• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.208-212
• /
• 2017

A urinary calculus in the urethra is rarely seen and usually encountered in men with a urethral stricture or diverticulum. Herein, we report a rare case of a giant calculus in the urethra of a 42-year-old male patient with paraplegia after spinal cord injury due to car accident 20 years ago. A recent urologic consultation from the emergency room was performed since the patient had multidisciplinary symptoms during the day without any urination and presented with urinary difficulties due to hematuria and pain symptoms occurring with a mass in the bottom of the testicles. Abdomen and pelvic computed tomography (CT) was performed to examine the tumor mass, which was found to be absent. In addition, urethral stones were observed in the CT. Cystostomy was performed after the first urethroplasty, and the stone was removed from the urethra. Two weeks later, the patient was subjected to urethrography to remove the Foley catheter. No specific finding in voiding was detected. Giant urethral stones sometime require differentiation from tumor status. Treatment may vary according to size and location, requiring careful examination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.628-637
• /
• 2017

The automobile industry has developed Advanced Driver Assistance Systems (ADASs) to prevent traffic accidents and reduce the burden for drivers. One example is the Lane Keeping Assistance System (LKAS), which was developed for automotive vehicle systems for safety and better driving. The main system of the LKAS supports the driver while maintaining the vehicle within a lane. LKAS uses a radar sensor and camera sensor to collect information about the vehicle's position in the lane and send commands to the actuator to influence the lateral movement of the vehicle if necessary. Recently, vehicles equipped with LKAS have become commercially available. Test procedures for international LKAS evaluation are being discussed and developed by international committees, such as the International Organization for Standardization and United Nations Economic Commission for Europe. In Korea, an evaluation of LKASs for car safety is being planned by the Korean New Car Assessment Program. Therefore, test procedures should be developed for LKASs that are suitable for the domestic road environment while accommodating international standards. We developed a test scenario for LKASs and propose a formula for obtaining the target relative distance. To validate the methods, a series of experiments were conducted using commercially available vehicles equipped with LKAS.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.537-542
• /
• 2017

Aggressive driving is a major cause of car accidents. Previous studies have mainly analyzed young driver's aggressive driving tendency, yet they were only done through pure clustering or classification technique of machine learning. However, since elderly people have different driving habits due to their fragile physical conditions, it is necessary to develop a new method such as enhancing the characteristics of driving data to properly analyze aggressive driving of elderly drivers. In this study, acceleration data collected from a smartphone of a driving vehicle is analyzed by a newly proposed ECA(Enhanced Clustering method for Acceleration data) technique, coupled with a conventional clustering technique (K-means Clustering, Expectation-maximization algorithm). ECA selects high-intensity data among the data of the cluster group detected through K-means and EM in all of the subjects' data and models the characteristic data through the scaled value. Using this method, the aggressive driving data of all youth and elderly experiment participants were collected, unlike the pure clustering method. We further found that the K-means clustering has higher detection efficiency than EM method. Also, the results of K-means clustering demonstrate that a young driver has a driving strength 1.29 times higher than that of an elderly driver. In conclusion, the proposed method of our research is able to detect aggressive driving maneuvers from data of the elderly having low operating intensity. The proposed method is able to construct a customized safe driving system for the elderly driver. In the future, it will be possible to detect abnormal driving conditions and to use the collected data for early warning to drivers.

• Korean Security Journal
• /
• no.39
• /
• pp.269-294
• /
• 2014

Korea is concerned with information security industry due to recent leak-out private information of 3 card companies. Executives are aware of damage from breach of security such as personal data spill, is more dangerous than any other financial risks. The information security industry, which was limited in physical security and network security formerly, is evolving into convergence security of public and facility security industry. The field of interest has also been changed into security of smart phone and intelligence image recently, from firewall or Anti-virus. The convergence security is originally about access control of facility, but recently its demand has been increased mostly by public institutions and major companies. The scope of the industry also varies from finance, education, distribution, national defense, medical care to automobile industry. The market of convergence security has been expanded and new various products and services of security of intelligent vehicle, 'U' healthcare, finance, smart grid and key industries are also developed. It is required to create and enhance of new curriculum and cultivate human resources for the development of knowledge information security industry. Raising standard of education and security consciousness of the nation is also necessary to strengthen the global competitiveness.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.89-98
• /
• 2013

Purpose: The assessment of trauma patients in the prehospital setting is difficult, but appropriate field triage is critical to the prognosis of trauma patients. We sought to evaluate the triage given by the emergency medical technicians (EMTs) using the trauma score to patients injured in motor vehicle collisions (MVCs). Methods: From June 2012 to July 2012, questionnaires were distributed to EMTs, who had transported injured patients to the study hospital. Scene records, photos of the damaged vehicle, and ambulance run sheets were used to provide physiologic, physical, and mechanistic information about the MVC. To evaluate the appropriateness of the injury assessment by EMTs, we compared their impressions with the hospital's final diagnosis within a 3 level triage system comprising both the maximum abbreviated injury scale (MAIS) and the injury severity score (ISS). Kappa (k) was calculated to evaluate the agreement between the triage by EMTs and the triage based on hospital's final diagnosis. Results: A total of 91 patients were analyzed by 31 EMTs. The percentage of males was 57.1%, the mean age was 44.5, and the mean MAIS and ISS were 2.7 and 16.6 respectively. While EMTs correctly diagnosed patient injuries to the extremities in 35.7%, and to the neck in 32.1%, pelvic injuries were missed in 80.0%. The agreement between the triage by the EMTs and the triage based on the hospital's final diagnosis was 62.6%(k=0.366) by the MAIS and 50.5%(k=0.234) by the ISS. The kappa value was higher in EMT-I than in EMT-II. Conclusion: In MVC, the assessment of injured patients by EMT-I was more appropriate, and the 3-level triage method based on the MAIS could contribute to a more accurate triage. Prospective studies to search for appropriate methods of field triage are required for programming practical education for EMTs.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.22-27
• /
• 1997

