• Title/Summary/Keyword: Construction Condition

Search Result 3,663, Processing Time 0.028 seconds

The research of the Technology Development of the Test Equipment of the Rolling Stocks (철도차량 검수 시험설비에 관한 기술개발 연구)

  • Song Moon-Shuk;Kim Moon-Ki
    • Proceedings of the KSR Conference
    • /
    • 2005.05a
    • /
    • pp.97-102
    • /
    • 2005
  • As the railroad-base is an important factor to maintenance the rolling stocks, it is essential to improve the current problems of the environment pollution, nose, vibration, welfare, work condition and to applicate the performance betterment cases to the new base construction and pre-base maintenance. When the new base construction and pre-base maintenance is proceeded, it is necessary to construct the optimized system which includes the user's opinions enough to prevent the waste of the budget ,in that some part of the budget is spent to improve convenience, work condition, and the fault of base system after the construction. Therefore, this research intends to present the problem of the pre-constructed facilities, the testing operators' opinions, the analysis and the investigation of facilities' improvement, thorough the indication of provisions and the analysis of the result of the survey of testing operators.

  • PDF

Detemination of Tower Skeleton Diagram for KEPCO 765kV Transmission Lines (765kv 송전용 철탑 Skeleton Diagram 결정)

  • Park, K.H.;Kim, Y.W.;Won, B.J.
    • Proceedings of the KIEE Conference
    • /
    • 1997.07e
    • /
    • pp.1804-1806
    • /
    • 1997
  • Route conditions, applied voltage and the condition of stringing conductors should be considered in determining standard types and skeleton diagrams of towers. In skeleton diagrams the necessary number of insulators and the air clearance have been decided by the results of studies on insulation coordination. Galloping, sleet-jumping, sag characteristics and the possibility of closeness of conductors should be considered according to the condition of stringing conductor and the span. After reviewing those factors, it is necessary to determine the minimum vertical and horizontal distance for the safety of transmission lines under any circumstances. Also it should be economical.

  • PDF

The Study on the New Traditional Korean-style house condition & Improvement Direction for Jeonnam region Rural Houses -Focus of Yeongam-gun & Yeosu region- (전남지역 신축 농촌한옥 현황 및 개선방향에 관한 연구 -영암군 및 여수 지역을 중심으로-)

  • Jo, Yeon-Jun;Jo, Giran
    • Journal of the Korean Institute of Rural Architecture
    • /
    • v.12 no.4
    • /
    • pp.45-52
    • /
    • 2010
  • The study has effected checking the traditional Korean-style house condition in Farm village and the resident preference test in jeonnam area for examination propriety of development a traditional Korean-style house. Also, it was checked over the problem and improvement direction of new building the Korean style house. The resident wanted living in the traditional Korean-style house if it is compromised problem of living equipment and cost of building. First. Jeonnam area Korean style house must keep the 'ㅡ' type plan. Second, the plan must construct compact and effective plan with the main floored room as the center for prevention against an indiscreet plan space extend of outside. Third, it has must need suitable material and construction for applying traditional exterior with effect. Fourth, it has must need actualization plan for the cost of construction is 3,500,000/py for construction.

Comparison of Temperature History of Concrete with the Combination of the Various Surface Curing Sheets at Hot Weather Condition (표면 양생시트 조합에 의한 서중콘크리트 표면온도 이력 비교)

  • Lee, Ju-Suck;Kim, Jong-Back;Kim, Jong;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2006.11a
    • /
    • pp.87-90
    • /
    • 2006
  • This study investigates the temperature history of slab mock-up specimens for hot weather concreting applying various surface insulating methods, in order to improve concrete quality at hot weather condition. Test showed that the use of insulating blanket or a bubble sheet on upper section of slab prevented from abrupt increase of temperature and vaporization of moisture during early curing at hot weather circumstance. In addition, it secured higher strength at early age. Therefore it is concluded that concrete construction insulating with the bubble sheet will reduce the plastic and drying shrinkage as well as improve strength at early age, thus securing concrete duality.

  • PDF

A Study on the field application analysis for high adhesive spray type of degenerated and rubberized asphalt membrane material (스프레이식 고점착 변성 고무 아스팔트 도막 방수재의 재료 및 공법에 관한 실험적 연구)

  • Oh, Sang-Keun;Song, Je-Young;Kim, Jin-Seong;Lee, Nam-Kyoo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2006.11a
    • /
    • pp.61-65
    • /
    • 2006
  • Urethane, epoxy, acrylic have common property to adhere on the concrete dried surface in the waterproofing materials at present. In the wet condition, however, the materials such as urethane, epoxy, acrylic need a long hardening time and it become a reason of water leakage as the materials breaking down. it is one of the problem to adhere to the substrate. Therefore, in this thesis, I focused to assure the structural safety and durability and quality for waterproofing and safe of construction cost by cut down the cost of labor and reduce the term of works as searching the application of field condition for hish adhesive spray type of degenerated and rubberized asphalt membrane material.

