• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.71-79
• /
• 2020

As the urbanization trend in modern society continues, the concentration of the population induces the urban problems in the residential area. One of the well-known issues among various urban problems is the garbage problem, which causes deterioration of the residential environment of citizens and directly affects the satisfaction of municipal administration. Such garbage problem cannot be accurately predicted by analyzing the amount of waste emitted from residential areas, but it is necessary to analyze the lifestyle and characteristics of residents living in residential areas. In this study, we propose an agent-based residential modeling and simulation environment using discrete event system formalism to analyze the garbage problem and satisfaction level according to the distribution of residents in the residential area. To model the behavior of the residents, we utilized the Atomic Model to capture the temporal behavior. Also, we used the Coupled Model to model the multi-family and the building to enhance the reusability of the simulation model. Also, this study carried out simulation modeling and simulation for a multi-family residential area. The simulation results of the multi-family housing area show that considering the characteristics of the residents gives better results compared to the simulation results without considering the characteristics.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.1
• /
• pp.80-104
• /
• 2016

Existing methodologies of technology planning about promising new technology focused on target technology itself, so it is true that socio-environmental context which the relevant technology has influence on is not well understood. In this respect, this study is aimed to questingly examine that news content analysis methodologies widely available in the field of science communication can be applied as a complementary methodology for contextual understanding of socio-environment in terms of technology planning about promising new technology. In the co-evolutionary environment of technology-society, promising new technology shows hype phenomenon regarding the relation with the society. Based on this, this study performed news content analysis and examined if the consequences of analysis would match hype cycle. It tried to explore substantive content understanding by socio-environment factors according to specific news frame content. To do this, new content analysis was performed targeting cloud computing as a representative promising new technology. The result of news content analysis targeting general newspapers, business news, IT special newspapers revealed that the tendency of news reporting matched the trend of hype cycle. Particularly, it was verified that reporting attitude and news frame analysis provided useful information to understand contextual content depending on social, economic, and cultural environment factors about promising new technology. The results of this study implied that news content analysis could overcome the limitation of technology information analysis focusing on academic journal patent usually applied for technology planning and could be used as a complementary methodology for understanding the context depending on macro-environment factors. In conclusion, application of news content analysis on the phase of macro-environment analysis of technology planning could contribute to the securement of mutually balanced view in the co-evolutionary perspective of technology-society.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.234-240
• /
• 2006

The purpose of this study was to evaluate microbiologically cooking utensils, equipment employees, and environment in 12 large Korean, Western, Chinese, and Japanese restaurant. Microbiological testing was conducted for pathogens including E. coli, Samolnella, L. monocytogenes, S. aureus, E. coli O157:H7, V. parahaemolyticus, B. cereus, and Y. enterocolitica as well as total plate count and coliforms. The results showed cooking water and drinking water in some Korean restaurants and drinking water in some Western and Japanese restaurants were unsatisfactory, especially, barley tea, which was cooled after being boiled, was unsatisfactory. Most cooking utensils such as knives, cutting boards, kitchen towels, tongs, and basket had total plate and coliforms count in excess of standards, and knives and cutting boards at some Chinese restaurant had E. coli. At some restaurant, S. aureus was found on some food worker's hands. Also, the total plate count of the air showed a high count around worktables, inside the refrigerator, and in the kitchen in most restaurants. These result suggest that sanitation needs improvement in the environments in these foodservice establishment.

• Journal of Internet Computing and Services
• /
• v.9 no.6
• /
• pp.155-163
• /
• 2008

Project Monitoring and Control is one of the required activities in project management. This activity provides the information about whether a project is making a progress as it is planned. It is usually performed in weekly meetings or milestone meetings where the project manager checks the project's current status based on project measures such as schedule, cost and work performance. One of the popular method for project monitoring and control is EVM(Earned Value Management). The major characteristic of EVM is that it uses only one measure 'cost' for schedule and work performance so that it enables 2 independent graphs to be illustrated in one integrated graph based on cost. For applying EVM to a project, it is essential to break whole work to work packages and to assign value of cost to each work package at the initial stage of the project. Therefore EVM is well matched with the lifecycle which requires whole plan at the beginning of project. However, in XP(eXtreme Programming), whole customer requirements are difficult to define and to make a complete plan at the beginning and are more detailed in each Iteration. Therefore EVM is not comfortable method for XP. Therefore in this research we suggest 3 layer EVM which can be applied in XP, and develop a process guidelines based on CMMI(Capability Maturity Model Integration) PMC(Project Monitoring and Control) process area.

