• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.289-294
• /
• 1998

본 논문에서는 상태행렬과 입력행렬에 시변 불확실성이 있는 선형시스템에 대한 강인 추적 제어기를 제안한다. 본 논문에서 대상으로 하는 불확실성은 block-diagonally structured uncertainty와 norm bounded uncertainty인데 모두 정합 조건을 만족시킬 필요는 없다. 폐루프 시스템이 불확실성하에서 안정할 수 있는 조건을 제시하고 이 조건이 선형행렬 부등식으로 나타낼 수 있음을 보인다. 추적 오차를 줄이고 오차 감소 비율을 증가시킬 수 있는 최적화 방법도 제아한다. 또한 불확실성의 크기가 0으로 줄어들면 추적 오차도 0으로 줄어듬을 보인다.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.30-35
• /
• 2009

A new controller which can achieve the asymptotic tracking is proposed for the nonlinear system having a uncertainty in the input coefficient. A high gain observer is used to estimate the state variables when the nonlinear system has a modeling uncertainty. A variable structure control is used to achieve an asymptotic tracking, while ultimate boundness was achieved in the previous work. A Lyapunov analysis is used to justify the our proposal. The performance of proposed method is demonstrated via simulation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.284-289
• /
• 2003

The electric furnace, inside which the desired temperature is kept by the generated heat, is known to be a difficult system to control and model exactly because system parameters and response delayed time are varied as the temperature and positions are changed. In this study, the GPCEW (generalized predictive control with exponential weight), which always guarantees the stability of the closed loop system and can be effectively applied to the internally unstable system, was introduced to the ceramic drying electric furnace and was verified by showing its temperature tracking performance experimentally.

• Journal of Wind Energy
• /
• v.4 no.2
• /
• pp.17-24
• /
• 2013

Idealized PID-controlled rotor-speed error for blade pitch control of wind turbines responds as a second-order system with natural frequency and damping ratio for closed-loop system. RISO National Laboratory has recommended specific natural frequency(=0.6 rad/s) and damping ratio(=0.7) for 2 MW wind turbine. The baseline controller for 5 MW wind turbine of NREL(National Renewable Energy Laboratory) is designed based on the same values of RISO recommendation. This study investigates the effect of the natural frequency and damping ratio of the controller for NREL 5 MW wind turbine. It is confirmed that RISO recommendation shall be tuned for each wind turbine.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.49-56
• /
• 2002

In this paper, a new controller using non-linear compensator for position control is presented, which we can satisfy the given specifications more easily than the existing one. We suggest an improved PDFE(Integral with Proportional-Derivative-plus-Feedforward) controller by which both phase margin and bandwidth are controlled simultaneously in the controller design problem. Replacing the feed forward term in the PDFF system with a CDIDF(Complex Dual Input Describing Function), the desired phase margin is obtained without diminishing the bandwidth of the closed loop system. The effectiveness of the proposed controller is confirmed through simulations and experiments. As The results of these, we know that it is possible to adjust overall specifications by varying parameters in the improved PDFF system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.75-78
• /
• 2006

본 논문에서 우리는 HIV-1 바이오 동역학모델의 퍼지 모델링 및 디지털 퍼지 제어 기법을 소개한다. 그것의 제어구조는 샘플링 점들에서 측정한 상태로부터 현재 상태를 대략적으로 예측하는 수치적 적분 구조를 사용한다. 제안된 지능형 디지털 재설계에서는 전역 상태-정합과 안정도 조건들을 동시적으로 만족하는 타당한 디지털 제어 이득들을 찾는 것이다. 우리는 보상된 블록-펄스 함수를 이용하여 새로운 전역 상태-정합 조건을 우선 제시하며 그리고 나서 안정도 조건들을 이 조건들에 추가한다. 유도된 조건들은 선형행렬 부등식으로 묘사되며, 그로인해 볼록 최적화 문제로 쉽게 해결될 수 있다. 또한, 안정도 조건으로 인한 성능 하강을 방지하기 위해 두 단계 지능형 디지털 재설계 과정이 제안된다. 첫 번째 단계에서는 전역 상태-정합만을 고려한 디지털 제어 이득을 찾는다. 두 번째 단계에서는 얻어진 디지털 제어하의 폐루프 시스템을 안정화 시키는 추가디지털 제어기를 설계한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.911-917
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network to real-time distributed control system is gaining acceptance in many industries. In order to take advantages of networking, however, the network should be carefully designed to satisfy real-time distributed control. This paper presents an implementation method of closed-loop control using Profibus-FMS. In order to implement a closed-loop control system, we used industrial computers with Profibus-FMS network cards and a DC servo motor. Through various experiments, the step response of the control system with network was compared with the reference response without network.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.116-125
• /
• 2010

In this study, a novel hydraulic energy-regenerative system was presented from its proposal through its modeling to its control. The system was based on a closed-loop hydrostatic transmission and used a hydraulic accumulator as the energy storage system in a novel configuration to recover the kinetic energy without any reversion of the fluid flow. The displacement variation in the secondary unit was reduced, which widened the uses of several types of hydraulic pump/motors for the secondary unit. The proposed system was modeled based on its physical attributes. Simulation and experiments were performed to evaluate the validity of the employed mathematical model and the energy recovery potential of the system. The experimental results indicated that the round trip recovery efficiency varied from 22% to 59% for the test bench.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.282-292
• /
• 2003

In this paper, we evaluate the performance of WCDMA reverse link receiver system with closed loop fast transmit power control (TPC). For fast power control, SIR must be measured precisely. We propose a new SIR measurement algorithm having a simple structure. The proposed algorithm uses unused OVSF code for interference power evaluation. The proposed SIR measurement algorithm is compared to the conventional SIR measurement algorithm in Ref.$^{［1］}$ under closed loop fast TPC. We adopted WMSA channel estimation filter with Κ=2 for mobile radio channel estimation and considered one slot TPC delay. Extensive computer simulation results show that the proposed algorithm using unused OVSF code reduces the required Ε$_{b}$ /Ι$_{0}$ at the BER of 10$^{-3}$ up to 0.9㏈ and has an improved TPC error performance compared to the conventional algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.796-801
• /
• 2002

CL1(closed loop mode 1) is one of the closed loop transmit diversity schemes defined by 3GPP WCDMA and adjusts the relative phases of the transmitted signals at the two transmit antennas, thereby maximizing the power of the received signal at the user equipment. A key component of this scheme is to encode the phase difference between two received signals arrived at the user equipment via two different transmit antennas and to send it back to the base station. This paper proposes a new phase difference representation based on the adaptive delta modulation and compares its performance with the corresponding one of CL1. Computer simulations show that, in a slowly fading environment, the proposed scheme produces more realistic representation of the phase difference than the on of the CL1, resulting in a lower BER.