• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.36-43
• /
• 2004

본 논문은 건축물에 적용할 수 있는 자연채광 시스템으로서 채광부 반사판과 방광부의 위치 및 크기 등을 개선한 수평형 채광덕트를 개발하고자 하였으며, 이에 따른 실물모형 실험을 통하여 채광성능을 분석하고 적용가능성을 검증하고자 하였다. 연구결과 채광덕트의 적용시 청천공 상태에서는 실내 안쪽에서 0.3∼0.4％의 조도비가 측정되었다. 또한 덕트 폭보다 150[cm] 이상 넓은 조도분포를 가지는 것으로 나타났으며, 채광성능이 높아 실제 건물에 적용할 경우 주간시간대에서 조명에너지 절약 가능성이 높은 것으로 판단되었다.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.93-100
• /
• 2005

Character and illuminance distribution of daylighting is very important for the architectural plan in museum. Those data show bases for exhibition space design with daylighting and play a decisive role in visual perception of articles and space aesthetic. The goal of this paper was therefore to analyze the illuminance distribution in fine art museum with 3 typical girdle skylight types which are devided according to the art of protection from glare. This Experiment proved that they had a striking contrast with regard to the ratio of daylight illumination and illuminance distribution in spite of the same purpose of those development. The girdle skylight with a translucent glass showed the strongest value of the ratio of daylight illumination, but inequable illuminance distribution in space, excepting the area of the wall. However, the latticed reflector of light refracted daylight in the direction of wall and made illuminance distribution very equable in whole space. The ratio of daylight illumination at the girdle skylight which was located at the verge of the ceiling, was highest at the upper part of the wall and was reduced gradually from there, by way of the middle and under part of the wall, to the center of space.

• 태양에너지
• /
• 제13권2_3호
• /
• pp.12-21
• /
• 1993

건축물 내에서 자연채광을 적절하게 활용하기 위하여는, 건축가는 건물의 외피를 주광을 건물 안으로 들여보내는 필터로 활용할 수 있어야 한다. 여기서는 건물에서 활용할 수 있는 자연채광 방식을 측창, 천창, 아트리움으로 나누어서 각각의 개념과 적용상의 유의점에 대하여 설명하였다. 건물에 적합한 자연채광의 개념은 건물에 필요한 자연채광의 양, 특징, 방향성과 이에 의한 대비 효과를 분석하여 결정하여야 한다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.155-160
• /
• 2008

Recently, curtainwall is built according to expand residential-commercial complex and high-raised buildings in residential buildings. It is that curtainwall has advantage to provide for the building occupants a connection between indoor spaces and the outdoors through the introduction of daylight and views into the regularly occupied areas of the building. These buildings also make a result increasing the amount used energy in domestic residence. Therefore, Aims of this study is to suggest advanced design through analysis of daylight, energy and envelope elements in GBCC and glazing simulation depended on case studies.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.167-172
• /
• 2005

This study based on the experimental data on the daylight responsive dimming systems performance. The purpose of this study increases the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing incident daylight. The photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, by received a proper dimming signal from DCU. Generally it is effective to control artificial lighting with the different control ratio of each row by setting a photosensor as same numbers and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. By analyzing the data of this performance and finding regular ration between photosensors. we will execute different dimming ratios to each row of artificial lighting by a single photosensor.

• 신재생에너지
• /
• 제19권3호
• /
• pp.13-21
• /
• 2023

Smart windows are capable of varying their visible light transmittance (VLT) in response to changing environmental conditions. The VLT variability of architectural windows is highly valuable because it enables indoor lighting and energy environments to align with external changes. However, challenges such as high installation costs and assurance of glass visibility have prompted the exploration of alternative solutions, including models incorporating partially applied smart windows., Prior research focused on useful daylight illuminance (UDI) analysis for south-facing office buildings, pointing out suitable areas for smart-window implementation to enhance lighting control. In this study, we broadened this scope by determining optimal smart-window application zones under changing building orientation. Furthermore, we studied the correlation between building orientation and smart-window deployment areas.

• 한국디지털건축인테리어학회논문집
• /
• 제5권2호
• /
• pp.9-14
• /
• 2005

The analysis system has been needed to pre-evaluate and analyze the right for sunlight and the right for view in a residential environment since the urban high density and high rise residentinal building types have been prevailing these days. The purpose of this study is to propose an digital analysis method to evaluate sunlight and view conditions in a residential environment to improve the system performance in the sense of speed and accuracy. The digital analysis method using the object-oriented 3D CAD system and parametric library is studied and applied in the system and the various outputs of the analysis system makes possible to modify the design with the speed and accuracy as a result of the analysis. The study includes the evaluation for a daylight and view condition of each unit, and the interruption degree to a vicinity environment in terms of sunlight and view conditions comparing before and after construction.

• 한국주거학회논문집
• /
• 제23권1호
• /
• pp.27-41
• /
• 2012

The objective of this study is to develop the blind control strategy and method which reduce negative effect of incoming daylight on visual comfort of occupants, minimize psychological anxieties caused by frequent motions of a blind, and maximize positive effect of incoming daylight and solar irradiation by opening/closing of a blind. As previous researches on blind controls have limited outdoor environmental conditions to those in specific regions, orientations and dates, these resulted in problems at various conditions for general-purpose application. Major problem is that the time interval and amount of blind movement do not meet the control objective at the end of control zone and discontinuous curve. To overcome these limitations revealed in the previous researches, following tasks were performed in this study. 1) To establish the control objective to accomplish the goal of this study. 2) To develop the control methods and algorithms which prevent glare on the work-plane at any time and which control the time interval and amount of blind movement to follow the control objective at various profile angle curves. 3) To validate the general-purpose applicability and performance of the developed control methods and algorithms by simulation and its data analysis at various conditions. It was found that the proposed methods and algorithms can prevent the direct glare on the work-plane at all the time and also increase the incoming daylight and solar irradiation.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.55-64
• /
• 2010

The study has conducted a research on the main shape of domestic multi-family residential buildings. The four arrangements were selected after the research and each of them was analyzed for daylight, view and natural ventilation according to the different pitch of buildings. Based on the results from the analysis, the optimum pitch of buildings for each of the arrangements are as follows. With looking at the outcomes from the analysis on changes in residential environment by the pitch of building buildings in the four arrangements, it was figured out that it would be the best if the distance is more than 1.0H for Case_1. For Case_2, it should be more than 0.9H and for Case_3, it has to be 1.0H or more. Last but not least, it seems to be superb if the distance is more than 0.9H for Case_4.

• 설비공학논문집
• /
• 제19권7호
• /
• pp.491-499
• /
• 2007

An architectural means of optimal daylight distribution is by using so-called light shelf systems, horizontal shading and redirecting devices. The overall performance of the daylighting system can be improved by the incorporation with electric lighting control devices. This paper aims to exemplify the benefit of daylighting in term of economic consideration. In such a case a reasonable technique to compare system costs is by life-cycle costing. Stated simply, a life-cycle cost represents the total cost of a system over its entire life cycle, that is, the sum of first cost and all future costs. Four different electric lighting system designs are proposed and a lighting control system that is continuously operating according to the level of daylight in the space has been adapted. The result shows clearly that although denser layout of lighting fixtures might be more effective to interface to the level of daylight ceaselessly changeable, its economic benefit may not meet the expected criterion the reason of increased initial investment and maintenance cost for the fixtures and control devices.