• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.372-378
• /
• 2007

This paper presents an improvement of field uniformity in a reverberation chamber with QRDs(Quadratic Residue Diffuser) and also shows the optimal dimension of the QRDs. The QRD is designed for $1{\sim}3\;GHz$ frequency band and the FDTD(finite-Difference Time-Domain) method is used to analyze the field characteristics. At 2 GHz, the standard deviation of test volume in the reverberation chamber is the smallest when the QRD has $30{\sim}60\;%$ coverage of one side of the reverberation chamber and the field uniformity is worsened when the coverage of the QRD is either below 20 % or above 70 % of the area of the side wall. Particularly, the standard deviation of test volume in the reverberation chamber with 30 % coverage of QRD is improved by 1.53 dB compared to that of the reference chamber with no QRDs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.53-60
• /
• 2010

This paper presents a novel gain control system composed of a feedback circuit, Two stage Low Noise Amplifier (LNA) using 0.18 um CMOS technology for 5.2 GHz. The feedback circuit consists of the seven function blocks: peak detector, comparator, ADC, IVE(Initial Voltage Elimination) circuit, switch, storage, and current controller. We focus on detecting signal and designing storage circuit that store the previous state. The power consumption of the feedback circuit in the system can be reduced without sacrificing the gain by inserting the storage circuit. The adaptive front-end system with the feedback circuit exhibits 11.39~22.74 dB gain, and has excellent noise performance at high gain mode. Variable gain LNA consumes 5.68~6.75 mW from a 1.8 V supply voltage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.78-84
• /
• 2007

A multistandard direct-conversion mixer for WCDMA, Wibro, and 802.11a/b/g is designed in 0.18 um CMOS technology To support multistandard and to reduce the chip area the switched inductor is used as the matching method. This switched inductor matching network selects the mixer's operation frequency band by turning on or off the switch transistor. Since the performances of mixer and operation frequency can be affected by the parasitic of switch transistor the mixer should be designed with the optimized size of switch to minimize parasitic effects. Proposed mixer is able to achieve return loss less than -13 dB in $2.1\sim2.5GHz$ and $5.1\sim5.9GHz$ bands with the suitable performance to meet requirements of WCDMA, WiBro, and 802.11a/b/g.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1370-1382
• /
• 2007

In this paper, the spiral planar monopole antenna mounted on a Cellular/WCDMA handset is designed. Frequency characteristics is optimized with various design parameters. The two spiral lines are adopted in order to implement Cellular frequency bandwidth and WCDMA frequency bandwidth. The bandwidth of the realized antenna is $0.805{\sim}0.892$ GHz(10 %) and $1.867{\sim}2.302$ GHz(21 %) for VSWR${\leq}2$ which contain the proposed frequency bandwidth. In human head, the simulated value on 1 g and 10 g averaged SAR caused by electromagnetic wave radiated in the designed antenna is compared with the measured value. As a result, the measured values of 1 g and 10 g averaged SAR were similar to the simulated values, which were lower than the SAR guidelines.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1391-1401
• /
• 2007

This paper proposed a novel broadband printed monopole antenna for PCS/IMT-2000/WLAN terminals. Frequency characteristics are optimized with various design parameters. Two Z-shaped patchs were utilized in order to improve the characteristics of a printed monopole antenna which usually has a narrow bandwidth. The bandwidth of the realized antenna is $1.590{\sim}2.614$ GHz(48.43 %) below the return loss of -10 dB which contain the required bandwidth of PCS/IMT-2000/WLAN band. The simulated and measured values of 1 g and 10 g averaged peak SAR on human head caused by the proposed antenna on folder-type phone were analyzed and discussed. As a result, the measured 1 g peak SAR value is 0.794 W/kg and 10 g peak SAR value is 0.368 W/kg at 1.8 GHz. The results are smaller than the reference SAR limit values that are respectively 1.6 W/kg and 2 W/kg on 1 g and 10 g averaged SAR values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.167-173
• /
• 2008

