• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2005

Many case histories of re-liquefaction phenomena seem to support the idea that sand deposits, if they once have been liquefied, could be reliquefied again by a subsequent earthquake even though the earthquake is smaller than the previous one. The magnitude of the strains induced in the initial liquefaction has a significant influence on the resistance of the sample to re-liquefaction. The deposits undergoing liquefaction experience large shear strain during liquefaction. And this previous strain changes the microstructure into highly anisotropic structure such as columnlike structure and connected voids. This type of anisotropy is so unstable that it can reduce re-liquefaction resistance. It is blown that the extent of anisotropic structural change depends on the gradation characteristics of ground. The purpose of this study is to estimate the correlation between the gradation characteristics of the sand and the ratio of re-liquefaction resistance to liquefaction resistance. In this study, 1-g shaking table tests were carried out on five different kinds of sands. During the tests the values of excess pore pressure at various depths and surface settlements were measured. Re-liquefaction resistances were not affected by the initial void ratio and the effective confining pressures, and the deposits of all test sands which had once been liquefied were reliquefied in the cyclic loading number below 1 to 1.5. The ratio of re-liquefaction resistance to liquefaction resistance linearly decreased as $D_{10}/C_u$ increased, and was constant as about 0.2 above the value of $D_{10}/C_u$, 0.15 mm.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Archives of design research
• /
• v.16 no.3
• /
• pp.201-210
• /
• 2003

The world is preparing another unseen war, that is, the cultural war of digital economy which will dominate the new millenium. As the “contents”, which are composed of various ingredients of media, gain vitality, the developed nations are in preparation of the war with the “cultural industry” weapons. The digital economic experts say that the left out nations will become economic colony in the new millenium age. The most important characteristics of cultural industry is the unity of creativity and culture which is all the more improved on the basis of the culture created upon knowledge. This leads to competition between nations or regions, and to survive one has to develop the industrial structure through cognition of its own cultural value. Furthermore, it is not a short-term development and investment of cultural products but a study on the method to graft the cultural value to the industry itself. The multi-media period does not accept an independent medium, and the contents products are becoming the leading industry since il is proved that they last semi-permanently in the digital world. The victory lies in the quality and quantity of the contents as the high ability and variety of the technology of media advance in accordance to the market principles. Since the culture, science and economy are becoming one complex structure, all nations of the world are trying the evolve a unique design of their on culture on the basis of the global universality. In consequence, we should excavate a uniqueness from our cultural heritage and develop into a korean design which will be recognized in the world market. The value of our cultural property should not only be used as academic and research purposes but should be re-evaluated with modem view, recognized as the core element that decides the quality of life and developed into exclusive designs. The korean designs represent the mould concept of our people which evolves from the mould or shape alphabet of Korea To meet the requirements of the changing world and in preparation of the cultural competitive age, it is never too early to make a data on the korean designs through their analysis and evaluation.

• Archives of design research
• /
• v.17 no.2
• /
• pp.77-86
• /
• 2004

User-Centered Design Approach plays important role in dealing with usability issues for developing modern technology products. Yet it is still questionable whether the User-Centered approach is enough for the development of successful consumer contents since the User-Centered Design is originated from the software engineering field where meeting customers' functional requirement is the most critical aspect in developing a software. However, modern consumer market is already saturated and in order to meet ever increasing consumer requirements, the User-Centered Design approach needs to be expanded. As a way of incorporating the User-Centered Approach into the consumer product development, Jordan suggested the 'Pleasure-based Approach' in industrial design field, which usually generates multi-dimensional user requirements: 1)physical, 2)cognitive, 3)identity and 4) social. It is the current tendency that many portal and community service providers focus on fulfilling both functional and emotional needs for users when developing new items, contents and services. Previously fulfilling consumers' emotional needs solely depend on visual designer's graphical sense and capability. However, taking the customer-centered approach on withdrawing consumers' unknown needs is getting critical in the competitive market environment. This paper reviews different types of user research techniques and categorized into 6 ways based on Kano(1992)'s product quality model. Based on his theory, only performance factors, such as suability, can be identified through the user-centered design approach. The user-centered design approach has to be expanded to include factors include personality, sociability, pleasure, and so on. In order to identify performance as well as excellent factors through user research, a user-research framework was established and tested through the case study, which is ' the development of new online service for teens '. The results of the user research were summarized at the end of the paper and the pros and cons of each research techniques were analyzed.

