• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.149-154
• /
• 2017

We investigate the availability of $CO_2$ ocean storage by means of chemical conversion of $CO_2$ to the dissolved inorganic carbon (mainly the bicarbonate ion) in seawater. The accelerated weathering of limestone (AWL) technique, which is accelerating the natural $CO_2$ uptake process through the chemical conversion using limestone and seawater, was proposed as an alternative method for reducing energy-related $CO_2$ emission. The method presented in this paper is slightly different from the AWL method. It involves reacting $CO_2$ with seawater and quicklime obtained from alkaline wastes to produce the bicarbonate-rich solution over 100 times more than seawater, which could be released and diluted into the ocean. The released dense bicarbonate-enriched water mass could subside into the deeper layer because of the density flow, and could be sequestrated stably in the ocean.

• Journal of Urban Science
• /
• v.9 no.2
• /
• pp.13-20
• /
• 2020

The Recently, several countries have been affected by respiratory diseases, resulting in renewed research interest in their prevention and control. One such example was the 2015 outbreak of Middle East Respiratory Syndrome (MERS) in South Korea and COVID-19. In this study, we performed experiments and simulations based on concentration decay using CO2 as the tracer gas to elucidate the pollutant-removal efficiency for different inlet and exhaust locations and outdoor air-supply ratios. The wall inlet exhibited a higher pollutant-removal efficiency, owing to the upward movement of the air from the lower zone to the upper one. In conclusion, it is recommended that a total air-conditioning plan for isolation rooms be established as well as efficient system operation for pollutant removal and air-flow control to prevent the transmission of infections from the patients to others.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.302-311
• /
• 2014

The purpose of this study was to investigate on parenting stress, parenting guilt feelings and separation anxiety and alternative care in nurses. Data were collected from nurses with preschooler at 2 hospitals from August 2013 to January 2014. Self reported questionnaires were used to collect data from 163 nurses. There were significant differences according to the age, satisfaction of work place and co-worker, spouse support of parenting in parenting stress, parenting guilt feelings and separation anxiety in common. The majority type of alternative care was surrogate foster home when they went to work. However, there were significant differences according to type of alternative care in parenting stress, parenting guilt feelings and separation anxiety. Particularly, those who use child day-care center and surrogate foster home showed more parenting guilt feelings and separation anxiety in Scheffe post-hoc comparison. As a result, it is needed to be improvement of working conditions and policy for nurses' parenting support to continue work.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.160-163
• /
• 2008

$CO_2$ ocean sequestration is being considered as a way to earn a frame of time to change other industrial life pattern to overcome the global warming crisis. The method is to dilute the captured $CO_2$ into ocean by ejecting the liquefied $CO_2$ through nozzles. The main issue of such method is the effectiveness and safety, and in both problems the rising speed of those LCO2 droplet is the key parameter. In this paper, the rising speed of LCO2 droplets is numerically studied including the effect of the surfactant which can be residing along the density interface of the droplets. A front tracking method with a simple surface tension model is developed and the rising speed of the droplets is carefully investigated with varying the various parameters. It is demonstrated that the variable surface tension can change the deformation of the droplet, the flow near the interface, and the rising speed.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.24-30
• /
• 2010

This study utilises repeated numerical tests to understand the effects of variable near-surface conditions on time-lapse seismic surveys. The numerical tests were aimed at reproducing the significant scattering observed in field experiments conducted at the Naylor site in the Otway Basin for the purpose of $CO_2$ sequestration. In particular, the variation of elastic properties of both the top soil and the deeper rugose clay/limestone interface as a function of varying water saturation were investigated. Such tests simulate the measurements conducted in dry and wet seasons and to evaluate the contribution of these seasonal variations to seismic measurements in terms of non-repeatability. Full elastic pre-stack modelling experiments were carried out to quantify these effects and evaluate their individual contributions. The results show that the relatively simple scattering effects of the corrugated near-surface clay/limestone interface can have a profound effect on time-lapse surveys. The experiments also show that the changes in top soil saturation could potentially affect seismic signature even more than the corrugated deeper surface. Overall agreement between numerically predicted and in situ measured normalised root-mean-square (NRMS) differences between repeated (time-lapse) 2D seismic surveys warrant further investigation. Future field studies will include in situ measurements of the elastic properties of the weathered zone through the use of 'micro Vertical Seismic Profiling (VSP)' arrays and very dense refraction surveys. The results of this work may impact on other areas not associated with $CO_2$ sequestration, such as imaging oil production over areas where producing fields suffer from a karstic topography, such as in the Middle East and Australia.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.63-68
• /
• 2009

The motion of a rising liquid droplet is different that of a bubble motion. Treatment of liquid drops is more complex because internal motion must be considered. A 3D unstructured CFD code has been developed to solve incompressible N-S equation for the droplet simulation. This front-tracking consideration which the interface is tracked explicitly is very available to apply for not only exact interface topology but also the high schmidt number issue, such as $CO_2$ dissolution. This paper is forced on the zig-zag motion of the liquid droplet. The simulation shows that if the rising droplet is located at the corner of the zig-zag path, the velocity is low and shape of the droplet is more spherical shape, results in the less drag coefficient. Twin horse shoe vortexes behind the rising droplet are presented and the topology of the droplet is compared with an experimental result during one period of the path.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2024

