• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.75-82
• /
• 2017

본 연구에서는 지중 매설관의 새로운 세정공법으로 개발된 카본 다이옥사이드 펠릿을 이용한 분사 세정공법의 현장 적용성을 검토하였다. 이를 위해 우선적으로 미국 철강도금도장위원회에서 제안하고 있는 관 세정 전후에 관한 시방내용들을 조사하고 이를 기초로 하여 본 공법의 금속표면 처리기준을 선정하였으며 임의의 녹이 슨 관을 대상으로 카본 다이옥사이드 분사세정의 현장시험을 수행하고 세정도가 선정기준에 부합되는지를 검토하였다. 또한, 모양을 달리한 2가지의 노즐시스템이 적용되어 분사압에 따른 세정효과가 분석되었으며 각 노즐시스템에 대해서 최종 충격량 계측시험을 수행하여 공기압 대비 최종 분사압의 압력손실을 검토하였다. 연구결과, 제안된 공법은 미국철강도금위원회에서 규정하고 있는 수준을 상회하는 세정효과가 있음을 확인하였으며 노즐 비교실험으로부터 세정효과가 우수한 노즐도 선정되었다. 이로부터 카본 다이옥사이드 펠릿을 이용한 관 세정공은 완전탈락수준에 이르는 관 세정효과를 기대할 수 있을 뿐만 아니라 냉각제로의 이용 등에 국한되는 이산화탄소 재활용 부분의 활성화에 크게 기여할 수 있을 것으로 판단된다.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.923-930
• /
• 2016

상 하수도, 해양플랜트 등 다양한 배관이 산업현장에 이용되고 있으며, 이러한 배관의 유지보수 작업은 필수적이다. 특히 산업현장에서 배관 유지보수 작업은 전문 인력이 배관 내 투입되어 작업이 진행되거나, 인력 투입이 불가능한 경우 와이어에 연결된 스크래퍼를 배관에 삽입하는 방식을 이용한다. 그러나 이 방식은 교통체증, 막대한 예산의 투입 등의 문제를 야기한다. 이런 문제점을 해결하기 위한 배관 청소 로봇의 연구, 개발이 진행되고 있다. 현재 배관청소 로봇은 작업 및 운용 상태를 실시간으로 확인할 수 없는 문제점이 있다. 본 논문에서는 배관 청소로봇의 운용, 배관 내부 및 청소 상태를 확인할 수 있도록 카메라로부터 촬영된 영상을 수집하며, 수집된 데이터는 RS-485 통신을 이용하여 모니터링 시스템에 전송하여 사용자가 실시간으로 상태를 확인할 수 있게 구성하였다.

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.141-160
• /
• 2015

This study aims to investigate the impacts of chemical cleaning on the performance of a reverse osmosis membrane. Chemicals used for simulating membrane cleaning include a surfactant (sodium dodecyl sulfate, SDS), a chelating agent (ethylenediaminetetraacetic acid, EDTA), and two proprietary cleaning formulations namely MC3 and MC11. The impact of sequential exposure to multiple membrane cleaning solutions was also examined. Water permeability and the rejection of boron and sodium were investigated under various water fluxes, temperatures and feedwater pH. Changes in the membrane performance were systematically explained based on the changes in the charge density, hydrophobicity and chemical structure of the membrane surface. The experimental results show that membrane cleaning can significantly alter the hydrophobicity and water permeability of the membrane; however, its impacts on the rejections of boron and sodium are marginal. Although the presence of surfactant or chelating agent may cause decreases in the rejection, solution pH is the key factor responsible for the loss of membrane separation and changes in the surface properties. The impact of solution pH on the water permeability can be reversed by applying a subsequent cleaning with the opposite pH condition. Nevertheless, the impacts of solution pH on boron and sodium rejections are irreversible in most cases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.927-928
• /
• 2008

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.13-19
• /
• 2008

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.69-73
• /
• 2006

This paper present the optimal cleaning condition of the out-hull preprocessing robot by Taguchi method in design of experiments. A $L_8(2^4)$ orthogonal array is adopted to study the effect of adjustment parameters. The adjustment parameters consist of robot speed, motor torque, motor speed and tool angle. And the quality feature is selected as surface roughness of sheet metal. Taguchi analysis is performed in order to evaluate the effect of adjustment parameters of the quality feature of cleaning process by $Minitab^{(R)}$.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.569-572
• /
• 2003

In this study, we evaluated the dilute HF cleaning to reduce residual defects made by metal CMP process. The purpose of this test is to observe the existence of barrier metal damage during DHF cleaning on condition that it should not affect metal thin film reliability, so we will get rid of slurry residual particles as a main defect of the metal CMP process for the better yield. In-line defect data showed us that slurry residual particles were removed by DHF application. The HF rinse significantly reduced metal contamination levels and surface roughness. The best effect by additional oxide loss was discovered when Dilute HF condition is 10".

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.215-222
• /
• 2013

The purpose of this study is to minimize fading fabrics of surgical gown by repeated severe laundering and sterilization condition. The study showed that the best conditions were reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions. In these conditions, color difference values(dE) were below 1.0 that means unrecognizable color change by repeated laundering and sterilization. If it treated with only laundering, reduction cleaning conditions may adjust over $80^{\circ}C$ alkaline solution. In conclusion, it is needed to select the high-washing fastness dye and reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions for removal unfixed dyes.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.111-117
• /
• 1996

Many alternatives to Trichlorothane & Trichlorotrifluoroethane mainly used as cleaning solvent for industrial parts are developed and commercialized because the solvent is scheduled to phaseout after 1996. Considering there are many kinds of parts and contaminants in all parts cleaning, It is essential to investigating the characteristics and performance of the alternatives prior to use. For the contaminant of a standard oil, waters, hydrocarbon and halogen parts which are the comercially available and promising alternatives were experimented at the same condition of Trichlorothane & Trichlorotrifluoroethane to check the cleaning performance. Overally, the removal efficiency of halogen solvent parts was better than that of hydrocarbon or waters parts for removing the standard oil used in this experiment.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.474-480
• /
• 2012

Diagnostic tests were performed on two high voltage(HV) motor stator windings. These tests included the measurement of insulation resistance, polarization index, AC current, dissipation factor($tan{\delta}$) and partial discharge(PD) magnitude. Surface contamination of HV motor stator windings has an effect on the AC current and $tan{\delta}$. When the stator windings were finished cleaning and insulation reinforcement, the increase rate of AC current(${\Delta}I$) and dissipation factor(${\Delta}tan{\delta}$) were very small compared to those before cleaning. However, the PD magnitude remained the same. These tests show that cleaning and insulation reinforcement of HV motor stator windings can reduce the insulation failure.