• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.451-459
• /
• 2012

Background: In Korea, a healthy 36-year-old man developed acute interstitial pneumonitis soon after inhaling a waterproofing spray which he had applied at home to his outdoor jacket. Objectives: The objectives of this study were to review cases of varying degrees of respiratory toxicity and poisoning in connection with the use of waterproofing spray and summarize major reasons for cases of poisoning. Methods: We searched articles reporting on a combination of a waterproofing agent and/or respiratory symptoms, including acute respiratory syndrome, lung injury, pneumonia, pulmonary toxicity, and respiratory disease. Results: We reviewed a number of cases of varying degrees of respiratory toxicity and poisoning resulting from inhalation of waterproofing spray containing fluorocarbon co-polymer, solvents and propellants reported in a variety of countries. The literature searches concluded that among the ingredients of waterproofing agents, fluorinated polymer may cause acute respiratory health effects. Conclusion: Environmental policy should be implemented in order to prevent consumers from using household and industrial products including waterproofing agents. In addition, a national surveillance system should be created to collect cases of poisoning caused by the use of consumer products.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.7-12
• /
• 2008

We constructed Seal type waterproofing with adhesive and swelling properties in the field of construction work as yet. But we have many problems of seal type waterproofing with adhesive and swelling properties for construction. Because it has high viscosity, so wokers are too adhered for the work. So, we developed and applied about the high temperature and spray equipments of piston type better than before. We able to be expect that cost reduction and increase construction ability by high temperature and spray equipments of piston type.

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.141-148
• /
• 2003

This study deals with the estimation of material properties according to the construction condition for water-soluble rubberized asphalt waterproofing material of spray type. In this study, the waterproofing material property by the spray construction method is suggested by means of estimation its tensile performance and temperature dependency according to mix proportion ratio(4:1, 8:1), referenced viscosity and solid content (A:360cps, 76%, B:580cps, 79%, C:490cps, 70%), spray angle($30^{\circ}$, $45^{\circ}$, $60^{\circ}$), and spray distance(30cm, 50cm, 70cm). The result of testing are as follows. (1) The mix proportion ratio of principal agent and hardener is 4:1. (2) The viscosity referenced and solid content are 490cps and 70%. (3) The spray angle referenced is $45.^{\circ}$ (4) The distance referenced from concrete surface to spray gun is 40~50cm.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.77-81
• /
• 2004

The massive structures are not free to move with vibration, differential settlement, thermal stresses because, construction and expansion joint, crack etc., can be large enough to cause leakage as deformation of waterproofing. It has been depended on the test method of tensile/tear strength which is waterproofing performance as behavior of concrete structure crack. However, not to practically confirm the creep applied to concrete surface, even waterproofing membrane have more performance than definite strength and elasticity. Therefore, in this study will focus on the test method to consider a resistance performance about loose adhesion and deformation of waterproofing and behavior of concrete structure as construction/expansion joint, crack. Performance test method on the influence as behavior of concrete structure crack is to choose waterproofing materials and construction method which possible to confront with behavior of 50mm crack in the atmosphere and low temperature. Examine the deformation of waterproofing membrane and loose adhesion which can occur to structure in general job site, suggest standard testing method to analyze correlation waterproofing membrane and structure with 5-types of materials used in this study, such as Adhesion membrane and sheet complex, sheet and urethane complex, self-adhesive sheet, spray poly-urea, spray membrane of rubberized Asphalt.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.551-565
• /
• 2017

차수용 박층 멤브레인은 폴리머를 주요 구성성분으로 하는 재료로서 높은 부착성능과 시공성을 특징으로 하는 방수 재료이다. 차수용 박층 멤브레인은 일반적으로 콘크리트 또는 숏크리트 라이닝과 일체화되어 복합 구조체 형태로 방수 기능을 발현하는 재료이다. 본 연구에서는 지하구조물의 대표적인 구조물인 터널에서 차수용 박층 멤브레인 타설이 가능한 콘크리트 라이닝 재료에 차수용 박층 멤브레인을 적용할 경우 콘크리트 라이닝의 거동 변화를 수치해석적 방법으로 검토하였다. 콘크리트 라이닝의 거동은 3점 휨 시험을 수행하는 것으로 가정하고 이때 발생한 하중-변위 관계를 통해 콘크리트 라이닝의 최대 휨 하중 변화와 항복 이후 변화를 검토하는 방법으로 연구를 수행하였다. 해석결과, 콘크리트 라이닝에 차수용 박층 멤브레인 시공을 통해 고려할만한 보강효과를 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.33-39
• /
• 2009

Asphalt waterproofing method has a long history over 80years since introduce to domestic market. This method has a good point as high water proofing not permeable to water by material performance of bitumen, In spite of high waterproofing, the application has become decreased. This asphalt method has some problem such as work safety, low workability by complicated work process, environmental problem in job site, it should be solve by complementary measures. 'Therefore, in this paper, suggest the principle of high pressure spray by heat cycle type equipment by analysis of exist problem and materials investigation. And. study and examine the spray type degeneration rubberized asphalt membrane materials to adopt job site. Moreover, suggest the evidence by inspection about waterproofing performance by Korean Industrial Standard through the performance test of the spray type degeneration rubberized asphalt membrane materials.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.93-102
• /
• 2018

