• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.121-125
• /
• 2003

Time-resolved photoluminescence from InGaN/GaN multi-quantum well structures was investigated for two different shapes of square- and trapezoidal wells grown by metal-organic chemical vapor deposition. To compare to the conventional square well structure with a radiative recombination lifetime of 0.170 nsec, the large value of lifetime of 0.540 nsec from trapezoidal well were found at room temperature. This value is similar to the value for GaN host material indicating no confinement effect of quantum well. Furthermore, the high resolution transmission electron microscopy image provides the In clustering effect in the trapezoidal well structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.106-113
• /
• 2000

This study describes how a properly calibrated simulation method could be used to investigate the latchup immunity characteristics among the various high energy ion implanted CMOS twin well (retro-grade/BILLI/BL) structures. To obtain the accurate quantitative simulation analysis of retrograde well, a global tuning procedure and a set of grid specifications for simulation accuracy and computational efficiency are carried out. The latchup characteristics of BILLI and BL structures are well predicted by applying a calibrated simulation method for retrograde well. By exploring the potential contour, current flow lines, and electron/hole current densities at the holding condition, we have observed that the holding voltage of BL structure is more sensitive to the well design rule (p+to well edge space /n +to well edge space) than to the retrograde well itself.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.829-834
• /
• 2002

Recently, research and development for a number of repairing material like an epoxy-based material and polymer-cementitious material as well as anti-washout underwater concrete have been carried out. But, the study on tile materials for the concrete structure exposed to a wetted condition is at a standstill and there are not any suitable reference data at a repairing work for the concrete structure at a splash as well as a structure under severe moisture condition. In this study, the material, called as “ceramic metal”, with an excellent mobility and plasticity as well as with a high bond strength and durability of freezing-thawing resistant properties under any environmental conditions was developed. And, the experimental evaluations for the utility wert widely performed.

• Journal of the Optical Society of Korea
• /
• v.11 no.3
• /
• pp.133-137
• /
• 2007

We compare electroabsorption modulators (EAMs) with multiple quantum wells (MQWs) based on InGaAs(P)/InP and InGa(Al)As/InAlAs material systems. We carefully choose the quantum-well structures so that the structures based on different material systems have similar band-offset energies and excition-peak wavelengths. Assuming the same light wavelength of $1.55{\mu}m$, we show the transfer functions of EAMs with each quantum-well structure and calculate the escape times of photogenerated charge carriers. As the heavy-hole escape time of the quantum well based on InGaAs(P)/InP is much longer than those of photogenerated charge carriers of InGa(Al)As/InAlAs, the EAM based on the InGa(Al)As/InAlAs material seems to be more suitable for high-optical-power operation.

• Journal of the Korean Society of Costume
• /
• v.56 no.3 s.102
• /
• pp.28-41
• /
• 2006

The purposes of this study were to analyze 'well-being' lifestyle pursuits depending on consumer types and to classify female consumer types according to their 'well-being' awareness. This study also intended to examine the levels of consumers' participation in pursuing a 'well-being' lifestyle, and to find female consumers' characteristics related to well-being lifestyle. The results of study were as follows: First, female consumers were classified in terms of their lifestyle by using their participation in, and awareness of well-being concerns. The results were divided into four groups: society/family-oriented group, 'well-being' oriented leading group, trend-oriented material wealth pursuit group, and selt~centered/fashionable appearance-oriented group. Second, the results of examining characteristics by female consumer type in terms of their pursuit of a well-being lifestyle show that the 'well-being' oriented leading group had the greatest number of innovators and followers. Also, the trend-oriented material wealth pursuit group consisted of mostly medium level participants, and the self-centered/fashionable appearance-oriented group had the greatest number of 'well-being' lifestyle bystanders. With regards to practical participation group, significant differences were found in the sections of 'health', 'leisure' and 'whole', except for 'appearance management'. With regards to purchase experience of 'well-being' products, the health-oriented leading group was the highest participation level in the sections of 'clothes' and 'food', except for 'residence', in which the society/family-oriented group was the highest. Third, demographical characteristics within female consumer types classified by 'well-being' lifestyle showed that the society/family-oriented group had a high percent of. dedicated housewives in their forties or fifties, and the trend-oriented material wealth pursuit group has a high percent of married people in their twenties or thirties. Also, the self-oriented/fashionable appearance-oriented group had a high percent of unmarried. people in their twenties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.17-20
• /
• 2000