• Archives of design research
• /
• v.17 no.2
• /
• pp.95-104
• /
• 2004

Creativity is a important keyword for users as well as for main design organization who needs it. But little attention has been given to the aspect of user's creativity, also there has been a few attempt to apply it into design development until now. Nowadays in design areas, user's experiences and actions are changing the passive states receiving meanings into the active states creating meanings voluntarily. It is resonable to suppose that creative stage is important for users and they have the possibility of new ideas of uses and creating new productions. User's experiences of objects includes that of being formed or supported previously and that of voluntary interpretations acquired for himself, which it may be the possibilities predicted in design process or unknown user's action areas. It is likely that creative use process by themselves are the actions applied and deviated from usability and function by main design organization, also creative productions are arranged and made by users. These have a scope of examination and research in probability that is occurs frequently in user. In this research, approaching with a term, 'User gestures', User gestures are the characteristic action areas based on user's voluntary behaviors, where are revealed a unessential and non-operational function as a action itself and various transformation and creation of products as a outcome of action. This fact proves clearly that user gestures have a worth of alive spectrum to observe aspects of user culture and could be a attractive approach to seek easily new design concept for designer and developer. A further direction of this study will be following areas, Ethnography methods research of user gestures, Cultural research to phenomenon of user design and UGSBD(User gesture scenario based design) research. And it seems probable that they are applied in design development as follows, User initiative customization products, User participatory recycling products and creativity-experience design.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.65-76
• /
• 2010

Purpose: he use of PET scanners and the number of patient in Korea have been increased for recent several years dramatically. For this reason, technologists have more possibilities to be exposed to the radiation. The hospitals using PET scanners should make an effort to reduce the radiation exposure dose. The purpose of this study was to evaluate the radiation exposure does when using radiation shielding devices. The evaluation was performed through questionnaire survey and experiment. Materials and Methods: First, the technologists who had experience working in PET center in 2008-2009 were surveyed with questionnaire and TLD Figures, personal opinion of utilization of radiation shielding devices are analyzed. Second, we measured the shielding rate of shielding devices which have been using in PET study procedures. We divided the procedures into four steps; distribution, moving, injection of $^{18}F$-FDG and patient setup. Results: First, the results of this survey, using of L-block+Syringe shield, L-block, Syringe shield, No shield during the injection, were each 58.5%, 20%, 9%, 12.3%. The TLD values according to utilization of radiation shield, using both L-block+Syringe Shield and L-block showed the lower TLD values, and Syringe shield only or No shield showed the higher TLD values. Second, the results of experiments according to PET study procedures measured the shielding rates as follows. The shielding rates during the distribution using L-block, L-block+Apron shield were measured 97.4%, 97.7%. The shielding rates during the $^{18}F$-FDG delivery to the injection room using mobile Syringe shield, Syringe holder, Syringe shield carrier were each 81.7%, 98.9%, 99.7%. The shielding rates during the injection using Syringe shield, L-block, L-block+Syringe shield were measured each 51.9%, 98.3%, 98.7%. The shielding rates of Apron were measured in each 30, 60, 90, 120, 150 cm distance. The measurement were each 16.9%, 14.2%, 16.6%, 17.1%, 18.1%, 18.6%. Conclusion: The most effective method for radiation shielding is to using L-block during the $^{18}F$-FDG distribution and Syringe shield carrier during in moving $^{18}F$-FDG. For the $^{18}F$-FDG injection, L-block+Syringe shield have to be used. The shielding effect of Apron has shown average 16.4%. According to the survey of questionnaire, the operators recognized well risk of the radiation exposure but, tended ignore in working. The radiation dose according to recognition of radiation exposure risk was not relevant. but radiation dose according to utilization of radiation shield lower the more use it. The main reason of no use of shielding devices is cumbersome, 55% of the respondents answered. I'm sure, by use of radiation shield in all PET procedure, radiation exposure will be reduced considerably.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.722-727
• /
• 2010