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.169-173
• /
• 2009

A survey of total aflatoxin levels was conducted on 145 samples(carthamiflos, thujae semen, giycyrrhizae radix et rhizoma) collected in Yakyeang markets in Seoul. Aflatoxin levels were quantified by the immunoaffinity column clean-up method followed by performance liguid chromatography(HPLC)-fluorescence detector(FLD). Aflatoxins were found in 10(6.9%)samples including 5 Arecae semen, 4 Thujae semen, 1 Zizyphi semen with a range of $0.45{\sim}79.15\;{\mu}g/kg$. Generally These results show that the contamination level of aflatoxins in Herb Medicines consumed in Korea is high compared with the standard in Korea Herb Medicine Code($10\;{\mu}g/kg$ as aflatoxin B1). It is considered that aflatoxin concentration was increased in herb medicines during a storage and drying in herb medicines examined

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.575-579
• /
• 2006

The land use in suburban area has been changed rapidly due to the urban expansion in Korea during the last few decades. And such land use changes result in various environmental problems such as biodiversity decrease, habitat fragmentation, air pollution and urban heat island. Remote Sensing (RS) and Geographical Information Systems (GIS) can be used for land cover change detection to understand the impact and trend of the land use change. Change detection is the process of identifying differences in the state of an object or phenomenon by observing it at different times and it can provide quantitative and comparative information for the land use/cover change. RS is less expansive than field survey for producing land use maps, and can be accessed quickly and repetitively for large area. Also it can be used for change detection using multi-temporal land use/cover by accumulated data. Therefore, the purpose of this study is to detect and quantitatively evaluate urban land cover change in urban stream watershed area for the last few decades and ultimately to provide the basic data for urban land use planning and management.

• Journal of Wetlands Research
• /
• v.24 no.1
• /
• pp.59-67
• /
• 2022

The interest in LID facilities is increasing worldwide for recovery of natural water cycle system to destroy by urbanization. However, problems are raised when installation of LID because comprehensive analysis about design capacity adequacy of LID facilities was not conducted completely. In this research, removal efficiency and design volume adequacy of LID facilities were analyzed based on rainfall monitoring data in four LID facilities(Vegetated Swale, Vegetative Filter Strip, Bio-Retention and Permeable Pavement). As a result, group of LID facility designed on WQV was shown higher flow(37%) and pollutants(TSS, BOD, TN and TP) removal efficiencies(20 ~ 37%) than group of LID facility designed on WQF. SA/CA graph was drawn for evaluation of design volume adequacy based on rainfall monitoring data. In this SA/CA graph, coefficient of determination show over 0.5 in all parameter, especially, Flow and TP were show over 0.95. And, 'SA/CA & L/CA' graph considering difference of structure mechanism in LID facility suggested in this research was confirmed that improved coefficient of determination in flow, TSS and TP than SA/CA graph. According to this research results, feasibility of applying 'SA/CA & L/CA' graph for evaluation of design volume adequacy in LID facility, and it is necessary to follow up research for generalization and normalization.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.562-568
• /
• 2021

Seat reservations and civil complaints in the library reading room have been done face-to-face by managers, and efficient management has been difficult. In addition, there is a problem that it is difficult to take action in the event of a civil complaint due to user inconvenience, such as a noise problem between users in the reading room. In this study, an online reservation system was developed for efficient management of seats in the library reading room so that it could be serviced non-face-to-face. In addition, when using the library reading room, it is possible to apply for non-face-to-face civil complaints when complaints occur due to noise problems between users, loss of belongings, and snoring during the user's sleep. Managers can smoothly manage library reading rooms through non-face-to-face inconvenience reports. It is possible to increase the satisfaction of using the library by resolving the inconvenience of users. The developed service app allows seat reservations and anonymous inconvenience reports. The administrator can check the received inconvenience report and warn the user of the seat with an IoT sensor-based LED. When corrective action is completed, the result of the action may be fed back to the reporter.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.150-169
• /
• 2020

