• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.183-190
• /
• 2000

This study aims at making a research into the physical and chemical properties of the neolithic era potterys, which are unearthed from Gosanli, Sagaeli, Bukchonli, Samyangdong and Gonaili districts in Cheju Island, by using X-ray diffraction, X-ray fluorescence spectrometer and Mossbauer spectroscopy. This results are as follows. The principal component of five plain coarse pottery sherds by X-ray fluorescence spectrometer and X-ray diffraction spectrum at the room temperature is silicate mineral which is equal to SiO$_2$, and they also have a little magetite, hematite and goethite. The most existent Fe is Fe$\^$+3/ through Mossbauer spectroscopy analysis of plain coarse pottery sherds and it is presumed that the magnetic hyperfine splitting caused this result. The ratio of Fe$\^$2+//(Fe$\^$2+/+Fe$\^$3+/) is mostly zero by Mossbauer spectrum at the room temperature of plain coarse pottery sherds and it is thought because they were fired in the atmosphere.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.88-93
• /
• 2013

In order to construct a controlled release system of drugs and to reduce toxic side effects of 5-fluorouracil, the novel ramose chitosan-based-5-fluorouracil microspheres (CS-FU-MS) were prepared. Firstly, using chitosan (CS) as carriers and 5-fluorouracil (5-FU) as a model drug, ramose chitosan-based-5-fluorouracil (CS-FU) was efciently synthesized by chemical crosslinking method through microwave irradiation, drug loading was 10.6%; Secondly, CS-FU-MS were prepared by CS-FU self-assembled under the dialysis conditions and the free 5-FU was encapsulated further at the same time. The size dispersivity of particles is uniform, and the average diameter of the CS-FU-MS was $4{\mu}m$. The drug encapsulation efficiency was 76.1%, and the drug loading was increased to 26.22%. CS-FU-MS maintain the zero-order release time in PBS (pH = 7.4) and HCl/KCl (pH = 1.2) dialysis medium was 40h and 34h respectively, and the cumulative release were 58.89% and 79.33% in 182 h. The results showed that CS-FU-MS have excellent sustained release properties.

• Computational Structural Engineering
• /
• v.3 no.1
• /
• pp.71-81
• /
• 1990

The isolation system is installed at the base of a structure for reduction of the earthquake damage to the structure. In the 1970', when the laminated rubber bearing(LR type) is developed, the isolation system is put in practice. And recently a new isolation system(SR type), including the laminated rubber bearing with the friction plate beneath, is developed. In this thesis, a study on the base isolation effect, for various of the isolation system and structure properties, is performed. The results of this parameter study show that the isolation system can reduce the earthquake damage of the building structures significantly. As the period of isolation system increases, the isolation effect increases and converges to zero damage. As the number of story increases, the isolation effect reduces. It is found that SR type isolation system is more effective than LR type because SR type base isolation system reduces acceleration, drift and total displacement.

• Journal of Fisheries and Marine Sciences Education
• /
• v.21 no.3
• /
• pp.451-458
• /
• 2009

The purpose of this study is to analyze the nutrition composition and physiological changes, and to evaluate the food quality of live fish in cultured and wild fishes which have been kept in an aquarium tank. The moisture and lipid content of wild and cultured fishes when kept in an aquarium tank for seven-days storage was found to be lower than those of the initial stage storage(zero day). The breaking strength was also rapidly decreased in all of live fishes tested in this study as the periods of storage extended. The protein content did not differ significantly. However, the content of cortisol, which is a indicator indicating a stress reaction in tissues, was apt to increasing as the periods of storage extended. The cortisol content of wild fishes were higher than those of cultured fishes. On the other hand, the activity of activities of alanine aminotransferase (ALT) and aspartate aminotransferase (AST), which is also a indicator indicating a stress reaction, were not changed in the serum of wild and cultured fish, suggesting the ALT and AST activity dose not directly related with a healthy loss originated from stress. The death ratio of wild fishes were higher than cultured ones due to limited activity and stress during the storage in a aquarium tank.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1274-1285
• /
• 1991

This paper presents a statistical convergence analysis of the normalized least mean square(NLMS)algorithm that employs a single-pole lowpass filter, In this algorithm the lowpass filter is used to adjust its output towards the estimated value of the input signal power recursively. The estimated input signal power so obtained at each time is then used to normalize the convergence parameter. Under the assumption that the primary and reference inputs to the adaptive filter are zero mean wide sense stationary, and Gaussian random processes, and further making use of the independence assumption. we derive expressions that characterize the mean and maen squared behavior of the filter coefficients as well as the mean squared estimation error. Conditions for the mean and mean squared convergence are explored. Comparisons are also made between the performance of the NLMS algorithm and that of the popular least mean square(LMS) algorithm Finally, experimental results that show very good agreement between the analytical and emprincal results are presented.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.5
• /
• pp.226-231
• /
• 2001

