• New & Renewable Energy
• /
• v.2 no.3
• /
• pp.15-22
• /
• 2006

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new market penetration using the distributed generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection standards. KEPCO, a government company in Korea, has performed the project to identify and evaluate the performance of Micro Gas Turbine(MGT) technologies focused on 30, 60kW-class grid-connected optimization and combined Heat & Power performance. This paper describes the results for the mechanical, electrical, and environmental tests of MGT on actual grid-connection under Korean regulations. As one of the achievements, the simulation model of Exhaust-gas Absorption Chiller was developed, so that it will be able to analyze or propose new distributed generation system using MGT. In addition, KEPCO carried out the field testing of the MGT Cogeneration system at the R&D Center Building, KEPCO. The field test was conducted in order to respond to a wide variety of needs for heat recovery and utilization. The suggested method and experience for the evaluation of the distributed generation will be used for the introduction of other distributed generation technologies into the grid in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.793-803
• /
• 1997

Open networking architecture is required to support new multimedia services as integrated functions of network management and service architecture. In this paper, we propose the methodology of building block modeling using object grouping concepts and the sharing scheme of different distributed processing environments based on open networking architecture. The building block has the functions of object management, security object instance registry and object mapping in object group. It is necessary for the connection management information to be shared on the interworking between two domains. We implemented and validated connection management functions using computational object modeling and building block modeling in different distributed processing environments.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.197-201
• /
• 2003

We study in this paper both distributed power control and removal algorithms for multimedia CDMA wireless networks. In our study, users can have different data rates as well as different quality of service (QoS) requirements. We derive a necessary and sufficient condition for the fully distributed power control (FDPC) algorithm to find a feasible power set. We also prove that, if the maximal power level is used at the start, then the distributed constrained power control (DCPC) algorithm is equivalent to the FDPC algorithm. For the connection removal algorithm, we prove that the non-reinitialized removal algorithm finds a feasible power set faster and employs smaller power levels than the reinitialized one does. Performances of some connection removal criteria are also studied. Our simulation results reveal that the smallest normalized CIR (SNC) and largest CIR requirement (LCR) criteria result in smaller outage probability than the smallest CIR (SC) criterion in a multimedia environment.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.289-302
• /
• 1999

As the size and complexity of network increase Distributed System Management (DSM) will be significant issue within information network in order to increase the high reliability and to improve the flexibility of network management. The OSI management model has several problems. The key problems are that it does not fully address the problem of how to develop communication protocol in support of DSM and how to classify the management connection criteria. In this paper to solve first problem described above this paper propose the connectionless CMIP to accomplish for effectively managing the distributed management managing systems to handle the dynamic informations. To work out second problem we introduce the connection criteria in the hierarchy of management system and finally evaluate the efficiency of a suggested protocol during cooperative negotiation among the managing system.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

The introduction of GSMP open interface to OBS network can materialize to separate the transport plane and the control plane in OBS network. This makes the implementation of OBS switches simple and provides various flexibility. However, the introduction of open interface will cause the connection setup delay because of the additional processing overhead of open interface protocol. Also, in GSMP based network, the location of network management functions are not defined explicitly and the research result about the OBS network management is almost nothing. This paper proposes a parallel connection setup mechanism using centralized connection control server to minimize connection setup delay in OBS network with GSMP open interface and defines managed objects to support connection, configuration, performance, and fault management for the management of OBS network with GSMP open interface. This paper also proposes a distributed network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verify the possibility of OBS control and network management by implementing network management function using proposed parallel connection setup mechanism and distributed network management model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.356-372
• /
• 2004