This study was conducted to estimate the carbon footprint and to establish the database of the LCI (Life Cycle Inventory) for barely cultivation system. Barley production system was separated into the naked barley, the hulled barley and the two-rowed barley according to type of barley species. Based on collecting the data for operating LCI, it was shown that input of fertilizer was the highest value of 9.52E-01 kg $kg^{-1}$ for two-rowed braley. For LCI analysis focussed on the greenhouse gas (GHG), it was observed that carbon footprint were 1.25E+00 kg $CO_2$-eq. $kg^{-1}$ naked braley, 1.09E+00 kg $CO_2$-eq. $kg^{-1}$ hulled braley and 1.71E+00 $CO_2$-eq. $kg^{-1}$ two-rowed barley; especially two-rowed barley cultivation system had highest emission value as 1.09E+00 kg $CO_2$ $kg^{-1}$ barley. It might be due to emit from mainly fertilizer production for barley cultivation. Also $N_2O$ was emitted at 7.55E-04 kg $N_2O\;kg^{-1}$ barley as highest value from hulled barley cultivation system because of high N fertilizer input. The result of life cycle impcat assessment (LCIA), it was observed that most of carbon emission from barely cultivation system was mainly attributed to fertilizer production and cropping unit. Characterization value of GWP was 1.25E+00 (naked barley), 1.09E+00 (hulled barley) and 1.71E+00 (two-rowed barely) kg $CO_2$-eq. $kg^{-1}$, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.273-279
• /
• 2010

Purpose: The purpose of this in vitro study was to compare the marginal adaptation of a ceramic-pressed-to-metal restoration with traditional metal-ceramic restoration. Materials and methods: Duplicating the prepared resin tooth, 20 metal dies were fabricated. Twenty metal copings of 2 groups which were metal ceramic restoration and pressed to metal restoration were fabricated. The marginal opening of each coping was measured with Microscope (BX 60M-36E $41D^{(R)}$: Olympus, Japan). After porcelain build-up, the marginal opening of metal ceramic restoration and pressed to metal restoration ($PoM^{(R)}$: Ivoclar vivadent., Liechtenstein) were also evaluated in the same method. The measurements were analyzed using Wilcoxon Signed Ranks test and Mann-Whitney U test. Results: Within the limits of this study, the results were as follows. 1. Metal-ceramic restorations in coping state ($64.93{\pm}12.48\;{\mu}m$) in compared with Metal ceramic restorations after porcelain build-up ($63.43{\pm}12.86\;{\mu}m$) had no significant difference in marginal adaptation. 2. Pressed-metal-ceramic restorations in coping state ($50.00{\pm}12.28\;{\mu}m$) in compared with Pressed metal ceramic restorations after porcelain build-up ($56.72{\pm}13.80\;{\mu}m$) had no significant difference in marginal adaptation. 3. Metal-ceramic restorations in compared Pressed-metal-ceramic restorations had no significant difference in marginal adaptation. Conclusion: Pressed-metal-ceramic restorations have the advantage of being technically less change through using of the lost-wax technique and this allows for the convenience of a full-contour ceramic wax-up as opposed to the more technique-sensitive layering method. Pressed-metal-ceramic restorations may be considered in clinic on the basis of the result of this study and the advantage of this system.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.123-131
• /
• 2009

Purpose: We tested a sample of nuclear medicine workers at Korean healthcare institutions for internal contamination with radioactive isotopes, measuring concentrations and evaluating doses of individual exposure. Materials and Methods: The detection and measurement was performed on urine samples collected from 25 nuclear medicine workers at three large hospitals located in Seoul. Urine samples were collected once a week, 100~200 mL samples were gathered up to 6~10 times weekly. A high-purity germanium detector was used to measure gamma radiations in urine samples for the presence of radioactive isotopes. Based on the detection results, we estimated the amounts of intake and committed effective doses using IMBA software. In cases where committed effective doses could not be adequately evaluated with IMBA software, we estimated individual committed effective doses for radionuclides with a very short half life such as $^{99m}Tc$ and $^{123}I$, using the methods recommended by International Atomic Energy Agency. Results: Radionuclides detected through the analysis of urine samples included $^{99m}Tc$, $^{123}I$, $^{131}I$ and $^{201}Tl$, as well as $^{18}F$, a nuclide used in Positron Emission Tomography examinations. The committed effective doses, calculated based on the radionuclide concentrations in urine samples, ranged from 0 to 5 mSv, but were, in the majority of cases, less than 1 mSv. The committed effective dose exceeded 1 mSv in three of the samples, and all three were workers directly handling radioactive sources. No nurses were found to have a committed effective dose in excess of 1 mSv. Conclusions: To improve the accuracy of results, it may be necessary to conduct a long-term study, performed over a time span wide enough to allow the clear determination of the influence of seasonal factors. A larger sample should also help increase the reliability of results. However, as most Korean nuclear medicine workers are currently not necessary to monitored routinely for internal contamination with radionuclides. Notwithstanding, a continuous effort is recommended to reduce any unnecessary exposure to radioactive substances, even if in inconsequential amounts, by regularly surveying workplace environments and frequently monitoring atmospheric concentrations of radionuclides.