• 열처리공학회지
• /
• 제20권6호
• /
• pp.299-305
• /
• 2007

The effect of spray deposition of oxide particles on oxidation behaviors of as-cast Mo-14.2Si-9.6B (at%) alloys at $1200^{\circ}C$ up to for 100 hrs has been investigated. Various oxide powders are utilized to make coatings by spray deposition, including $SiO_2,\;TiO_2,\;ZrO_2,\;HfO_2$ and $La_2O_3$. It is demonstrated that the oxidation resistance of the cast Mo-Si-B alloy can be significantly improved by coating with those oxide particles. The growth of the oxide layer is reduced for the oxide particle coated Mo-Si-B alloy. Especially, for the alloy with $ZrO_2$ coating, the thickness of oxide layer becomes only one fifth of that of uncoated alloys when exposed to in air for 100 hrs. The reduction of oxide scale growth of the cast Mo-Si-B alloy due to oxide particle coatings are discussed in terms of the change of viscosity of glassy oxide phases that form during oxidation at high temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.381-381
• /
• 2010

$(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility inachieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFET channel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric films on p-Si (100) were grown by atomic layer deposition method, for which the conduction band offsets, valence band offsets and band gapswere obtained by using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy. The band gap, valence and conduction band offset values for $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric thin film, grown on Si substrate were about 5.34, 2.35 and 1.87 eV respectively. This band alignment was similar to that of $ZrO_2$. In addition, The dielectric function (k, $\omega$), index of refraction n and the extinction coefficient k for the $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films were obtained from a quantitative analysis of REELS data by comparison to detailed dielectric response model calculations using the QUEELS-$\varepsilon$(k, $\omega$)-REELS software package. These optical properties are similar with $ZrO_2$ dielectric thin films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.134-134
• /
• 2011

High-k dielectric materials such as $HfO_2$, $ZrO_2$ and $Al_2O_3$ increase gate capacitance and reduce gate leakage current in MOSFET structures. This behavior suggests that high-k materials will be promise candidates to substitute as a tunnel barrier. Furthermore, stack structure of low-k and high-k tunnel barrier named variable oxide thickness (VARIOT) is more efficient.[1] In this study, we fabricated the $WSi_2$ nanocrystals nonvolatile memory device with $SiO_2/HfO_2/Al_2O_3$ tunnel layer. The $WSi_2$ nano-floating gate capacitors were fabricated on p-type Si (100) wafers. After wafer cleaning, the phosphorus in-situ doped poly-Si layer with a thickness of 100 nm was deposited on isolated active region to confine source and drain. Then, on the gate region defined by using reactive ion etching, the barrier engineered multi-stack tunnel layers of $SiO_2/HfO_2/Al_2O_3$ (2 nm/1 nm/3 nm) were deposited the gate region on Si substrate by using atomic layer deposition. To fabricate $WSi_2$ nanocrystals, the ultrathin $WSi_2$ film with a thickness of 3-4 nm was deposited on the multi-stack tunnel layer by using direct current magnetron sputtering system [2]. Subsequently, the first post annealing process was carried out at $900^{\circ}C$ for 1 min by using rapid thermal annealing system in nitrogen gas ambient. The 15-nm-thick $SiO_2$ control layer was deposited by using ultra-high vacuum magnetron sputtering. For $SiO_2$ layer density, the second post annealing process was carried out at $900^{\circ}C$ for 30 seconds by using rapid thermal annealing system in nitrogen gas ambient. The aluminum gate electrodes of 200-nm thickness were formed by thermal evaporation. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer with HP 41501A pulse generator, an Agillent 81104A 80MHz pulse/pattern generator and an Agillent E5250A low leakage switch mainframe. We will discuss the electrical properties for application next generation non-volatile memory device.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.298-302
• /
• 2023