The $Mg_{1-x}Sr_xTiO_3\;(x=0.02{\sim}0.08)$ ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1250^{\circ}C{\sim}1350^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite $SrTiO_3$ and ilmenite $MgTiO_3$ structures were coexisted in the $Mg_{1-x}Sr_xTiO_3\;(x=0.02{\sim}0.08)$ ceramics. The dielectric constant( ${\epsilon}_r$) was increased with addition of $SrTiO_3$. The temperature coefficient of resonant frequency( ${\tau}_f$) was gradually varied from negative value to the positive value with increasing the $SrTiO_3$. The temperature coefficient of resonant frequency of the $Mg_{1-x}Sr_xTiO_3(x=0.036)$ ceramics was near zero, where the dielectric constant, quality factor, and ${\tau}_f$ were 20.65, 95120 and +1.3ppm/$^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.547-550
• /
• 2000

The (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 125$0^{\circ}C$~135$0^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite SrTiO$_3$ and ilmenite MgTiO$_3$ structures coexisted in the (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics. The dielectric constant($\varepsilon$$_{r}$) was increased with addition of SrTiO$_3$. The temperature coefficient of resonant frequency($\tau$$_{f}$) was gradually varied from negative value to the positive value with increasing the SrTiO$_3$. The negative temperature coefficient of resonant frequency of the magnesium titanate was adjusted to near zero at x=0.036, where the dielectric constant, quality factor, and $\tau$$_{f}$ were 20.65, 95120, and +1.3ppm/$^{\circ}C$, respectively. The temperature stability of qualify factor in (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics increased as the amount of MgTiO$_3$./TEX>.

• Journal of Elementary Mathematics Education in Korea
• /
• v.16 no.1
• /
• pp.21-38
• /
• 2012

In this study, elementary mathematics textbooks from grade 1 to grade 6 of Korea and Yanbian Korean Autonomous Prefecture are compared. This study is limited to number area. In this study, textbooks of Korea are developed according to the 2007 curriculum and published between 2009 and 2011 and textbooks of Yanbian are published between 2009 and 2010. Seven implications for developing Korean textbooks can be drew from Yanbian textbooks as conclusions. First, it is necessary to consider using counters to teach place values. Second, it is necessary to consider reading inequalities in style of one to one correspondence between signs and words. Third, it is necessary to consider mentioning explicitly that it is possible to express the concrete whole which has a continuous quantity as natural number 1. Fourth, it is necessary to consider introducing term of fraction line that separates the numerator and denominator. Fifth, it is necessary to consider mentioning explicitly the properties of the fraction. Sixth, it is necessary to consider broadening examples to use decimals. Seventh, it is necessary to consider stating clearly that it is possible to make an additional place of decimals by adding a zero at the right end of the decimals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.49-49
• /
• 2007

Glass infiltration 방법을 이용하여 '$A_2O_3$/Glass/$Al_2O_3$' 구조의 무수축 LTCC 기판을 제조하였다. Glass infiltration 법에 의한 무수축 기판 제조에 있어 가장 중요한 요소로는 Glass의 점성은 낮고, alumina에 대한 Glass의 젖음성 (wettability)이 좋으며. 낮은 반응성이 요구되기 때문에 Glass의 조성 선정이 무엇보다 중요하다. 본 연구에서는 Na, Pb, Mg 계열의 각기 다른 glass들의 alumina에 대한 젖음성을 평가하여 젖음성 및 치밀성이 우수한 Pb 계열의 Glass를 이용하여 LTCC 기판으로 적용 가능한 온도인 $700{\sim}900^{\circ}C$에서 '$A_2O_3$/Glass/$Al_2O_3$'구조의 glass infiltration 특성을 고찰하였다. 소성 후 수축율은 x-y축 0.2%, Z축 40%, 밑도 $3.8g/cm^3$, 유전율 6.8, 품질계수 552로 무수축 기판으로서의 적용 가능성을 확인하였다.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.251-257
• /
• 2015

Heavy oil production is receiving significant attention because of increased demands for thermal power generation systems of the diesel engine and boilers. However, asphaltene, which is a heavy oil components (6-8 wt%), reduces the heat efficiency of the fuels owing to its agglomerated sludge of asphaltene during the burning process. Therefore, for hassle-free operation, we should develop asphaltene dispersants to suppress the formation of the sludge. We prepare variable salt-type polymeric dispersants using poly(isobutenyl succinic anhydride) and poly(amine) through both condensation esterification and acid-base neutralization reactions, which we subsequently evaluate for dispersing performance, using Turbiscan measurement. Total acid number (TAN) and total base number (TBN) of 75Lec-25SynDis.2 composed of lecithin and the prepared polymeric salt having the ratio of 3 : 1 are 18.9 and 33.7 mg KOH/g, respectively, which are comparable to those of the commercial dispersants (15.8 and 26.5 mg KOH/g). We determine the initial turbidity observed for 15 min of the polymeric dispersant was determined with transmittance (%), which can be calculated to separability number (SN). The SN value of 75Lec-25SynDis.2 is close to zero, which is superior to that of commercial dispersants and lecithin (0.015 and 0.017).