• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.707-713
• /
• 2024

This paper analyzes the current status of identity verification and authentication procedures when issuing and using alternative means for resident registration numbers and suggests measures to improve the problems. Users unconsciously use identity verification services by responding to identity verification requests from Internet service providers (ISPs). Ultimately, online service users are providing excessive amounts of personal information, and ISPs are charging fees for identity verification services, ultimately increasing online service costs. Therefore, this paper analyzes the current status of identity verification and authentication procedures for users when issuing and using alternative means for resident registration numbers and suggests measures to improve the problems.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.264-270
• /
• 2018

In recent years, It is required to verify software reliability according to DO-178, which announced by radio technical commission for aeronautics (RTCA) and recognized by the Federal Aviation Administration (FAA), for civil aircraft developed or intended to fly in the United States or Europe. This is because the reliance on software in each field is deepening, and the efforts for improvement of software reliability have been made first in civil aviation field where economic and social impacts are catastrophic in the event of an accident. In this paper, we have identified some issues to be considered for requirements-based reliability verification required by DO-178 to improve software reliability and present the major elements of the present weapon system acquisition procedure of DAPA for each stage. In addition, we analyzed the results of applying the identified main check factors to a domestic aircraft development project based on the information accumulated in overseas aircraft development projects. As a result, we have shown that it is possible to verify requirements-based software reliability according to DO-178 by adding key checkpoints to the current weapon system acquisition procedure and providing objective inspection criteria.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.123-134
• /
• 2021

This study was conducted for the purpose of convergence exploration of evidence-based practices for the advancement of performance analysis of the extracurricular activities at Duksung Women's University. The research method consisted of an expert meeting procedure along with a procedure for analyzing previous studies dealing with the performance analysis of the university's extracurricular activities in the field of pedagogy. The contents of this study consisted of presenting some facts that should be based on evidence for the advancement of performance analysis of the extracurricular activities after the establishment of the center for extracurricular activities in Duksung Women's University. And in practices, the development and diagnostic analysis of tools for diagnosing extracurricular customized learning capabilities, data-based multidimensional analysis (IR system), continuous monitoring analysis through extracurricular certification, and analysis based on feedback tools were presented in a convergence perspective and context. As a result of the study, the evidence-based practices for the advancement of the performance analysis of the extracurricular activities at Duksung Women's University guarantees the validity and stability of the performance evaluation and feedback system of the extracurricular activities at Duksung Women's University, and has a close influence on the extracurricular education work of other universities analyzed as possible.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1108-1119
• /
• 2018

As the interest on the air pollution is gradually rising at home and abroad, automotive and fuel researchers have been studied on the exhaust and greenhouse gas emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward two main issues : exhaust emissions (regulated and non-regulated emissions, PM particle matter) and greenhouse gases of vehicle. Exhaust emissions and greenhouse gases of automotive had many problem such as the cause of ambient pollution, health effects. In order to reduce these emissions, many countries are regulating new exhaust gas test modes. Worldwide harmonized light-duty vehicle test procedure (WLTP) for emission certification has been developed in WP.29 forum in UNECE since 2007. This test procedure was applied to domestic light duty diesel vehicles at the same time as Europe. The air pollutant emissions from light-duty vehicles are regulated by the weight per distance, which the driving cycles can affect the results. Exhaust emissions of vehicle varies substantially based on climate conditions, and driving habits. Extreme outside temperatures tend to increasing the emissions, because more fuel must be used to heat or cool the cabin. Also, high driving speeds increases the emissions because of the energy required to overcome increased drag. Compared with gradual vehicle acceleration, rapid vehicle acceleration increases the emissions. Additional devices (air-conditioner and heater) and road inclines also increases the emissions. In this study, three light-duty vehicles were tested with WLTP, NEDC, and FTP-75, which are used to regulate the emissions of light-duty vehicles, and how much emissions can be affected by different driving cycles. The emissions gas have not shown statistically meaningful difference. The maximum emission gas have been found in low speed phase of WLTP which is mainly caused by cooled engine conditions. The amount of emission gas in cooled engine condition is much different as test vehicles. It means different technical solution requires in this aspect to cope with WLTP driving cycle.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.2
• /
• pp.107-115
• /
• 2007

Objective: A quality management system of international standardization organization (ISO) 9001:2000 has been proposed to properly evaluate and improve the quality of productions and services. The purpose of this article was to describe on successful introduction and application of the ISO system to human assisted reproductive technology (ART) center. Methods: Center for reproductive medicine and infertility of Cheil General Hospital started the action for ISO 9001:2000 certification at January-2004. The ISO system of our center was monitored by measuring the customer satisfaction index and periodical internal and external audit. Reports of non-conformity described corrective and preventive actions for problems and occurrences that were not consistent with the standard process and operation of our center. Continuous management and improvement were performed on the project of customer dissatisfaction. Results: Our center has got the certification of ISO 9001:2000 for "Research and development of IVF-ET program for infertility treatment" from Korean Foundation for Quality at June-2004. The policy of ISO was "To establish the best center of reproductive medicine and infertility" and "To establish the best quality management system". We found 140 cases and 7 cases of non-conformity in internal and external audit for three years, respectively, and performed corrective action. Conclusion: Improvement of customer satisfaction, systemic documentation and transparency and efficacy of working procedure were achieved by application and operation of the ISO system to our center. This ISO system could be used as a basic institutional management system for the national guideline to the human ART center.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.425-435
• /
• 2017

