• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.397-406
• /
• 2009

Recently, the number of industrial structures that must be demolished due to structural deterioration and unsatisfactory functional conditions has been increased. To minimize environmental hazardous factors created during the process of demolition, the explosive demolition method has been applied increasingly. This execution case was intended to describe an application of the explosive demolition method to the demolition of a Crusher & Screen structure, which was a large-section reinforced concrete special structure. It was deemed necessary due to its structural deterioration and unsatisfactory functional condition. Various pre-weakening processes and blasting patterns were applied to the large-section reinforced concrete members, and to reduce blasting vibration and impact vibration, time intervals were established for blasting in the same column and for blasting between blasting blocks. By applying the explosive demolition method to the demolition of a large-section reinforced concrete special structure, the explosive demolition was completed safely and efficiently, without causing any damage to surrounding facilities.

• Tunnel and Underground Space
• /
• v.3 no.1
• /
• pp.11-23
• /
• 1993

• Korean Architects
• /
• no.4 s.312
• /
• pp.98-105
• /
• 1995

• Explosives and Blasting
• /
• v.18 no.4
• /
• pp.61-68
• /
• 2000

본 기사는 2000년 3월 26일 미국 시애틀 소재 Kingdome 체육관 시설을 발파해체공법을 이용하여 해체한 사례로서 The Journal of Explosives Engineering(v.17 n.5, 2000)에 기고한 Dr. Douglas A. Anderson (Senior Consultant, West Chester, PA office of Schnabel Engineering Associates, Inc.)의 글을 옮긴 것이다. Kingdome 구조물의 해체와 해제 후 Seahawk Stadium 건설의 책임을 맡은 주계약자는 Turner Construction 회사이며 발파해체 사전준비 및 사후처리의 택일은 Aman Environment사, 발파해체 설계 및 시공은 CDI사, 주위 주요 구조물에 대한 영향평가 및 진동계측은 Schnabel Engineering Associates사가 맡아 수행하였다. 이 건물은 세계에서 가장 큰 규모의 쉘 콘크리트 돔 구조로 되어 있으며, 주위에 주요 구조물들이 위치하고 있고 특히 이 지역에 과거 발생했던 지진으로 인하여 주민들이 지반진동에 대한 피해나 또는 지진을 유발하수도 있다는 위험 가능성에 매우 예민하여 관심이 높았던 해체사례이다. 이 구조물을 한번에 붕괴시킬 경우 지반에 25,000톤의 중량이 충격으로 작용할 수 있으므로 충격을 최소화하기 위한 방법에 초점을 맞추어 설계되었으며 5,905개의 천공에 4,728파운드(약 2,145kg)의 폭약이 사용되었고 도폭선을 이용하여 기폭시켰다. 사용된 도폭선의 길이는 약 37.9 Km에 달하였다. 발파해체 기사에 나타나 있듯이 주위에 피해를 주지 않고 성공적으로 수행되었다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.101-109
• /
• 2009

This CW(Construction wastes) are increasing as construction industry is growing, so many countries make efforts to recycle CW. Korea also made a stipulation for recycling CW. But the main content of this stipulation is for using recycled aggregates. Advanced countries try to increase reuse rate of not only recycled aggregate but also other kinds of wastes. So they are adopting SDM(separating dismantlement) method and we are also planning to make the system for SDM. This study is about SDM analysis through construction field investigation and difference analysis between SDM and UDM comparing predictive amount by UDM with real generated amount by SDM. First, the generated amount of construction wastes by SDM is more than estimated amount by UDM, and mixed waste was specially reduced more than UDM. The warehouse is easier than the office building to applicate SDM. But still there is no manual for SDM in the site, so establishment of SDM is demanded.

