• 한국강구조학회 논문집
• /
• 제20권5호
• /
• pp.633-644
• /
• 2008

철골구조물의 기둥이음 형식은 볼트연결이나 용접을 이용한다. 이러한 연결방법에서 부재의 축응력은 덧판의 볼트체결이나, 용접부위 를 통하여 그 응력이 전달되는 것으로 간주하여 설계, 시공되고 있다. 우리나라의 강구조 한계상태 설계기준에 따르면, 기둥 이음부의 고력볼트 및 용접이음은 이음부의 응력을 충분히 전달하여야 하고 이들 항복내력은 피접합재 항복내력의 1/2이상이 되도록 하여야 한다. 다만, 이음부에서 단면 에 인장응력이 없는 경우, 이음면이 절삭 마감으로 밀착되면 소요압축력 및 소요휨모멘트 각각의 1/4은 접촉면에 의해 직접 전달시킬 수 있다고 되 어있다. 반면에, 미국 철강협회설계기준(AISC Specifications and Codes)에서는 기둥이음에서 지압력에 따라 응력이 전달되도록 접촉면이 마무리 되어 있는 경우, 그 위치를 확보하는데 충분하도록 이음되어야 한다고만 되어있어, 설계자의 판단에 따라 압축력은 이음면의 직접접촉(Metal Touch)으로 상부에서 하부로 모두 전달할 수 있도록 되어있고, 또한 압축력과 휨모멘트를 받는 기둥에서는 직접접촉을 통해 최소 25%에서 최대 50%까지의 하중전달이 가능하다. 따라서 기둥이음에서 압축력에 대한 직접접촉의 활용도의 차이가 크고 또한 압축력과 모멘트가 작용할 때의 직접 접촉에 대한 활용도도 그 차이가 최대 25%이므로, 직접 접촉된 이음부의 응력전달 거동에 대한 연구가 필요하다. 본 연구는 축력과 휨모멘트가 작 용하는 기둥에 대해서 이루어지며 실험체의 수는 총 22개이다. 국내의 메탈터치의 평활도인 관리 허용치 1.5D/1000와 한계허용치 2.5D/1000및 AISC에서 제시하는 압축력을 받는 기둥에서의 보강 없는 틈의 한계인 1.6mm에 대해, 본 실험결과와 기존의 허용치를 비교하였다. 그 결과, 상하 부재 간의 직접 접촉을 통하여, 즉 메탈터치를 이용하여 응력을 전달시키면 부재 이음에서 경제성과 효율성이 개선될 수 있다고 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제34권4호
• /
• pp.170-176
• /
• 2013

Lymphedema is a phenomenon in which fluid is accumulated inside tissues due to the damaged lymphatic systems. Lymphedema can cause complications such as lymphangitis, infection, changes in skin texture, fibrosis, and lymphangiosarcoma. In this study, a lymphedema screening system based on the elasticity of the skin is proposed to easily quantify lymphedema. The developed probe consists of touch sensors, a load cell and hall-effect sensors to measure the indentation force on the skin and the return time of the skin. The developed system can be used to estimate the change in the elasticity of the skin to quantify lymphedema. The system was tested with a thyroid phantom and gelatin phantoms of different concentrations and the resulting force and the time were recorded. It was found that the increase in the elasticity leads to a higher indentation force and shorter return time. This shows that the developed system can monitor the change in the skin elasticity by measuring the return time and the indentation force. The feasibility of the system in clinical applications will be evaluated in the future study.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.400-410
• /
• 2019

In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge-Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.

