• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.11-18
• /
• 2013

Since 1996, Korean National Police Agency has been promoting a project for installation of Automated Speed Enforcement (ASE) system aiming at reduction of accidents. The number has increased to 5,348 stations throughout country as of December 2012. Recently, the Section Speed Enforcement Systems have been installed at many sites to produce a general effect well beyond the localised effect at overt fixed camera sites. In this study aims, we have analyzed the effects of the Section Speed Enforcement System at the Misiryeong tunnel section. We have found that there were a statistically significant 21.4%~31.% reduction of the average speed and 45.9% reduction in a number of traffic accidents per month. Accordingly, the study indicates that the Section Speed Enforcement Systems at Misiryeong tunnel section has effective to produce road safety.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.394-405
• /
• 2009

Statement of problem: Crestal bone loss, a common problem associated with dental implant, has been attributed to excessive bone stresses. Design of implant's transgingival (TG) part may affect the crestal bone stresses. Purpose: To investigate if concavely designed geometry at a dental implant's TG part reduces peri-implant bone stresses. Material and methods: A total of five differently configured TG parts were compared. Base model was the ITI one piece implant (Straumann, Waldenburg, Switzerland) characterized by straight TG part. Other 4 experimental models, i.e. Model-1 to Model-4, were designed to have concave TG part. Finite element analyses were carried out using an axisymmetric assumption. A vertical load of 50 N or an oblique load of 50 N acting at $30^{\circ}$ with the implant's long axis was applied. For a systematic stress comparison, a total of 19 reference points were defined on nodal points around the implant. The peak crestal bone stress acting at the intersection of implant and crestal bone was estimated using regression analysis from the stress results obtained at 5 reference points defined along the mid plane of the crestal bone. Results: Base Model with straight configuration at the transgingival part created highest stresses on the crestal bone. Stress level was reduced when concavity was imposed. The greater the concavity and the closer the concavity to the crestal bone level, the less the crestal stresses. Conclusion: The transgingival part of dental implant affect the crestal bone stress. And that concavely designed one may be used to reduce bone stress.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.102-107
• /
• 1999

Several ingredients of kimchi including chinese cabbage, garlic, leek, big green onion, and small green onion were assayed for their chitinase activities. Kimchi with various leek contents (4, 8, 12%) were fermented at 15$^{\circ}C$ for 9 days and the chitinase (EC 3.2.1.14) activity and textural properties were determined. The chitinase activity of the ingredients was in the order of garlic>leek>small green onion>chinese cabbage>big green onion. During fermentation, the chitinase activity of kimchi juice appeared more prominent than that of kimchr tissue, however, it was decreased in all kimchi samples among which the control sample showed a remarkable drop. The activity of chitinase in kimchi tissue increased until 3rd or 5th day of fermentation and then decreased. The puncture force of all kimchi samples decreased and those of leek-added kimchi were higher than those of control. The above results suggested that the addition of leek for kimchi preparation could contribute to the improvement of textural qualities of kimchi due to chitinase activities of leek during fermentation.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.42-47
• /
• 1999

This study considers pseudosteady-state flow to a restricted-entry well in a single or multilayer aquifer with crossflow. A simple method for calculating the pseudoskin factor caused by partial penetration is presented to overcome a limited applicability in geometrical or computational aspects of previous methods. The computation is based on the solution of a simplified pseudosteady-state equation that describes the long-time behavior of the closed radial system. We illustrate the applicability of this method to various types of cylindrical systems and provide the results graphically. Comparisons with previously published results have indicated that this method yields highly accurate estimates of pseu-doskin factor with minimum computational effort. This method has also shown to be particularly useful for geometrically-complicated systems. Greatly improved computational efficiency of pseudosteady-state approach permits the engineer to easily account for the effect of partial penetration on the late-time performance of a well.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.384-392
• /
• 2017

A linear explosively formed penetrator(LEFP) is a modification of the explosively formed penetrator(EFP). An EFP is axisymmetric and has a dish-shaped liner while LEFP has a rectangular-shaped liner with curved cross section. Upon detonating LEFP forms laterally wide projectile like blade, leaving a long penetration hole on the target. On the other hand, a long-rod tungsten heavy alloy(WHA) penetrator is one of the major threats against most of the ground armored vehicles. In this paper, the feasibility of using an LEFP in protecting against a long-rod WHA penetrator by colliding LEFP into the threat was investigated through a set of numerical simulations. In this study, a scale-down WHA penetrator with length to diameter ratio(L/D) of 10.7 and 7.0 mm diameter was used to represent a long-rod WHA penetrator. LS-DYNA and Multi-Material ALE technique were employed for the simulation. For estimation of the protection effect by LEFP, residual penetration depths into RHA by the threat were compared according to various impact locations against the threat.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.132-132
• /
• 2010