Structural analysis is used not only for large enterprises, but also for small and medium sized ones, as a necessary procedure for strengthening the certification process for product delivery and shortening the time in the process from concept design to detailed design. Open-source solvers that can be used atlow cost differ from commercial solvers. If there is a problem with the input data, such as with the grid, errors or failures can occur in the calculation step. In this paper, we propose a pre- and post-processor that can be easily applied to the analysis of mechanical structural problems by using the existing structural analysis open source solver (Caculix, Code_Aster). In particular, we propose algorithms for analyzing different types of data using open source solvers in order to extract and generate accurate information,such as 3D models, grids and simulation conditions, and develop and apply information analysis. In addition, to improve the accuracy of open source solvers and to prevent errors, we created a grid that matches the solver characteristics and developed an automatic healing function for the grid model. Finally, to verify the accuracy of the system, the verification and utilization results are compared with the software used.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.787-796
• /
• 2009

The electronic commerce keeps going through a tremendous growth since the latter half of 1990's. But the consumer damages are being increased from characteristics such as non-confrontation, anonymity, internationality, unilaterality and possibility of temptation. Accordingly, this thesis has derived legal and systematic improvements for consumer protection in general as follows. First of all, it is necessary to extend the period to exercise the subscription withdrawal rights according to electronic commerce consumer protection law. Second, the electronic commerce has high possibility of causing errors by consumers because it is performed by non-confrontation and the accurate information must be provided to prevent errors in advance because it is not easy for consumers to prove their own errors. Third, a certification mark system on electronic agreement has to be adopted. Fourth, the legal, systematic and technological measures have to be adopted to prevent from having a sense of fear toward leaking or using personal information through a safe personal information management. Fifth, a strict supervision on internet trust mark is required. Finally, because the intervention or interference by a third party may take place through a hacking on messages or documents sent according to procedure in terms of online settlement, it is necessary to raise security on the system through a precise authentication between concerned parties.

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.301-310
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of work intensity on fit factor and affective quality of the dustproof Background: Among the victims who suffer pneumoconiosis due to the inhalation of toxic substances or the lack of oxygen during the work, the proportion of the victims is larger than the other causes. Wearing a respirator may prevent pneumoconiosis, but it can be hazardous to workers because of the leakage through filters, cartridges, exhaust valves, broken parts, and face-to-face contact. Despite leakage through the contact area between the mask and the face has various causes such as the wearer's activity, sweat accumulation, facial shape, etc., There is a lack of relevant research and regulation compared to developed countries that have already institutionalized the law 30 years ago and give the right to sell through a test Method: The work intensity was adjusted by walking or running at 6km/h and 11km/h on the treadmill, and tasks were defined with reference to the test procedure and the exercise sequence applied in the face leakage test of the dustproof mask. And fit factor was measured objectively using 'Respirator Fit Tester 8038' which measures fit factor calculated by dividing the number of dust present outside the mask by inside the mask. In addition, affective quality was classified by the ease of use, ease of breathing, and ease of wearing, and was measured using the 5-point likert scale questionnaire. Results: There was a significant difference in fit factor, ease of breathing, and wearing convenience according to work intensity and no significant difference in ease of use(${\alpha}=0.01$). And when the work intensity was high, fit factor, ease of breathing, and wearing convenience were all lower than when the work intensity was low. Conclusion: In Korea, it is necessary to consider consideration of the work intensity when testing the leakage rate of the face part for safety certification of the respiratory protective equipment, When developing a mask, it should be possible to maintain high adhesion even under intense, active situation and high temperature conditions by selecting materials, improving the wearing style, and expanding the adjustable range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.754-763
• /
• 2018

The maritime ICT-convergence equipment are essentially required to a type approval (TA) certification that needs environmental and functional tests, to install in vessel. The environmental test is to experiment the possession for required durabilities of the target device in maritime environment, and the functional test is to check the required functions of target equipment based on international standard. In Korea, the environmental testing facilities amount to 227 sites, but there is no functional testing facility. Because of this, we establish a function test facility for the maritime ICT-equipment. In this paper, we analyze and design the functional testing requirement and required interlocking simulators for digital interfaces and navigation communication equipment. We propose the 2-steps of functional testing procedures, which are single test and integration test, to improve the reliability of testing result. The single test is to examine own functions of the target device, and the integration test is to check harmonized operation with other navigation and communication devices.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.479-483
• /
• 2018

Our group reported the thermal decomposition of R-22 ($CHClF_2$) refrigerants by nitrogen thermal plasma in previous studies. However, it was proposed that the wastewater generated from the end part of the process contains high concentration of fluoride ion which is a component of R-22. The additional post-treatment process to neutralize the $F^-$ ions in the wastewater was investigated in this study. The wastewater generated through the decomposition of R-22 with the same procedure in the previous work was treated using the neutralizer, $Ca(OH)_2$, and the atmospheric pressure plasma jet (APPJ) independently as a post-treatment process. Wastewater samples were collected directly after the treatment for ion-chromatography analysis to trace the change of the concentration of $F^-$ ion in the wastewater. The fluoride concentration in the wastewater showed the highest value when the single water was used as a neutralizer, and the concentration of fluoride in the wastewater was dramatically reduced when the post-treatments were performed.