In-situ carbonation technology represents a form of mineral carbonation that integrates CO₂ into the fabrication process of cementitious construction materials, capturing CO₂ as calcium carbonate(CaCO₃) through a reaction between calcium ions(Ca²⁺) and CO₂ released during cement hydration. This investigation examines the application of in-situ carbonation technology to a variety of floor dry cement mortar formulations commonly used in local construction projects. It assesses the effects of varying the CO₂ injection flow rate and total volume of CO₂ injected. Additionally, the study evaluates the impact of reducing the quantity of cement used as a binder on the final product's quality.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.44-49
• /
• 2006

In this study, the resolution capabilities of electrical resistivity tomography (ERT) in the monitoring of $CO_2$ injection are investigated. The pole-pole and bipole-bipole electrode configuration types are used between two uncased boreholes straddling the $CO_2$ plume. Forward responses for an initial pre-injection model and three models for subsequent stages of $CO_2$ injection are calculated for the two different electrode configuration types, noise is added and the theoretical data are inverted with both L1- and L2-norm optimisation. The results show that $CO_2$ volumes over a certain threshold can be detected with confidence. The L1-norm proved superior to the L2-norm in most instances. Normalisation of the inverted models with the pre-injection inverse model gives good images of the regions of changing resistivity, and an integrated measure of the total change in resistivity proves to be a valid measure of the total injected volume.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.253-259
• /
• 2012

Disposal of high amount of coal combustion by-products, such as fly ash and bottom ash, is of a great concern to the country, due to the huge treatment cost and land requirement. On the other hand, those coal-ash wastes are considered to have desirable characteristics that may improve physical, chemical, and biological properties of soils. Especially, compared with fly ash, bottom ash has a larger particle size, porous surface area, and usable amount of micronutrients. In the present study, we examined bottom as a soil amendment for mitigating $CO_2$ emission and enhancing carbon sequestration in soils fertilized with organic matter (hairy vetch, green barely, and oil cake fertilizer). Through laboratory incubation, $CO_2$ released from the soil was quantitatively and periodically monitored with an enforced-aeration and high-temperature respirometer. We observed that amendment of bottom ash led to a marked reduction in $CO_2$ emission rate and cumulative amount of $CO_2$ released, which was generally proportional to the amount of bottom ash applied. We also found that the temporal patterns of $CO_2$ emission and C sequestration effects were partially dependent on the relative of proportion labile carbon and C/N ratio of the organic matter. Our results strongly suggest that amendment of bottom ash has potential benefits for fixing labile carbon as more stable soil organic matter, unless the bottom ash contains toxic levels of heavy metals or other contaminants.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.121.2-121.2
• /
• 2011

석탄가스화복합발전과 연계하여 사용할 수 있는 $CO_2$분리법으로 연소 전 탈탄소화는 연료가 연소되기 전에 $CO_2$를 회수하는 방법으로 현재 여러가지 분리법이 사용되고 있다. 본 연구에서는 가스 하이드레이트의 다양한 응용 분야 중 이산화탄소 격리분야에서 합성가스로부터 $CO_2$롤 효과적으로 분리/회수하기 위하여 가스 고형화법에 관한 연구를 진행하였다. 가스 하이드레이트 형성과정에서의 반응 특성을 살펴보기 위하여 순수계와 촉진제 첨가계(TBAB, TBAF, THF)에 대하여 반응시간에 따른 가스소모량 및 기상의 $CO_2$ 조성 변화를 측정하였다. 그 결과 하이드레이트 상에 고농도의 $CO_2$가 포집되는 것을 확인 할 수 있었다. 순수계와 THF 첨가계의 경우 가스 소모량이 다른 계에 비하여 높게 나타났다. 이는 순수계의 경우 구조-I의 큰 동공과 작은 동공에 모두 기체가 점유되기 때문이며, THF 첨가계의 경우 구조-II의 큰 동공에만 기체가 점유되지만 THF의 첨가로 인해 전환율이 증가되기 때문이다. 반면, TBAF와 TBAB 첨가계의 경우에는 상재적으로 낮은 가스 소모량을 보였다. 기체 소모량이 큰 경우 최종 기상의 $CO_2$ 조성이 낮게 나타났다. 그리고 모든 실험조건에서 1시간 이내에 하이드레이트 형성반응이 종결되는 것을 확인할 수 있었다. 또한, 촉진제 첨가에 의한 하이드레이트의 구조적인 변화를 확인하기 위하여 Raman 분광법과 $^1H$-NMR을 이용하여 혼합가스 하이드레이트를 분석하였다. 본 실험으로 얻어진 결과는 가스 고형화법을 이용한 합성가스 분리 공정 설계 및 개발에 중요한 기초자료가 될 것으로 사료된다.