Surveys of Buddhist ruins at Namsan in Gyeongju began in earnest during the Japanese colonial era, undertaken by Japanese scholars. These surveys of Buddhist remains in Namsan made during the colonial period should be seen as previous research which cannot be ignored in any in-depth study of Buddhist ruins in Gyeongju. Full-scale surveys of Buddhist ruins at Namsan began in the 1920s. Previous surveys conducted around the time of the Japanese annexation of Korea in 1910 are generally viewed as only representing preliminary investigations and, thus, have not received much attention. However, these early surveys are significant in that they led to the Buddhist ruins on Namsan becoming widely known in the 1910s and served as the foundations for later studies. The removal of the Seated Medicine Buddha from Samneung Valley in Gyeongju in 1915 and its subsequent exhibition at the Joseon Local Products Expo, which marked the fifth anniversary of the Japanese administration of Korea, was especially important in garnering attention for Namsan's wealth of Buddhist artifacts, as the statue was placed in the main hall of the art museum and attracted a great deal of interest from visitors. It is typically thought that this Seated Medicine Buddha was exhibited in 1915 because it was the most beautiful and well-preserved statue from Namsan. However, the removal of this statue was closely related to the proposed move of the Seokguram statue to Seoul around the time of Korea's annexation. The plan to move Seokguram to Seoul was primarily devised by Terauchi Masatake, and the plan, based on Ilseontongjo-ron ('日鮮同祖論'), a historical theory that prehistoric Korean and Japanese people were of the same blood, and Joseon Jeongcheasoeng-ron ('朝鮮停滯性論'), a historical theory arguing that development had stagnated in Korea, was intended to be a visual demonstration of a new era for Korea. This new era was to proceed under the rule of the Japanese Empire through the dissolution of Gyeongbokgung, the symbol of the Joseon Dynasty, which would be replaced with past glories as symbolized by the statue of Buddha. However, as the plan floundered, the replacement for Seokguram in Seoul ended up being none other than the Seated Medicine Buddha of Samneung Valley. Surveys of the Seated Medicine Buddha began in 1911, administered by Sekino Tadashi, but he likely learned of the statue's location from Moroga Hideo or Kodaira Ryozo, Japanese residents of Gyeongju. It is also probable that these Japanese residents received a request from the Japanese Government General of Korea to find a Buddha statue that was worthy of being displayed at exhibitions. In this way, we can say that the transfer of the Seated Medicine Buddha to Seoul was the result of close cooperation between the Government General, Sekino Tadashi, and Japanese residents of Gyeongju. This also had the effect of removing the magical veil which had shrouded the Buddhist ruins of Namsan. In other words, while the early surveys of Buddhist ruins on Namsan are significant, it is difficult to argue that the surveys were undertaken for purely academic purposes, as they were deeply related to the imperial ambitions of Governor-General Terauchi which encompassed the plans to move Seokguram to Seoul and the successful hosting of the 1915 Expo. It should also be pointed out that the failure of the plan to move Seokguram to Seoul and the preservation of the Seated Stone Buddha of Mireuggok at Namsan was in no small part due to resistance from Korean residents in Gyeongju. Although it is not described in detail in the paper, research is needed which shows that the Korean residents of Gyeongju were not simple bystanders, but agents of history.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.587-594
• /
• 2017

The construction industry generates the greatest number of disasters. Laborer injury at construction sites is mostly reported by small and mid-sized construction sites. Moreover, of the injuries, the greatest number is related to formwork. The objective of this study is to propose a checklist of the risk factors of formwork, in which industrial injuries occur most frequently in small and mid-sized construction sites, with which safety management can be done thoroughly. Risk factors and preventive measures are derived by analyzing 9,396 industrial disasters occurring at construction sites in Korea. The checklist drawn in this study was reviewed by five specialists in safety management, and applied to construction sites to verify its applicability. In a result, applying the checklist to the site showed that the safety management system of small and medium-sized construction sites were insufficient. It is expected to contribute to the effective safety management of small and mid-sized construction sites.