  • PDF

Earth Pressure of a Reinforced Retaining Wall During Construction (보강토의 시공중 토압변화)

  • 노한성;최영철
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2001.06a
    • /
    • pp.13-19
    • /
    • 2001
  • The use of reinforced soil have been increased due to it's cost effectiveness, flexibility and so on. In this study, a full-scale reinforced soil with rigid facing were constructed to investigate the soil pressure variation of reinforcing system. The results of soil pressure during backfill construction are described. The influence of facing stiffness on soil pressure is addressed. The results show that lateral earth pressures on the wall are active state during backfill. It is obtained that the lateral soil pressure highly depends on the installation condition of pressure cell and construction condition. Long-term measurement will be followed to verify the design assumptions with respect to the distribution of lateral stress on the facing.

  • PDF

The Analysis of Field Condition for Power Receiving System and Patch and Panel Boards at Construction Sites (건설현장의 수전설비 및 배.분전반의 현장실태 분석)

  • Gil, Hyoung-Jun;Han, Woon-Ki;Kim, Hyang-Kon;Choi, Chung-Seog
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2004.05a
    • /
    • pp.335-340
    • /
    • 2004
  • To analyze risk factors of temporary power installations, the investigation was carried out for power receiving system and pack and panel boards at construction sites. The subject was variable such as an airport, an apartment, a municipal playground. There are many risk factors caused by inadequate working environments and the deterioration of temporary power installations using equipment with minimum safety devices at construction sites. There, it is intended to present problems and preventive measures against electrical shock accidents, through analyzing risk factors of real field condition and investigating temporary power installations all over the country.

  • PDF

Development of a method to measure musculoskeletal load for construction workers (건설노무자의 근골격계 부담작업 측정 방안 개발)

  • Kim, Kyoon-Tai;Kim, Chang-Han
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2011.05b
    • /
    • pp.73-75
    • /
    • 2011
  • Unlike other craft workers, construction craft workers perform their work under diverse working conditions, which means that their working pattern and postures continuously change. While construction craft workers are vulnerable to musculoskeletal disorders, due to the unique factors of their working conditions, their actual condition has not yet been accurately investigated. For this reason, this research aims to develop a method of measuring the musculoskeletal load of construction workers by reviewing various motion measuring methods to which state-of-the-art sensors are applied. This research is expected to serve as the basis for developing a system to measure the musculoskeletal load of construction workers.

  • PDF

Preliminary study on effectiveness of business improvement applying the method of process management for small construction company (지역중소건설업체의 프로세스관리를 통한 업무개선효과에 대한 기초연구)

  • Kim, Ki-Deok;Lim, Hyung-Cheol
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2012.05a
    • /
    • pp.315-316
    • /
    • 2012
  • The construction industry in the local areas business as the archetypal local one is effectuating industrial production, create employment and so on to perform a significant part in keeping local economy also reviving sluggish economy. The construction stagnation in market may cause severe economic depression in local which leads to having a crippling impact on local constructive industry, in terms of the phenomenon is on the interrelation between the local construction industry and local economy, with regard to local economy which is not covered by firm based industries is wield strong influenced over by construction industry. The object of this study is to research possible improvement factors on the preferential basis by only companies' efforts, therefore the policy of government or local self-governing body in support may be unnecessarily involved after grasping faced practical problems at regional construction companies from analysing the present condition of local construction marketplace and companies.

  • PDF

Working Posture Analysis Using OWAS method of Core Wall Construction in High-rise Building (OWAS기법을 활용한 초고층 코어월 공사의 근로자 작업자세 분석)

  • Lee, Junehyuck;Kim, Taehoon;Cho, Hunhee;Kang, Kyung-In
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2016.05a
    • /
    • pp.72-73
    • /
    • 2016
  • Working Posture is an important factor directly connected with quality and productivity of the construction project. In particular, High-rise building construction is required to manage the working posture due to the repetitive task and unfavorable working condition such as high place work, limited space. However existing construction planning of high-rise building construction has a negative effect on the labor's productivity because it is not insufficiently considered for working posture. Therefore the purpose of this study is to suggest a work that needs improvement by analyzing labor's working posture quantitatively using OWAS method. These results would provide the basic information to improve the productivity of the construction project by supporting the construction plan considering the working posture in high-rise building.

  • PDF