• 대한산업공학회지
• /
• 제41권2호
• /
• pp.121-127
• /
• 2015

A reduction of motor performance due to brain disorders can be screened by evaluating force tracking capabilities (FTCs). Existing studies have examined FTCs mainly using simple sinusoidal waves, of which repeated profiles have a critical limitation due to a learning effect in force tracking. The present study examined the effects of personal factors (age and gender) and sinusoidal wave factors (central force and complexity) on FTCs of healthy adults using composite sinusoidal wave profiles (CSWPs). FTCs were measured using Finger $Touch^{TM}$ for 30 seconds and quantified in terms of time within the target range (TWR, accuracy measure) and relative RMSE (RRMSE, variability measure). A total of 90 healthy adults in 20s to 70s with the equal gender ratio participated in the experiment consisting of combinations of 2 central force levels (6 N and 10 N) and 2 complexity levels (approximate entropy, ApEn = 0.03 and 0.06) of CSWPs. Significantly decreased FTCs (lower TWR and higher RRMSE) were found in aged adults, females, the low central force, and the high complexity. The detailed FTC decrements include a 43% reduced TWR and a 85% increased RRMSE of older adults in 70s as compared to those in 20s, a 17% reduced TWR and a 17% increased RRMSE of female as compared to those of male, a 30% reduced TWR and a 108% increased RRMSE at central force = 6N when compared to those at central force = 10N, and a 19% reduced TWR and a 30% increased RRMSE at ApEn = 0.06 as compared to those at ApEn = 0.03. The characteristics of FTCs for CSWPs can be of use in establishing an assessment protocol of motor performance for screening brain disorders.

• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.743-748
• /
• 2015

This paper reports the enhanced fabrication and characterization of a $3{\times}3$ array tactile actuator composed of cellulose acetate. The array tactile actuator, with dimensions of $15{\times}15{\times}1mm^3$, consists of 9 pillar-supported cells made from a cellulose-acetate molding. The fabrication process and performance test along with the results for the suggested actuator are explained. To improve the cell-array fabrication, a laser cut was adopted after the molding process. The displacement of the unit cell increased the input voltage and frequency. Various top masses are added onto the actuator to mimic the touch force, and the acceleration of the actuator is measured under actuation. When 2 kV is applied to the actuator, the maximum acceleration is 0.64 g, which is above the vibrotactile threshold. The actuation mechanism is associated with the electrostatic force between the top and bottom electrodes.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.394-406
• /
• 2015

In this work, an efficient aircraft landing simulation strategy is proposed to develop an efficient and reliable hard-landing monitoring procedure. Landing stage is the most dangerous moment during operation cycle of aircraft and it may cause structural damage when hard-landing occurs. Therefore, the occurrence of hard-landing should be reported accurately to guarantee the structural integrity of aircraft. In order to accurately determine whether hard-landing occurs or not from given landing conditions, full nonlinear structural dynamic simulation can be performed, but this approach is highly time-consuming. Thus, a more efficient approach for aircraft landing simulation which uses a hierarchical aircraft landing model and an extended inertia relief technique is proposed. The proposed aircraft landing model is composed of a multi-body dynamics model equipped with landing gear and tire models to extract the impact force and inertia force at touch-down and a linear dynamic structural model with an extended inertia relief method to analyze the structural response subject to the prescribed rigid body motion and the forces extracted from the multi-body dynamics model. The numerical examples show the efficiency and practical advantages of the proposed landing model as an essential component of aircraft hard-landing monitoring procedure.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.227-235
• /
• 2016

Heavy-weight high speed underwater vehicle(HSUV) is launched from the submerged mother ship. For the safety point of view, it is important to confirm whether the HSUV would touch the launching mother ship. In this paper, the hydrodynamic force and moment were modeled by the polynomials of motion variables and the simple lift and drag acting on a plate and cylinder which consist of the HSUV's several parts. The mother ship was assumed as the Rankine half body to consider the flow field near the moving ship. Such hydrodynamic force and moment were included in the 6 DOF equations of motion of the HSUV and the dynamic simulations for the various conditions of the HSUV until the propeller activation were performed. Developed simulation program is expected to reduce the number of expensive sea trial test to develop safety logic of the HSUV at the initial firing stage.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.30-37
• /
• 1999

This paper represents the development of the brake system for the inline skate using bellows. The inline skate that is used at present has defects due to frequent impulse, which weakens the breaking force by damaging the parts. Therefore to solve these problems a break system for the inline skates using hydraulics is suggested. To solve the oil leakage problems, bellows is used. Also to prevent the breaks from not touching the ground when skating the bellows is placed at the heel, high as possible. To obtain fast response speed, the ratio of inner diameter of the bellows is changed so that with only a small displacement from the bellows the rubber pad attached to the bellows will touch the ground fast. The performance of the break system using bellows depends on the optimal design of the bellows. Therefore the parameters that changes the form of the bellows are tested and also the interaction between the forces are investigated. The performance of new model brake system with bellows and old model system with only a rubber pad without bellows was estimated through observation of braking posture.