In this paper, we discussed the effect of field plate dielectric materials such as silicon dioxide (SiO₂), aluminum oxide (Al₂O₃), and hafnium oxide (HfO₂) on the breakdown characteristics of β-Ga₂O₃ Schottky barrier diodes (SBDs). The breakdown voltage (BV) of the SBDs with a field plate was higher than that of SBDs without a field plate. The higher dielectric constant of HfO₂ contributed to the superior reduction in electric field concentration at the Schottky junction edge from 5.4 to 2.4 MV/cm. The SBDs with HfO₂ field plate showed the highest BV of 720 V, and constant specific on-resistance (R_on,sp) of 5.6 mΩ·cm², resulting in the highest Baliga's figure-of-merit (BFOM) of 92.0 MW/cm². We also investigated the effect of dielectric thickness and field plate length on BV.

• 한국진공학회지
• /
• 제19권2호
• /
• pp.141-147
• /
• 2010

$Al_2O_3$, $TiO_2$, $HfO_2$와 같은 high-k (고 유전상수) 산화물 박막을 Si, $SiO_2$/Si, GaAs 기판에 각각 입혀서 주기적인 온도변화에 의해 발생되는 박막 표면에서의 반사율 변화를 이용한 열-반사율법을 이용하여 열전도도를 측정하였다. 그 결과, 약 50nm 두께에서 0.80~1.29 W/(mK)와 같은 높은 열전도도를 가지고 있어 CMOS와 메모리 디바이스와 같은 전자 회로에서 발생되는 열을 효과적으로 방산할 수 있고, 또 미세 입자의 크기에 따라 열전달이 변화하는 것을 확인하였다.

• 한국진공학회지
• /
• 제21권5호
• /
• pp.273-278
• /
• 2012

현재 Hf (Hafnium)을 기반으로한 게이트 유전체의 연구는 여러 분야에서 다양하게 진행되어져 왔다. 이는 기존의 $SiO_2$보다 유전상수 값이 크고, 또한 계속되는 scaling-down 공정에서도 양자역학적인 터널링을 차단하는 특성이 뛰어나기 때문이다. MOSFET 구조에서 유전체 박막의 두께 감소로 인한 전기적 특성 저하를 보완하기 위해서 high-K 재료가 대두되었고 현재 주를 이루고 있다. 그러나 현재까지 $HfO_2$에 대한 nano-mechanical 특성 연구는 부족한 상태이므로 본 연구에서는 게이트 절연층으로 최적화하기 위하여 $HfO_2$ 박막의 nano-mechanical properties를 자세히 조사하였다. 시료는 rf magnetron sputter를 이용하여 Si (silicon) 기판 위에 Hafnium target으로 산소유량(4, 8 sccm)을 달리하여 증착하였고, 이후 furnace에서 400에서 $800^{\circ}C$까지 질소분위기에서 20분간 열처리를 실시하였다. 실험결과 산소 유량을 8 sccm으로 증착한 시료가 열처리 온도가 증가할수록 누설전류 특성 성능이 우수 해졌다. Nano-indenter로 측정하고 Weibull distribution으로 정량적 계산을 한 결과, $HfO_2$ 박막의 stress는 as-deposited 시료를 기준으로 $400^{\circ}C$에서는 tensile stress로 변화되었다. 그러나 온도가 증가(600, $800^{\circ}C$)할수록 compressive stress로 변화 되었다. 특히, $400^{\circ}C$ 열처리한 시료에서 hardness 값이 (산소유량 4 sccm : 5.35 GPa, 8 sccm : 5.54 GPa) 가장 감소되었다. 반면에 $800^{\circ}C$ 열처리한 시료에서는(산소유량 4 sccm : 8.09 GPa, 8 sccm : 8.17 GPa) 크게 증가된 것을 확인하였다. 이를 통해 온도에 따른 $HfO_2$ 박막의 stress 변화를 해석하였다.