3-5족 화합물 반도체는 직접천이형 반도체이며, 여러가지 우수한 특성으로 인하여 고효율의 태양전지물질로 각광을 받고 있다. 또한 3중접합 구조를 이용한 집광형태양전지의 경우, 40% 이상의 높은 효율을 보인다고 보고 되고 있다. 이러한 고효율 태양전지를 실리콘 기판위에 성장할 경우, 대면적에서의 태양전지제작이 가능해지며, 단가절감이 가능할 것이라고 예상된다. 하지만, 하부셀로 사용되는 게르마늄과 실리콘의 4.2%의 격자상수차이로 인하여, 고품질의 게르마늄 박막을 실리콘 기판위에 성장하는 데에 있어서 많은 문제점이 있으며, 이러한 문제점을 극복하기 위하여, 저온에서 성장한 게르마늄 박막을 완충층으로 사용하는 2단계 성장법이 제안되었다. 하지만, 2단계 성장법에서 저온 완충막의 성장조건이 게르마늄 박막에 미치는 영향은 명확하지 않다. 본 연구팀은 초고진공 화학기상증착법을 이용하여 순수 게르마늄 박막을 실리콘 기판 위에 성장하였으며, 저온 완충막의 두께를 20 nm에서 120 nm까지 변화시켜서, 완충막의 두께가 게르마늄박막에 미치는 영향에 대해서 연구해 보았다. 그 결과, 40 nm이하의 두께를 갖는 완충막을 사용할 경우, 박막 내부에 실리콘 게르마늄을 형성하면서, 거친 표면이 형성되었다. 반면에, 40 nm보다 두꺼운 완충막을 사용할 경우 평탄한 표면을 갖는 순수게르마늄박막이 형성되었다. 이를 통해서, 순수 게르마늄박막 성장을 위해서는 일정 두께 이상의 저온 완충막이 사용되어야함을 알 수 있었다. 또한 게르마늄박막의 관통 전위 밀도를 분석해 본 결과 완충막의 두께가 80 nm까지 두꺼워짐에 따라서 초기에는 관통전위밀도가 $1.2\;{\times}\;10^6\;cm^{-2}$ 까지 감소하는 경향을 보였으나, 완충막의 두께가 더욱 증가할 경우 관통전위밀도가 증가하였다. 이러한 결과를 바탕으로 저온 완충막의 두께를 조절함으로써 최적화된 게르마늄의 성장이 가능함을 확인할 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.59-67
• /
• 2016

Numerical simulations have been performed to investigate thrust characteristics of a through-type pintle nozzle with or without flow separation at various operating altitudes. The low Reynolds number $k-{\varepsilon}$ with compressibility correction proposed by Sarkar are applied. The detail flow structures are observed and static pressures along nozzle wall are compared with experimental results. The flow separation in the pintle nozzle disappears and jet plume strongly expands as its operating altitude increases. To evaluate the thrust characteristics, the momentum term and pressure term of thrust are analyzed. Thrust and thrust coefficient at altitude 20 km are about 10% more than them at the ground 0km.

• Journal of Veterinary Clinics
• /
• v.14 no.1
• /
• pp.75-77
• /
• 1997

Holstein 우유가 식욕감소와 함께 갑자기 유량이 줄어들고 복부의 타진시 심한 통증과 신음을 나타내어 방사선 및 초음파로 확인하였는데, 방사선 투시소견(fluoroscopy)상 길이 10cm의 직선형 금속성이물이 제2위벽을 관통하여 있었으며 초음파상으로는 제2위벽의 장막과 횡격막의 유착을 관찰하였다. 금속성 이물을 제거하기 위하여 탐색적 개복술을 실시 하였으나 복부의 심한 섬유소성 유착으로 이물을 제거하지 못하고 magnet와 항생제 및 수액을 실시 하였는데 수술후 점차 식욕 및 유량을 회복하였다. 대동물에서는 창상성 복막염에 대한 방사선 투시 및 초음파의 진단과 magnet등의 투여가 매우 유익한 방법이었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.5
• /
• pp.588-595
• /
• 2024

The performance of a shaped charge bomb depends on the explosive performance, liner precision machining and manufacturing quality. The key performance is how uniformly the liner transforms into a jet. In order to reduce the performance of the shaped charge bomb from a protection point of view, this study investigated the characteristics of the jet formation and progression by inserting inhibitors of different shapes into the liner using flash X-ray experimental analysis techniques. The larger the volume filled inside the liner, the lower the rate of high-speed jet generation, which was well confirmed by experiments. Due to the effect of the inhibitor, it takes a considerable amount of time delay to form a jet after explosion compared to a normal shot, and quantity and mass of jet particles that can contribute to penetration are decreased, and the penetration power is also greatly reduced due to the scattering of segmented jets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.542-547
• /
• 2013

In this study, mechanical property on the composite material of aluminum foam core is investigated by simulation analysis. Impact energies such as 50J, 70J, and 100J are applied to the specimen model. The maximum load occurs at 3.4ms for 50J, 3.2ms for 70J, and 3.2ms for 100J respectively. The striker penetrates the upper face sheet, causing the core to be damaged at 50J test but the lower face sheet remains intact with no damage. It results in occurring with the energy of 52 J. At 70J test, it penetrates the upper face sheet and penetrated the core. And the striker causes the lower face sheet with damage. And it results in occurring with the energy of 65 J. Finally at 100J test, the striker penetrated both the upper face sheet and core and even the lower face sheet. The load becomes maximum at the time when striker penetrates through the upper plate and it rapidly reduced. And then the load increases rapidly when reaching the lower face sheet. And it decreases again. It results in occurring with the energy of 95 J.