연구소, LF Unit)
  • Published : 1999.03.01

Abstract

The lead frame manufactured by press stamping process, is an important part of semiconductor. The recent technical trend of semiconductor, chip sized and high performance package technology, requires the lead frame to be of more multi-leads and of fine ILP (Inner Lead Pitch). As the ILP is getting finer, its corresponding punch of the stamping die is getting narrower. The punch narrower than its stamping limit has been broken due to local buckling. This paper analyzed the phenomena of punch breakdown. Moreover, the punch design was modified to increase the critical limit of buckling force. This paper, also, suggested new design rules of the punch, which asks the modification of its lead frame design that has to be considered in the stage of semiconductor package design. The new design rules of lead frame design yields a good reliability of semiconductor package as well as a good quality of lead frame.

Keywords