Statement of problom: In the internal connection system the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. Purpose: The purpose of this study was to assess the loading distributing characteristics of 3 implant systems with internal connection under vertical and inclined loading using finite element analysis. Material and method: Three finite element models were designed according to the type of internal connection of ITI(model 1), Friadent(model 2), and Bicon(model 3) respectively. This study simulated loads of 200N in a vertical direction (A), a $15^{\circ}$ inward inclined direction (B), and a $30^{\circ}$ outward inclined direction (C). Result: The following results have been made based on this numeric simulations. 1. The greatest stress showed in the loading condition C of the inclined load with outside point from the centric cusp tip. 2. Without regard to the loading condition, the magnitudes of the stresses taken at the supporting bone, the implant fixture, and the abutment were greater in the order of model 2, model 1, and model 3. 3. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture, and lower stress was taken at the cancellous bone. 4. The stress of the implant fixture was usually widely distributed along the inner surface of the implant fixture contacting the abutment post. 5. The stress distribution pattern of the abutment showed that the great stress was usually concentrated at the neck of the abutment and the abutment post, and the stress was also distributed toward the lower part of the abutment post in case of the loading condition B, C of the inclined load. 6. In case of the loading condition B, C of the inclined load, the maximum von Misess stress at the whole was taken at the implant fixture both in the model 1 and model 2, and at the abutment in the model 3. 7. The stress was inclined to be distributed from abutment post to fixture in case of the internal connection system. Conclusion: The internal connection system of the implant and the abutment connection methods, the stress-induced pattern at the supporting bone, the implant fixture, and the abutment according to the abutment connection form had differenence among them, and the stress distribution pattern usually had a widely distributed tendency along the inner surface of the implant fixture contacting the a butment post.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.585-588
• /
• 2007

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection constrains. KEPCO (Korea Electric Power Corporation) is performing the project to develope the Distributed Micro Gas Turbine (MGT) technolgies by using Swine BIO-ENERGY. This paper describes the plans and strategies for the renewable energy of MGT on actual grid-connection under Korean situations. KEPCO also, has a research plan on bio-gas pretreatment system applicable to our domestic swine renewable resources and is performing concept design of pilot plant to test grid operation. In addition, this testing will be conducted in order to respond to a wide variety of needs for application and economic evaluation in the field of On-site generation.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.252-254
• /
• 1998

유선에서 이용하는 능력으로 무선으로도멀티미디어 서비스를 이용하고자 연구된덧이 무선 ATM이다. 무선 ATM에서 핸드오프는 망 레벨과 무선 A레벨의 무선 핸드오프로 구분할 수 있다. 망 레벨의 핸드오프에서 CX의 선택은 빠르고 매끄러운 핸드오프를 지원해 주는데 중요한 역할을 한다. 망 관리에는 하나의 연결서버가 망의 연결관리를 해주는 중앙 집중 연결관리(Centralized Connection Management Scheme)와 각노드에서 연결을 관리하는 분산된 연결관리(Distributed Connection Management Scheme)로 나뉜다. 여기서 문제점은 중앙집중 연결관리에서는 전달지연시간(Propagation delay), 분산된, 연결관리에서는 시스템 오버헤드가 발생한다는 것이다. 이러한 중앙집중 연결관리의 지연시간과 분산된 연결관리의 오버헤드를 감소시키기 Distributed 위해 탐색알고리즘을 제안한다.

• Journal of Korea Game Society
• /
• v.1 no.1
• /
• pp.31-36
• /
• 2001

Generally, the internet online game systems are divided into two parts, clients and servers. The clients provide a connection with game server to each user and communicate between them. And, the server controls all clients by the game rules fairly and manages database systems to maintain the user information. In this paper, we propose a configuration method for internet online game servers using distributed scheme. To apply this method, we divide game server into three sub-level parts again. First part of game server is login server to establish the connection between communication server and clients. Second part is communication server to connect between clients and main game server during playing the game. And last part is DBMS that performs database independently. Our proposed scheme suggests that the game server operates very stable because of decreasing of processing load by distributed scheme. So, our proposed server configuration applies to similar online game easily.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.163-175
• /
• 1999

As the size and complexity of network increase, Distributed Systems Management (DSM) will be significant issue within information network in order to increase the high reliability and to improve the flexibility of network management. The OSI management model has several problems. The key problems are that it does not fully address the problems of how to develop communication protocol in support of DSM, and how to classify the management connection criteria. In this paper, to solve first problem described above, this paper propose the connectionless CMIP(Common Management Information Protocol) to accomplish for effectively managing the distributed management system, and indicate its efficiency; this protocol is available to negotiate among the managing systems, handle the dynamic information. To work out second problem, we introduce the connection criteria in the hierarchy of management systems, and finally evaluate the efficiency of a suggested protocol during cooperative negotiation among the managing systems.