차수용 박층 멤브레인은 폴리머로 구성된 재료로 기존 방수포(sheet membrane)를 대체할 수 있는 뿜어 붙이는 방식의 차수 재료이다. 시공에 있어서 뿜어 붙이는 방식을 사용하기 때문에 타설이 용이하고 상대적으로 높은 부착성능을 보인다. 차수용 박층 멤브레인의 배합은 영구 지보재로 쓰이는 TSL(Thin Spray-on Liner)와 매우 유사한 구성을 갖으나 적용 목적에 따라 차수와 지보재로 구분하고 있다. 본 연구에서는 차수용 박층 멤브레인의 차수 성능을 확보한 상태에서 구조적인 성능을 보강할 수 있도록 배합비를 조절하였다. 이를 검토하기 위해, 영구 지보재용 멤브레인 재료에 사용되는 성능 기준에 따라 시험을 수행하고 결과를 검토하였다. 시험결과 본 연구에서 고려한 차수용 박층 멤브레인의 구조적 성능은 영구 지보재로도 사용이 가능한 정도의 성능을 보였다.

• 한국건설관리학회논문집
• /
• 제10권5호
• /
• pp.123-134
• /
• 2009

1970 년대 이후, 우레탄 도막방수공법은 자외선에 강하고 탄성 및 수밀성이 뛰어나 지붕 및 지하바닥, 스포츠경기장 등에 널리 활용되고 있다. 그러나 옥상 및 지하공간은 미끄럼으로 인한 위험이 많고 다양한 외력으로 하자발생이 빈번하여, 미끄럼방지기능 및 내구성을 향상시켜야 하고 사용자의 편의성 및 심미적 측면의 기능성을 고려한 우레탄 도막방수공법의 개발이 절실하다. 따라서 기존 우레탄의 장점을 유지하고 성능 및 기능을 향상시킨 다양한 공법이 개발되고 있으며, 최근에 엠보스프레이 코팅시스템(Embo spray coating system)을 활용한 엠보탄(Embo-thane) 도막방수공법이 개발되었다. 본 논문은 엠보탄 도막방수공법의 노출 비노출 바닥재에 대하여 살펴보고 기존의 우레탄 도막방수공법과의 성능 및 기능에 대한 객관적 비교 분석을 실시하기 위하여 인장강도, 신장률, 부착성능, 내마모성, 미끄럼저항성능에 대한 실험적 연구를 실시하였다. 그리고 엠보탄 방수공법의 물리적 성능뿐만 아니라 공법의 설계적 측면을 고려한 평가기준항목 설정과, AHP(Analytic Hierarchy Process)기법을 활용한 VE(Value Engineering)분석을 실시하여, 엠보탄 도막방수공법이 기존의 우레탄 도막방수공법에 비교하여 성능 및 기능에 대한 개선정도를 성능점수(performance index)를 통하여 제시하였다. 또한, 불확실성이 고려된 결과에 대한 평가를 위하여 Monte Carlo Simulation기법을 활용하여 확률적 접근방법을 통한 신뢰도 분석을 실시하고자한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.163-168
• /
• 2001

This study examinated the application in construction field and the development of waterproofing material system by the spray water-soluble rubber asphalt to solve the problems of synthetic polymer sheet and gio membrane(A mat sheet of Bentonite) that had been used domestic waterproofing material in advance. As the result of study, characters of study water-souble rubber asphalt are the follows; 1) The amount of water absorption was '0.06'g and the seepage quantity was '0'g in result. 2) The tensile strength was about 30.7kgf/$cm^2$ and the elongation was about 72.4% in result. 3) After reliance of temperature test had been ended, the tensile strength was about 72.4kg/$cm^2$ in low temperature and about 30.7kgf/$cm^2$ in normal temperature. 4) After acid and alkaline treatment had been ended, the tensile strength was about 19.7kgf/$cm^2$ and about 21.9kgf/$cm^2$ in result. 5) After chlorine ion treatment had been ended, the tensile strength was 28.5kgf/$cm^2$ and the elongation was 250% in result. So, this study can propose the spray water-soluble rubber asphalt to satisfy the security and durability of waste filled land.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.61-65
• /
• 2006

Urethane, epoxy, acrylic have common property to adhere on the concrete dried surface in the waterproofing materials at present. In the wet condition, however, the materials such as urethane, epoxy, acrylic need a long hardening time and it become a reason of water leakage as the materials breaking down. it is one of the problem to adhere to the substrate. Therefore, in this thesis, I focused to assure the structural safety and durability and quality for waterproofing and safe of construction cost by cut down the cost of labor and reduce the term of works as searching the application of field condition for hish adhesive spray type of degenerated and rubberized asphalt membrane material.