• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.219-229
• /
• 2016

This study presents the analysis of flood and bed deformation caused by reservoir failure. The CCHE1D is used to simulate 1D non-uniform, non-equilibrium sediment transport and bed deformation. The CCHE1D deals with the adaptation length for non-equilibrium sediment, classified sediment particle for non-uniform sediment and mixing layer for the exchange with the sediment moving with the flow. The model is applied to Ha!Ha! river basin where was experienced reservoir failure in 1996 to analyze non-uniform and non-equilibrium sediment transport. The calculations are compared with morphological bed changes of pre- and post-flood. In addition, model sensitivity to main parameters involving adaptation length ($L_{s,b}$), non-equilibrium coefficient (${\alpha}_s$), mixing layer thickness (${\delta}_m$) and porosity (p') is analyzed. The results indicates that thalweg change is the most sensitive to non-equilibrium coefficient (${\alpha}_s$) among those parameters in the study area.

• Water for future
• /
• v.24 no.2
• /
• pp.109-119
• /
• 1991

The river-bed variation and the sediment transport in an alluvial stream are very complicated physical phenomena, especially in a stream where the dam construction prevents the supply of earth and sand from upper tributaries Therefore, the mathematical modeling is needed to establish. The purpose of this study is to apply river-bed variation to the Han River downstream by the conception of gradually varied unsteady flow instead of that of steady flow in order to decrease errors. For the variation and forecast of river-bed, the numerical analysis has been made in this study by way of discharge variation and river-bed variation. In conclusion, the numerical analysis shows that river-bed variation, sediment transport , and their forecast have similarity to natural phenomena and that river-bed variation is greatly affected in sediment transport by discharge variation and retention time(duration). Therefore, the errors of numerical analysis can be reduced by the application of flood data instead of continuous discharge data.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.1
• /
• pp.84-95
• /
• 1994

In recent years Jin-Beach and Hyeya River mouth have experienced severe erosion phenomena. The cause of erosion is examined using a 3-dimensional nunumerical sediment transport model. The model is composed of three components : wave model, wave-induced current model and 3-dimensional sediment transport model. In the wave analysis component we consider refraction, diffraction and reflection based on Maruyama and Kajima method. For the wave-induced current model we use depth-integrated continuty equation and momentum equations. For the 3-dimensional sediment transport model we consider bed load and suspended load simutaneously. Model results obtained for Jin-ha Beach and Hyeya River mouth agreed well with experimental results.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.537-543
• /
• 2008

The sediment resuspension and diffusion model is an integral part of a sediment transport and morphologic change model. We examined a vertical one-dimensional sediment resuspension and diffusion model using field data collected at about 10-m depth off the Saemangeun $4^{th}$ dike. The field data include waves, currents and suspended sediment concentration near the bed for about a day in May, 2007. The suspended sediment concentration obtained from the 1D model overestimated the observation about two orders of magnitude with single grain size and multiple grain sizes. The incorporation of the bed armoring effect, which adjusts the amount of suspended sediment with the available bed sediment, improved the agreement between the model and observation within a factor of two.

• Journal of applied mathematics & informatics
• /
• v.41 no.1
• /
• pp.181-192
• /
• 2023

This work deals with the numerical modeling of dam-break flow over erodible bed. The mathematical model consists of the shallow water equations, the transport diffusion and the bed morphology change equations. The system is solved by central upwind scheme. The obtained results of the resolution of dam-beak problem is presented in order to show the performance of the numerical scheme. Also a comparison of central upwind and Roe schemes is presented.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.31-39
• /
• 2014

The objective of this study is to suggest the proper sediment transport equation and short and long-term bed change for planning and implementing the river management in Korea. To analyze total sediment discharge and short and long-term bed change, existing sediment transport equations, HEC-RAS 4.1 and CCHE2D numerical models were applied in urban and mountainous rivers. The results of this study are as followings; Firstly, the modified Einstein equation showed the most appropriate result for the estimation of total sediment discharge in the local rivers. Secondly, The stage-discharge relation curve and the discharge-total sediment discharge relation curve were suggested to examine the characteristics of river bed change. Finally, it is founded that river bed change of mountainous river has occurred greater than that of the urban river, and the river bed of urban river now tends to be stabilized on the whole.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.3-16
• /
• 2002

This article describes some of the recent and on-going research developments of the author at Colorado State University. Advances in the field of sedimentation and river mechanics include basic research and computer modeling on several topics. Only a few selected topics are considered here: (1) analytical determination of velocity profiles, shear stress and sediment concentration profiles in smooth open channels; (2) experiments on bedload particle velocity in smooth and rough channels; (3) field measurements of sediment transport by size fractions in curved flumes. In terms of computer modeling, significant advances have been achieved in: (1) flashflood simulation with raster-based GIOS and radar precipitation data; and (2) physically-based computer modeling of sediment transport at the watershed scale with CASC2D-SED. Field applications, measurements and analysis of hydraulic geometry and sediment transport has been applied to: (1) gravel-bed transport measurements in a cobble-bed stream at Little Granite Creek, Wyoming; (2) sand and gravel transport by size fraction in the sharp meander bends of Fall River, Colorado; (3) changes in sand dune geometry and resistance to flow during major floods of the Rhine River in the Netherlands; (4) changes in hydraulic geometry of the Rio Grande downstream of Cochiti Dam, New Mexico; and (5) analysis of the influence of water temperature and the Coriolis force on flow velocity and sediment transport of the Lower Mississippi River in Louisiana. Recent developments also include two textbooks on "Erosion and Sedimentation" and "River Mechanics" by the author and state-of-the-art papers in the ASCE Journal of Hydraulic Engineering.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.3
• /
• pp.201-208
• /
• 2002

The characteristics of suspended sediment transport are analyzed at the estuaries which show significant shallow water tides, following the previous research for bottom sediment transport at the same estuaries. Several theories which are related with the formation and transition of turbidity maximum are reconfirmed by the numerical experiments. The experiments suggest the necessity of modeling the shallow water tide as a boundary condition, as was also suggested for the bed sediment transport at the previous research. Both the differences of transport characteristics between bed and suspended sediment and the differences between flood/ebb dominances and high/low water dominances are also examined at the Keum River and Youngsan River estuaries. In addition, the transport of bed and suspended sediments are found to have the opposite directions at the Youngsan River estuary which has extensive tidal flat, and thus shows pronounced ebb dominance, which is considered to be a main reason of keeping present bathymetry.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.687-699
• /
• 2001

A 2-dimensional numerical sediment transport model has been developed by using erosion rates observed by SEDFLUME. The model un boundary-fitted coordinate can reduce inaccuracy of sediment model with accurate erosion data. Suspended transport and bed load transport are included in the model together. The model results gave good agreement with particle size distributions in 1-d channel and was more accurate than that of HIDAS of 1-dimensional model. The model applied to an enlarging channel to check model performance in 2-dimensional domain. Bed coarsening reduced erosion and deposition.