• 한국진공학회지
• /
• 제13권1호
• /
• pp.34-38
• /
• 2004

핫엠보싱 기술을 이용하여 고분자 광도파로를 제작하기 위해서는 핫엠보싱 마스터가 필수적이며, 본 연구에서는 deep-RIE 공정에 의해 실리콘 마스터를 제작하였다. 광도파로의 광손실과 직접 연관이 있는 실리콘 마스터의 측면 거칠기를 최소화하기 위해 deep-RIE 공정 수행 후, 온도 $1050^{\circ}C$에서 $H_2/O_2$ 분위기하에 산화층을 각각 400$\AA$, 1000$\AA$, 3000$\AA$, 4500$\AA$, 5600$\AA$ 및 6200$\AA$ 두께로 형성하였으며, 곧바로 $NH_4$F:HF=6:1 BOE를 사용하여 산화층을 제거하였다. 제작된 마스터의 측면 거칠기를 SPM-AFM을 이용하여 측정하였으며, 측면 거칠기가 scallop 부분의 경우, 산화층 형성과 제거 후, 12nm (RMS)에서 최소 약 6nm (RMS)로 개선되었으며, vertical striation부분은 162nm (RMS)에서 최소 39m (RMS)로 개선됨을 확인하였다.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1175-1180
• /
• 2022

STI는 반도체 소자의 소형화 및 고집적화에 따른 광역 평탄화를 위한 공정 기술로써 많은 연구가 이루어져 왔다. 본 연구에서는 STI의 profile 개선을 위한 방법으로 STI 건식각 후 HF 용액에 의한 pad oxide 습식각과 O₂+CF₄ 건식각을 제안하였다. 이 공정 기술은 기존의 방법보다 소자의 밀집도에 따른 패턴간의 프로파일 불균형과 누설전류의 개선을 나타내었다. 또한 동일한 STI 깊이와 HLD 증착를 갖는 디바이스에 대하여 CMP 후 HLD 두께를 측정한 결과 디바이스 밀도에 따라 측정값이 다르게 나타났고 이는 CMP 후 디바이스 밀도에 따른 질화막의 두께 차이 및 슬러리의 선택비에 기인됨을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.11-11
• /
• 2010

Thin-film-transistors (TFTs) that can be deposited at low temperature have recently attracted lots of applications such as sensors, solar cell and displays, because of the great flexible electronics and transparent. Transparent and flexible transistors are being required that high mobility and large-area uniformity at low temperature [1]. But, unfortunately most of TFT structures are used to be $SiO_2$ as gate dielectric layer. The $SiO_2$ has disadvantaged that it is required to high driving voltage to achieve the same operating efficiency compared with other high-k materials and its thickness is thicker than high-k materials [2]. To solve this problem, we find lots of high-k materials as $HfO_2$, $ZrO_2$, $SiN_x$, $TiO_2$, $Al_2O_3$. Among the High-k materials, $Al_2O_3$ is one of the outstanding materials due to its properties are high dielectric constant ( ~9 ), relatively low leakage current, wide bandgap ( 8.7 eV ) and good device stability. For the realization of flexible displays, all processes should be performed at very low temperatures, but low temperature $Al_2O_3$ grown by sputtering showed deteriorated electrical performance. Further decrease in growth temperature induces a high density of charge traps in the gate oxide/channel. This study investigated the effect of growth temperatures of ALD grown $Al_2O_3$ layers on the TFT device performance. The ALD deposition showed high conformal and defect-free dielectric layers at low temperature compared with other deposition equipments [2]. After ITO was wet-chemically etched with HCl : $HNO_3$ = 3:1, $Al_2O_3$ layer was deposited by ALD at various growth temperatures or lift-off process. Amorphous InGaZnO channel layers were deposited by rf magnetron sputtering at a working pressure of 3 mTorr and $O_2$/Ar (1/29 sccm). The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. The TFT devices were heat-treated in a furnace at $300^{\circ}C$ and nitrogen atmosphere for 1 hour by rapid thermal treatment. The electrical properties of the oxide TFTs were measured using semiconductor parameter analyzer (4145B), and LCR meter.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.