This study is about a retrograde triple well employed in the Cell tr. of next DRAM and flash memory. Triple well structure is formed deep n-well under the light p-well using MeV ion implantation. MeV P implanted deep n-well was observed to show greatly improved characteristics of electrical isolation and soft error. Junction leakage current, however, showed a critical behavior as a function of implantation and annealing conditions. {311} defects were observed to be responsible for the leakage current. {311} defects were generated near the R$\_$p/ (Projected range) region and grown upward to the surface during annealing. This is study on the defect behavior in device region as a function of implantation and annealing conditions.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.5
• /
• pp.19-23
• /
• 2003

Time-resolved photoluminescence from InGaN/GaN multi-quantum well structures was investigated for two different shapes of square-and trapezoidal wells grown by metal-organic chemical vapor deposition. To compare to the conventional square well structure with a radiative recombination lifetime of 0.170 nsec, the large value of lifetime of 0.540 nsec from trapezoidal well were found at room temperature. This value is similar to the value for GaN host material indicating no confinement effect of quantum well. Furthermore, the high resolution transmission electron microscopy image provides the In clustering effect in the trapezoidal well structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.221-225
• /
• 1994

We described the impact ionization rates of electron in GaAs/AlGaAs MQH(multi- quantum well) using EMC(ensenble Monte Carlo) simulation. Hot electron energy of injected into quantum well is increasing nearly liearly due to the applied electric field to the barrier of MQM inspite of various Al mole fraction in AlGaAs or barrier width. Impact ionization rates are decreasing exponentially by increasing Al mole fraction, and they have peak vague due to the barrier width.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.129-145
• /
• 2020

In typical, structural topology optimization plays a significant role to both increase stiffness and save mass of structures in the resulting design. This study contributes to a new numerical approach of topologically optimal design of Mindlin-Reissner plates considering Winkler foundation and mathematical formulations of multi-directional variable thickness of the plate by using multi-materials. While achieving optimal multi-material topologies of the plate with multi-directional variable thickness, the weight information of structures in terms of effective utilization of the material at the appropriate thickness location may be provided for engineers and designers of structures. Besides, numerical techniques of the well-established mixed interpolation of tensorial components 4 element (MITC4) is utilized to overcome a well-known shear locking problem occurring to thin plate models. The well-founded mathematical formulation of topology optimization problem with variable thickness Mindlin-Reissner plate structures by using multiple materials is derived in detail as one of main achievements of this article. Numerical examples verify that variable thickness Mindlin-Reissner plates on Winkler foundation have a significant effect on topologically optimal multi-material design results.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.603-623
• /
• 2022

This article is dedicated to predict the natural frequencies of joined conical shell structures made of Functionally Graded Material (FGM). The structure includes two conical segments. The equivalent material properties are found by using the rule of mixture based on Voigt model. In addition, three well-known patterns are employed for distribution of material properties throughout the thickness of the structure. The main objective of the present research is to propose a novel exponential pattern and obtain the related equivalent material properties. Furthermore, the Donnell type shell theory is used to obtain the governing equations of motion. Note that these equations are obtained by employing First-order Shear Deformation Theory (FSDT). In order to discretize the governing system of differential equations, well-known and efficient semi-analytical scheme, namely Generalized Differential Quadrature Method (GDQM), is utilized. Different boundary conditions are considered for various types of single and joined conical shell structures. Moreover, an applicable modification is considered for the continuity conditions at intersection position. In the first step, the proposed formulation is verified by solving some well-known benchmark problems. Besides, some new numerical examples are analyzed to show the accuracy and high capability of the suggested technique. Additionally, several geometric and material parameters are studied numerically.