• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.979-981
• /
• 1999

This paper designs a ball and beam system using Coefficient Diagram Method (CDM). The ball and beam system is used in many undergraduate control classes to verify a control algorithm or for pure educational purposes. Recently CDM is known to be useful for designing a controller with relatively easy procedure and procedures a low order, no overshoot, and robust controller In this paper. CDM is applied to design a controller for the ball and beam system, and the controller is compared to that of LQG method. The result show that CDM gives better controller than LQG method.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.682-685
• /
• 2000

In this paper, Using CDM(Coefficient Diagram Method), we set target polynomial constraints and design 4-PID controller which have different structures such as Textbook PID-controller, Derivative of output PID-controller, set point of I only controller(I-PD controller) and PI controller followed by lag network(PI lag network controller) were tested by simulations. The plant we used are that used in IFAC 93 benchmark test. A controller designer, using CDM could use these results to select the controller's structure which is the best one fer him.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.100-103
• /
• 2002

This paper proposes the new PID controller tuning Method for nonminimum phase plant by using CDM. The proposed method effectively handles with the problem of overshoot in the nonminimum phase plant occuring by the previous Z-N method and it proposes the PID controller tuning method with CDM, when failing to find critical gain in PID controller tuning using Z-N method

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.353-360
• /
• 2000

A design of PIDA(Proportional-Integral-Derivative-Acceleration) controller for the third-order plant using the CDM(Coefficient Diagram Method) is presented. Using CDM, the closed-loop system with the designed PIDA controller can be made stable and satisfied both the transient and steady state response specifications without any adjustment. The effect of output step disturbance can also be lastly rejected. The fast step response of the controlled system can be achieved by reducing the equivalent time constant. The MATLABs simulation results show that the performances of the designed controlled system using CDM is better than the performance of the controlled system using PIDA controller designed by its own technique.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.982-984
• /
• 1999

For active noise control system, one would choose one of two methods: Fixed control design and Adaptive filter design. Each one has its own advantages. But fixed controller design method prefer for active noise control in a small cavity system. In this paper, we design a controller for the small cavity system using CDM and compare controller using CDM with $H{\infty}$. The order of the resulting controller is lower than that of the robust $H{\infty}$ design, which means CDM will be more prefer for implementation purpose designs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.55-60
• /
• 2003

In the controller design of position or velocity control system, the flexibility of the mechanical system is always the limiting factor to the higher performance. Most mechanical systems coupled with rotary shaft are 2-Inertia systems which are consist of motor and load inertia. These inertias make a torsion In rotary shaft and cause torsional vibration. To suppress vibration, various control strategies have been proposed mainly for controlling 2-inertia system. In this paper, a speed controller design for a 2-inertia system composed of voltage controlled DC motor and load inertia is made by using CDM(coefficient diagram method). First, the 2-inertia system model is derived. Then the CDM is used to design the proper controller. A validity of this approach is confirmed by simulation and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.284-287
• /
• 1999

A design of I-PDA controller for the third order plant by CDM is presented in this paper. Using CDM in the controller design procedures, the step responses of the controlled system with the I-PDA controller satisfied both transient and steady state response specifications without adjustment, and also satisfy the requirements of stability, faster response and robustness. The step responses of the controlled system using I-PDA controller are coiniciding to the ones using PIDA controller, and the integral gain of the I-PDA controller also equals to the prefilter gain of the PIDA controller designed by CDM. The effect of the disturbances can also be lastly eliminated. The fast step response of the controlled system can be obtained by reducing the equivalent time constant. MATLAB's numerical results show that the desired specifications of the controlled system using I-PDA controller is obtained. Furthermore, the results also show a good robustness that the desired performances of the controlled system have no significant changed when the plant parameters are varied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.395-400
• /
• 1998

A design of PIDA (Proportional-Integral-Derivative-Acceleration) controller for the third-order plant using the CDM (Coefficient Diagram Method) is presented. Using CDM, the closed-loop system with the designed PIDA controller can be made stable and satisfied both transient and steady state response specifications without any adjustment. The effect of output step disturbance can also be lastly rejected. The fast step response of the controlled system can be achieved by reducing the equivalent time constant. The MATLAB's simulation results show that the performances of the designed controlled system using CDM is better than the performances of the controlled system using PIDA controller designed by its own technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1901-1905
• /
• 2004

A controller designed by CDM for a servo type system which is an augmented system constructed from a rotational inverted pendulum with an integrator added to its arm, is presented in this paper. In order to be able to apply the CDM concept, the augmented system must be linearized and converted into controllable canonical form. Then, the controller consisting of the state feedback gain matrix and an integral gain in the sense of CDM can be obtained. This shows that design procedure for the proposed controller is easy. The experimental results obtained from the rotational inverted pendulum controlled by the proposed controller show that the system response has no steady-state error, however, the oscillation amplitude of the arm angle is still significant. Therefore, in this paper, the friction compensation using Coulomb friction with stiction is also added to the controller. The oscillation amplitude of the arm angle that can be reduced remarkably is also shown in the experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.455-457
• /
• 1998

This paper designs a noise controller for the small cavity using Coefficient Diagram Method(CDM). In the small cavity system, there exist nonlinear characteristics such as uncertain-time delay and parameter variation. In the controller design of nonlinear system with uncertainty need to the higher order controller or complexity computation. The coefficient diagram is convenient implementation of the control system design method, that is utilized as a vehicle to collectively express the important features of the system and an improved version Kessler's standard form and the Lipatov stability condition of a constitutes the theoretical basis. Simultaneously, it is provided a desired specification, such as the robustness, the stability, faster response, and lower order controller. A simulation of the system with the proposed controller shows sufficient noise cancelation in small cavity.