• Explosives and Blasting
• /
• v.18 no.3
• /
• pp.89-97
• /
• 2000

최근 노후화 된 콘크리트 및 털 구조물에 대하여 환경 공해가 발생하지 않는 해체 기술의 필요성이 급증하고 있어서 이에 대한 연구가 활발히 이루어지고 있다. 그 결과 콘크리트 구조물을 일시에 해체하기 위하여 사용되고 있던 화약을 이용한 발파해체공법 및 군용 폭파 공법 등으로부터 응용되어 특수한 형태의 크기로 제작된 성형폭약을 철골구조물에 부착시킨 후 이를 폭발 시켜서 순간적으로 철골구조물의 철판(또는 빔이나 기타 부자재)을 절단 해체할 수 있게 되었다. 그 동안은 성형폭약의 폭발절단 효과에 영향을 주는 요소들인 대상 구조물의 재질 및 형상, 두께와 강도 특성, 성형폭약의 형상, 폭약의 종류, 장약량, Liner의 종류, Stand-off Distance, 성형폭약의 폭 및 너비, 기폭방법에 따른 영향과 폭발 절단시 발생되는 폭풍압에 의한 진동 및 소음의 영향 등에 대한 연구가 대부분이었다. 따라서 본 연구에서는 성형폭약의 주 구성요소인 화약과 금속성 Liner를 유연성이 탁월하고 조성 성분들의 혼합성과 성형성이 우수한 가소화제를 사용하여 제작된 성형폭약의 가소화 정도가 폭발절단력에 미치는 영향을 검토하였다. 이를 위하여 본 연구는 PETN 과 RDX 화약이 각각 25wt% 및 75wt%로 흔합된 화약원료를 85wt%로 하고 폴리이소부틸렌(P.I.B) 성분이 80 wt% 이상인 폴리부텐(P.B) 7wt% 와 부틸고무 4wt% 그리고 디에칠헥실세바케이트 4wt%로 구성된 가소화제를 사용하여 실험하였다.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.43-55
• /
• 2004

Use term of tower style construction exceeds recently. Accordingly, according to construction safety diagnosis result, achieve removal or Improvement construction. But when work removal, must shorten shut down time. Therefore, removal method of construction to use blasting demolition of construction is very profitable. Influence construction and equipment by blasting vibration and occurrence vibration caused by felling impact. Is using disadvantageous machine removal method of construction by and economic performance by effect of such vibartion. Therefore, this research studied techniques to forecast vibartion level happened at blasting demolition and vibration reduction techniques by use a scaled model test.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.113-120
• /
• 2012

This study was conducted basic research for introduction plan of building dismantlement to reduce construction waste fundamentally and efficiently. The current domestic and overseas legislations relation with dismantlement were compared. In addition, the difference of construction waste treatment and pure demolition cost that were applied to dismantlement and general deconstruction method in building were compared. The total cost that was estimated to apply dismantlement in building was higher about 6% than that of general deconstruction.

• Explosives and Blasting
• /
• v.28 no.2
• /
• pp.99-107
• /
• 2010

Domestic explosive demolition techniques have been developed and applied for low-rise structures up to now. However, the demand for the development of those techniques that can be applied economically, safely and environment-friendly rapidly increases because the old high-rise RC rahmen structures that were built since around 1970s are now required to rebuild. As a result, element technologies of explosive demolition for low-rise structures were applied to take advantage of technology in high-rise structures that performed application testing at Chungang Department demolition field in Daejeon city. It could judge elements technology establishment for high-rise structure demolition and field application and suggest the improvements when the problems occurred to develop High-rise building demolition techniques for method of protection a field test and the dust reduction test. The water cannon test was applied to reduce the dust site and the drilling tests are performed to select the best components for explosives demolition elements techniques of the reliability. This paper shows that we have the ability to remove a high-rise building using environmentally friendly safe and economical explosives demolition method. It would contribute to prevent a foreign company from entering the domestic market and should contribute to acquire competitiveness of domestic demolition industry.

• Journal of Software Engineering Society
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2012

Characteristic of decommissioning target facility investigate and understand is very important. because radioactive materials occurs in the decommissioning and dismantling, so it is difficult to use a general dismantling method. Decommissioning nuclear facilities, the characteristics of the target of research to predict the amount of decommissioning waste, decommission projects costing is largely utilized. For this purpose, we developed DEFACS(Decommissioning Facility Characterization DB System) that manage characteristic of decommissioning target facility. But nuclear facility decommissioning takes long time. so we inevitably developed system during decommissioning works, it occurs many system changes. For this reason, it is difficult to apply general development process, so we take CBD process that divide CD(Component Development) and CBSD(Component Based Software Development) for handling change of requirement. it make Component of the overall system for changes to minimize changes by strengthening the independence of components and processes due to changes in requirements were to minimize stopping of the process.