In this paper, the flexible narrow bandpass filters (BPFs) with ${\lambda}$g/4 short and ${\lambda}$g/2 open stubs by microstrip line on duroid substrate are suggested. These BPFs with narrow bandwidth show flexible bandwidth with variation of the position of the stubs using the Qe (external quality factor) without changing the impedance value at microwave range. On the other hand, by replacing the series quarter-wavelength connecting lines with the equivalent T-shaped line of bandstop filter(BSF), the compact stub bandpass filter with harmonics suppression can be realized. The BPF with ${\lambda}$g/4 short stubs shows the insertion loss of 2.1 dB and the return loss of 18 dB and BPF with ${\lambda}$g/2 open stubs shows the insertion loss of 1.2 dB and the return loss of 21.9 dB at the center frequency of 5.8 GHz and the bandwidth of 10 %.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.27-37
• /
• 2001

The design, fabrication, and an experimental implementation of the strip patch antenna coupled with a H-shaped aperture arc presented in this paper. The proposed antenna has the wide bandwidth, high gain, and low cross-polarization levels. We measured the VSWR, smith chart impedance characteristic, co/cross polarization pattern, gain, and so on. The measured bandwidth of this antenna is 47.1 %. To reduce the back lobe and increase the gain, when the reflector is used, cross polarization level is below -18.2dB at E-plane and below 25.7 dB at H -plane. The maximum gain at 2.05 GHz is also 10.4 dBi and the 3 dB gain bandwidth with center frequency at 2.17 GHz is 24 %, which is the wide bandwidth. This antenna can find applications in mobile communication, wireless LAN, RF communication system, and so on.

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.257-262
• /
• 2010

We design a CMOS front-end with wide variable gain and low power consumption for 5.25 GHz band. To obtain wide variable gain range, a p-type metal-oxide-semiconductor field-effect transistor (PMOS FET) in the low noise amplifier (LNA) section is connected in parallel. For a mixer, single balanced and folded structure is employed for low power consumption. Using this structure, the bias currents of the transconductance and switching stages in the mixer can be separated without using current bleeding path. The proposed front-end has a maximum gain of 33.2 dB with a variable gain range of 17 dB. The noise figure and third-order input intercept point (IIP3) are 4.8 dB and -8.5 dBm, respectively. For this operation, the proposed front-end consumes 7.1 mW at high gain mode, and 2.6 mW at low gain mode. The simulation results are performed using Cadence RF spectre with the Taiwan Semiconductor Manufacturing Company (TSMC) $0.18\;{\mu}m$ CMOS technology.)

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.161-166
• /
• 2007

In this paper, two 4$\times$4 rectangular patch array antennas operating at 20 GHz are implemented for the satellite communication. The sixteen patch antennas and microstrip feeding line are printed on a single-layered substrate. The design goal is to achieve high directivity and gain by optimizing design parameters through permutations in element spacing. The spacing between the array elements is chosen to be 0.736$\lambda$. Numerical simulation results indicate that the HPBW(Half-Power Beam Width) of the 4$\times$4 patch array antenna is 18.78 degrees in the E-plane and 18.48 degrees in the H-plane with a gain of 17.18 dBi. Numerical simulations of a 4$\times$4 recessed patch array antenna yield a HPBW of 18.71 degrees in the E-plane and 17.82 degrees in the H-plane with a gain of 19.43 dBi.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.1-7
• /
• 2016

In this paper, the design methodology of a corrugated conical horn antenna is proposed to be obtain wide-band properties over the full range of frequencies in the Ku-band. In order to improve the properties of the corrugated conical horn antenna, such as its gain, VSWR, co-polarization to cross-polarization ratio and wide-bandwidth, two types of mode matching converters are implemented within it. One is located at the end of the circular waveguide, while the other is positioned in front of the horn-flare section. The properties of the antenna are analyzed and compared according to the position of the proposed converters through simulations. In the comparison of the antenna performance in the case where the VSWR, co-polarization to cross-polarization ratio and antenna gain over the Ku band of 12-18 GHz are less than 2, greater than 30dB and 20dB respectively, the former antenna exhibits greater stability and a wider frequency band than the latter from the viewpoint of transmitting and receiving signals simultaneously. Therefore, considering the gain, VSWR, radiation pattern and bandwidth, the horn antenna structure in which the mode matching converter is implemented inside the circular waveguide has better performance than the other.