• 마이크로전자및패키징학회지
• /
• 제23권3호
• /
• pp.21-29
• /
• 2016

본 연구에서는 유연하고 투명한 특성을 지닌 유연 투명 정전용량형 압력 센서를 제안하여 기존의 X, Y 좌표 위치 인식이 가능할 뿐만 아니라 3차원 인식이 가능한 터치스크린을 제작하였다. 유연 투명 정전용량형 압력 센서는 상부 기판, 압력 감지층, 하부 기판의 3 중 구조로 구성되어 있다. 은나노와이어 전도성고분자 하이브리드 필름이 상부 및 하부 기판으로 사용되었다. 유연 투명 정전용량형 압력 센서의 터치 면적은 5인치이며, 전기적 신호를 인가하기 위한 11개의 driving line과 정전용량의 변화를 감지하기 위한 19개의 sensing line으로 구성되었다. 은나노와이어 전도성고분자 하이브리드 필름 및 유연 투명 정전용량형 압력 센서의 전기적, 광학적 특성을 평가하였다. 또한 기계적 유연성을 평가하기 위하여 굽힘 시험을 수행하였다. 제작된 은나노와이어 전도성고분자 하이브리드 필름은 평균 투과율 91.1%, 평균 탁도 1.35%로서 매우 우수한 광학 특성을 나타내었고, 평균 면저항은 $44.1{\Omega}/square$이었다. 굽힘 시험 결과 은나노와이어 전도성고분자 필름은 곡률 반경 3 mm까지 저항의 변화가 거의 없어 매우 우수한 유연성을 갖고 있음을 알 수 있었다. 또한 200,000회의 반복 굽힘 피로 시험 결과, 저항의 증가는 매우 미미하여, 유연 내구성이 매우 우수함을 알 수 있었다. 유연 투명 정전용량형 압력 센서의 평균 투과율은 84.1%, 탁도는 3.56%이었다. 또한, 직경 2 mm의 팁으로 눌렀을 경우, 누르는 압력에 따라 센서가 잘 작동함을 알 수 있었으며, 이를 통하여 멀티 터치 및 멀티 포스 터치가 가능함을 확인하였다. 본 연구에서 제작한 유연 투명 정전용량형 압력 센서는 유저인터페이스, 사용자 경험이 강조되고 있는 현재 상황에서 새로운 인터페이스의 터치스크린 패널에 대한 발전 가능성을 제시할 수 있을 것이라 판단된다.

• 한국도서관정보학회지
• /
• 제20권
• /
• pp.187-216
• /
• 1993

The overall goal of this study is to identify what I'||'&'||'R is, and what services should be offered as legitimate I'||'&'||'R actives. The gist of the study is as follows: 1. The shift of the clients targeted to receive the services from disadvantageous to every person. 2. Ambiguity in I'||'&'||'R definition. Because it is hard to distinguish I'||'&'||'R service from the traditional reference service, and shifting of clients, the establishment of the definition was very difficult. Instead of a definite answer, the criteria for "I'||'&'||'R Providers" was drawn. 3. Most provided services were simple and complex information giving based on resource file. Constructing resource file is a major component of I'||'&'||'R service. 4. From 1980s, many I'||'&'||'R providing libraries adapted computer a n.0, pplications. 5. Social work and library-internship was advised to conduct a cooperative project by NCLIS, I'||'&'||'R Task Force. 6. In the high technological era, there continue to be many people who need the su n.0, pportive relationship. I'||'&'||'R is to optimize both the service and clients. Librarian must learn from the principle of high tech/high touch.