특정 제품이 가진 "감성 이미지"란 그 제품의기능과 함께 제품의 감각적 요소 그리고 사용자가 제품에 대해 가진 개념적인 사고 과정의 산물이다. 감성이미지의 국제 비교 연구는 사용자가 특정 제품에 대해 가지고 있는 이미지를 국가나 문화의 맥락 속에서 상호 비교 평가하여, 각 국가나 사회집단을 특팅지울 수 있는 문화적 감성 요소를 추출하고자 하는 것이다. 즉, 각 국가의 생활문화 속에서 사용자들이 제품에 대해 가지는 감성이미지를 계량적으로 규명하고 비교 평가하며, 이 정보를 기초로 각국의 문화와 정서에 적합한 제품 디자인의 모형을 제시하는데 본 연구의 목적이 있다. 구체적인 연구방법은 우선, 자동차 제품을 중심으로 '제품 이미지'를 나타내는 '언어 이미지'스케일을 각 문화 집단 별로 구성한다. 이 제품 이미지에 대비하여, 감성적 요소로 선정된 표준 색채 스케일을 중심으로 나타난 집단의 '이미지'를 상호 비교 평가한다. 이 경우, 각 국가별 집단에서 특징적으로 나타나는 제품의 주요 특성이 감성 이미지로 표현되는 색채 이미지에 어떻게 반영되는가를 상호 비교한다. 이 연구에서는 특정 지역의 사람들이 제품에 적용하는 감성이미지는 색채나 기타 감성 요소에 대한 선호의 문제가 아니라 그 집단의 사람들이 그 제품을 통해 표현하고자 하는 사회적 표상의 반영이라는 것을 보여준다. 따라서, 제품의 이미지가 각 국가별로 공유되는 감성 이미지로 변환되기 위해서는 동일한 의미나 상징성을 지닌 감성 요소를 활용하여 그 제품의 이미지를 포장할 수 있는 방법을 적용하는것이다. 본 연구에서는 각 문화 집단들이 특정 제품에 대해 가지고 있는 사회적 표상(social representation) 체계를 색채스케일에서 나타난 감성 이미지를 통해 구체화하는 것이다.로서는 방전효율의 저하가 없는 양호한 성능을 보였으며, SC의 시범 작동시험을 실차(소나타 1800cc)에 장착하여 수행한 결과 20회 이상의 연속시동에서도 아무런 문제점 없이 잘 동작하였다.되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the le

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.58-62
• /
• 2007

Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.38-43
• /
• 2010

The purpose of this study is to secure the basis for judgment on the cause of an accident by analyzing the melting characteristics of a blade type fuse used for vehicles due to overload. In order to increase the reliability of the test, it was conducted by connecting the electrical system with conditions similar to those of an actual vehicle to apply the load. Carbonization pattern experiment of fuse by outside flame applied Korean Standard (KS). The fuse melted by the overcurrent showed a smooth cross-section while the test terminals, clear plastic body, etc., burnt out by the external flame was badly deformed. When 185% of the rated current (27.8A) was applied to a cable of 15A rated current onto which an over-capacity fuse (20A) was installed, the fuse melting time was 217 seconds. In addition, when a load current of 28.8[A] (139%) was applied, the fuse's test terminal and terminal blade were not burnt out although foam was observed on some parts of the plastic body. When a load capacity of 28.2[A] (141%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melting time was approximately 10 seconds. When a load current of 35.8[A] (119%) was applied, the fuse's test terminal and terminal blade were not burnt out, although some parts of the plastic body was swelled. However, it was observed that the switch terminal melted if approximately six minutes lapsed under such conditions. When a load capacity of 39.4[A] (131%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melted in approximately 69 seconds, and the test terminal and terminal blade were not burnt.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.

• Journal of the Korean Institute of Gas
• /
• v.14 no.6
• /
• pp.15-20
• /
• 2010

Compressed Natural Gas (CNG) buses have been supplied since the year 2000 in order to resolve severe atmospheric pollution in metropolitan area and contributed on the improvement of urban atmospheric environment. However, it is indispensible to take an adequate measure to guarantee the safety of CNG vehicles because of the possibility of huge fire accident. A receptacle, connecting device between high pressure fuel supply tank and fuel line, plays an important role in CNG supply system. In recent, leakage of CNG from receptacles has been reported. So, the concern about the security and reliability of receptacles has been arisen. Therefore, a lot of efforts to prevent leakage are invested among researchers and the durability of this component should be guaranteed despite repeated operation. This research has performed durability tests of a CNG receptacle regarding the repeated usage, extreme chattering, and continuous full flow test. Although a receptacle used for CNG vehicle satisfies validation requirements in the test results, it has been found that failure in the function of leakage prevention in a receptacle could take place in the case of prolonged exposure to high supply pressure in common quick charging environment on site.